Updated at: 12-08-2022 - By: Sienna Lewis

Blinds are a great method to keep your home private, but they’re not always visually appealing. Curtains, on the other hand, are a great way to add elegance and warmth to your home. There are advantages and disadvantages to both types of window treatments, but if you’re a tenant, you’re usually stuck with one. However, this does not have to be the case: You do not have to pick between curtains and blinds, regardless of your circumstances.

Hanging drapes over blinds gives you the best of both worlds. You can use window brackets or command hooks to quickly and easily cover your blinds, including vertical blinds, without having to drill any holes in your walls. There is no need for tension rods here, as tension rods are almost always incompatible with blinds.

Before You Begin

Before you hang curtains, make careful to measure the length and width of the opening. There are two ways to determine how much fabric or how long of a curtain rod to buy: by looking at the length. It is best to get curtain rods longer than the width of your window in order to ensure that they will be secure when you hang them, as an example.

Pin page


Hanging a curtain rod above your window and draping lengthy drapes will make your room appear larger.

What You’ll Need

Equipment / Tools


  • Towel-lined drapes
  • Towel ring
  • Adhesive hooks or two curtain rod brackets (aka Command hooks)
  • There are two screws in the bracket (for brackets)



  • the standard screwdriver set
  • A single piece of measuring tape

Install Brackets or Adhesive Hooks

Installing curtain brackets on your headrail saves you from having to drill holes in your wall. The horizontal bar that runs across the top of your blinds is known as the headrail. Headrail-specific products are available, so if you can, take advantage of them. There is no need for you to drill holes in your wall to install these brackets because they are attached to the headrail. Installing curtain brackets on your headrail is easy because most brackets include the screws you’ll need. The hardware shop is a good place to get basic screws if you don’t have your own.

The simplest technique to hang curtains over vertical blinds is to attach curtain brackets to the headrail of the blind. For Venetian blinds, though, you can consider installing adhesive hooks on the wall on either side of the window to enhance their appearance. Make sure the hooks you choose can hold at least five pounds if you decide to use them. There may be times when more than two adhesive hooks are required to keep your curtain rod in place. To keep the rod in place, insert a third above the window’s center.

When hanging curtains over blinds, avoid using a tension rod since it will obstruct the blinds’ ability to open and close properly. There is a limit to how much weight tension rods can hold, therefore you can only use light curtains on them. The best no-drill option is to use brackets or command hooks.

Put Fabric Curtains on Curtain Rod

Pre-made curtains are an option, but if you’re handy with a sewing machine, you can also make your own. As a result, you will need a pocket that extends the length of your curtains so that you can thread the curtain rod into it. The first step is to make sure that your curtains can close all the way across the rod and the window before you begin.

Place Curtain Rod on Brackets or Hooks

Installing your curtain rod is as simple as inserting it into a bracket and tightening the screw on either end. It’s important to make sure the curtain is balanced and the pole is level. Make sure your drapes and blinds are working properly by opening and closing them.

You may limit the amount of light in your room by using a combination of blinds and curtains. During the day, you can leave them open to let in light, but at night, you should keep them closed to conserve energy.

Curtains and blinds that are used in tandem give you even more seclusion. It’s easy for neighbors to see inside when you just leave your curtains open. You won’t have to be concerned about privacy invasions if you use blinds and curtains. Then, you can concentrate on your work without having to worry about what’s happening outside.

Curtains are also aesthetically pleasing. You’ll be able to regulate light, privacy, and style with the help of blinds and curtains, which may be tailored to fit your area properly.

How to hang curtains to conceal vertical blinds - Engineer Your Space

How to Hang Curtains over Blinds without using Nails and Drills

Three simple no-drill solutions for hanging drapes over blinds are presented here. First and foremost, this is our favorite. You’ll find out why if you keep reading.

  • Using braces for the window (perfect for vertical blinds)
  • Velcro is a good option.
  • Hooking up commands (best for Venetian blinds)

Using Window Brackets (perfect for vertical blinds)

You’ll need the following:

  1. Brackets for curtain rods
  2. Towel ring
  3. There’s no doubt about it: Curtains.
  4. Screws

Let’s go to work, homeowners and tenants, and install this hardware on our blinds!

Step 1: Install your brackets on your headrail

The first thing you need to know about a headrail is what it is. The mechanism of your blind is operated from the top rail, which is called a headrail. When you want to raise or lower your Venetian or vertical blinds, the mechanism is what allows you to do that.

There is no need to make a hole in your wall if you get the NoNo brackets from Amazon. As a result, alter your brackets and place them on both ends of the headrail bar. Make sure the settings are tight, strong, and secure afterward.

Get your brackets for the No No here.

Step 2: Install your curtain rod on your brackets for easy mobility

It’s time to erect your bar after the brackets are in place.

But before you mount the brackets, you must first hang the drapes from the curtain rod. Then attach the bracket on the rod until it feels solid and stable. You don’t need a screwdriver to install the screws that come with the No No brackets.

This drapery installation method, which involves a little give and take, takes around 5 to 10 minutes to accomplish.

Here’s why we prefer tension rods to curtain rods:

  • Curtains can be difficult to remove from tension rods.
  • Tension rods can only support lightweight curtains and aren’t intended for use with larger windows. In contrast, curtain rods are more suited to smaller windows. If you’re still using vertical blinds, this is a good point. It can also carry curtains of any weight, no matter how heavy they are.

Amazon is a great place to buy a curtain rod.

