Many people choose curtains and valances because they come in a wide range of colors and weights. How much light enters a room is determined by the type of window treatments you use, which can range from sheer to full blackout. For private rooms, use thick curtains, and for shared family areas, use lighter drapes. Use a curtain rod that can withstand the weight of your new window coverings before installation. A larger curtain rod is required for thicker fabrics. Hang curtains and valances correctly by following these guidelines.
6 Easy Steps for Dressing Your Windows
Make sure you have the correct equipment before you begin hanging your window coverings.
- Calibration Tool
- The valance rod
- Drapery Rod
- Brackets for Wall Mounting
Choose the Correct Hardware
Wall brackets for your curtain rod should be half the length of valance brackets. In the example above, if your curtain brackets are 2 inches long, you should use 4 inch valance brackets.
Install Curtain Brackets
With a pencil and a tape measure, mark the first bracket’s location. Longer curtains benefit from curtain rods that are placed higher in the window. Mark the first and second curtain brackets with the pencil. Use a level to make sure the two marks are perfectly aligned. Screw the brackets into your wall once they’ve been leveled.
Install Valance Brackets
Just above the curtain rod, mark the location of your valance brackets using a tape measure and a pen. Before drilling the brackets into the wall, double-check their alignment with a level.
Hang Your Curtain
Run the curtain rod through the curtain tabs and attach it to brackets. Curtain rings and other hardware should be attached to the curtains first, before attaching them to the rod. The rod should then be hung from these brackets.
Hang Your Valance
Use curtain hardware or valance rods to attach the valance, depending on the style of valance you’ve chosen for your window. Make sure that the valance is uniformly distributed by attaching it to its brackets.
What Is A Valance?
Most of you already know what it is and what it looks like, but in case there are those who don’t, here it is.
In other words, it’s a form of window treatment used to conceal the top of a window.
This can be hung by itself. Curtains, shutters, blinds, and shades are commonly used to hang it.
Valances can be used in a variety of ways.
They’re beautiful ornaments that can be employed to achieve a variety of aesthetic goals for a room’s windows.
Depending on your preferences, you can make them more or less ornate or plain.
A valance can add flair, texture, and dimension to your curtain panel if you want to hang one over it.
In addition, a valance can be employed to give your window treatments a more professional feel. Often referred to as “polishing,” this is the process.
What Are The Things Needed?
To begin any project, gather all of the materials you’ll need.
Treating your windows in the same way is also true.
Ensure that you have all the necessary tools before you begin the project.
Tools and materials required to hang a curtain valance include the following:
- Measurement using a piece of tape
- The curtain rod
- Brackets for attaching to the wall
Steps To Hang Valance Over Curtains
Exactly how do you put up a valance on top of curtains?
The following technique will help you get started on your project once you’ve gathered all of the above-mentioned materials.
Step #1. Choosing the right hardware
If you decide to utilize separate curtain and valance rods, keep in mind that the wall brackets for each rod will differ.
One-half of valance rod brackets should be used for curtain pole bracing.
Since curtain rods have a 3-inch length limit, valance rods must be 6-inches long.
Step #2. Installing curtain brackets
Determine the location of the first bracket by measuring using a tape measure and a pencil.
Place the curtain rod high above your window if you plan to hang longer curtains.
Using a pencil, mark the first curtain bracket location and the second curtain bracket location.
After you’ve marked them, use a level to see if they’re properly aligned.
If so, drill them into the wall.
Step #3. Installing valance brackets
When in doubt, drill them into the wall..
Then make a note of it.
Before screwing them into place, make sure they are perfectly aligned.
Step #4. Hanging the curtain
Use a tab-top curtain and slide the rod through each tab before hanging it on the brackets. If you do this, the curtain will stay in place.
As an example, a curtain ring must be attached first to the curtain before it can be attached to the curtain rod.
The curtain rod can then be attached to the bracket at this point.
Step #5. Hanging the valance
It’s time to hang up the rod.
However, if you want to attach the valance to the rod, you might use some curtain hardware.
Regardless of the method you use, be sure to secure the rod to the bracket last.
After that, make any necessary valance adjustments to ensure that the fabric is distributed evenly.
It’s A Wrap!
Window treatments such as valances look fantastic.
They’re available in a variety of weights and colors and can be utilized in a variety of ways, including as a curtain rod.
Make sure the curtain rod you intend to use can handle the weight of the drapes before putting them in place.
When using a single rod for both the curtain and the valance, this is especially true.
Hanging valances over curtains is now a breeze thanks to this tutorial!