Using Velcro

What you’ll have to have

  1. Velcro that wraps all the way around your cornice for a secure fit.
  2. The material of the drapes

To put curtains over blinds in your room without drilling, you can use Velcro.

Your cornice or headrail bar will serve as a Velcro attachment point here (if yours has got space for it). To finish things off, simply attach your drapes to the opposite wall.

Velcro 12 inch wide is ideal for light-weight curtain materials, such as silk. In addition, use a broader Velcro for heavier curtain materials.

If you want to utilize blackout curtains in your room, house, or office, but also want a certain level of color and/or seclusion, this option is for you.

It’s a good idea to hang your drapes this way, but the negative is that you won’t be able to move your drapes about.

Using Command Hooks

You’ll need the following:

  1. Stainless steel brushed nickel command strip hooks can handle up to 5 lbs. of weight. On Amazon, you may purchase it.
  2. Heavy-duty picture hanging strips from Command can support objects weighing up to 12 pounds. It’s here.
  3. You can’t use a command hook if you have a curtain rod that’s more than an inch long.

Now we’re in business.

Make a right-angle bend in the middle of your picture-hanging strip. The Velcro will stick to each other whether you bend to the left or right.

A command hook can be attached to the back by removing one side of the strip’s lid and putting it on the hook. Then, for about a minute, clench your fists to ensure a firm bond.

Remove the picture-hanging strip’s cover to expose its adhesive side. Hook up the hook to the wall. It should be held there for around 10 seconds. Lift the command hook from the strip. Make no mistake: Your strip is still firmly attached to the wall.

Once you’ve applied the command strip to the wall, place the hook on top of it for roughly 30 seconds.

Step 5: Do the same for the other wall-mounted hook. A few hours later, the hook should be firmly attached to the wall.

It’s time to put up your curtains now. But first, you’ll need to hang the curtains on your bar before attaching them to your hook.

To avoid stretching the command hook and the picture-hanging strip, you’ll need sheer curtains.

To get your curtains up, you don’t actually need a handyman, and you don’t have to drill holes in your walls to do it either.

However, you must first accurately measure your windows before attempting to hang curtains from brackets.

Window treatments and the look of your home could be ruined if you make a mistake here. I know you don’t want it to happen. That being said, let us begin.

Taking Measurements

What you’ll Need

  1. The aforementioned tape measure
  2. Pen
  3. A piece of card stock or paper.

So, here are the five steps you need to follow in order to get accurate measurements for your curtains:

  1. Decide on a technique of installation first. The brackets approach is a great option because it’s quick and straightforward to put together. Curtains that extend beyond the window frame are a good choice when using brackets.
  2. Measure the width of the window up to the area you want to cover with curtains. Make sure your tape measure extends beyond the window frame’s horizontal edges. You should begin measuring at the place where your curtains begin and terminate at the point where they end.
  3. Measure the distance from the floor to the top of the curtain rod. You should measure from the top of your blinds to the floor if you plan to use Velcro or window brackets to attach your shades. In addition, if you’re going to use command hooks, make sure to take measurements higher up, preferably from the ceiling and all the way down to the ground.
  4. After completing steps 2 and 3, you have your lowest and maximum measurements. Since it may be difficult to find curtains that meet your exact measurements, you might proceed to buy curtains that are somewhere in the middle.

While you’re here, here are a few tips for keeping your drapes and blinds looking their best. As an alternative, give your house or space the right finishing touch;

Pairing Curtains and Blinds - Curtain World


  1. First, decide on the style of blinds you want to use for your new curtains before you buy any new curtains. Roller blinds and Venetian blinds are more likely to match drapes than other types of blinds. This time, you should choose curtains in warm hues with timber blinds. In addition, if your house has a lot of cold hues, consider using dark-hued drapes with complementing colors.
  2. Do hang your drapes and blinds close to the ceiling if you have a small room. Make sure your drapes are at least 30-60 cm longer than the width of your windows. You’ll be able to give the impression that your windows are larger and your ceiling is higher this way.
  3. Do not use less than twice the width of your window when hanging drapes over blinds. You should do this if you plan to frequently close them.
  4. Your guests will fall in love with your room if you pair your curtains with your blinds correctly. Blinds and curtains are a must-have if you have large glass windows in your kitchen or any other area. To let in natural light, you might roll up the blinds throughout the daytime. This will give your home a new lease on life while yet protecting your privacy and maintaining a pleasing aesthetic. Roman blinds, which are great for creating a comfortable atmosphere, can be paired with blackout curtains to accomplish this effect.
  5. The drapes and blinds should match the color of the rod. Gold or any other brightly colored rod should never be used. Choose hardware that has a matte finish to match your window treatment.
  6. Window treatments can be spruced up with the addition of tiebacks and tassels. So, don’t be scared to use them as a means of accessorizing.


  1. Consider your window treatments before purchasing a curtain with a print if you’d want to use one. For the best window treatments, use a single-colored blind and a patterned curtain. When it comes to patterns, don’t go crazy with them.
  2. Don’t use the same curtains all throughout the house for the sake of a beautiful home design. From a design perspective, this is the case. Try out a variety of curtain styles to see what works best in each space. You’ll be able to brighten up the atmosphere in your home this way.
  3. Using a bar that is too narrow can result in your curtains not covering your windows.
  4. Outside of the window frame, do not hang shades. It’ll look odd in your house.

How to hang curtains over blinds, whether it’s for privacy or for the wonderful shades of sunshine seeping through the sliding doors, is now at your fingertips. However, I believe you’ll appreciate some ideas for coordinating your room’s drapes and blinds. Who wouldn’t want that?