To make curtains more attractive, swags can be added. They are drapery materials that are slumped between the pleats of the curtain for a decorative effect.
People who I taught how to make curtain swags a long time ago are returning to learn more. A lot more is going on here. There is a price difference between swagged and plain curtains.
Because it’s so pricey, many individuals opt to buy the raw materials and make their own instead of buying pre-made ones from the store. That’s why I’m here, to show you the ropes on how to do it.
Curtain swags are made in a specific way, and we provide a wide variety of curtain swags to choose from. There are a wide range of possibilities, including the following:
- swags for the pole
- victories for murphy and victory
- the crest of the escarpment at Kingston
- a simple way to swag a pole
- a vast and complex system
- basic swag with pleats, amongst others
There are few supplies required for you to hang your swags on drapes;
- Draping cloth
- a measuring stick
- machine for sewing
- thread and needle
- pins and an ironing board
Things You’ll Need
- The aforementioned tape measure
- Spools of thread and needles.
When used in conjunction with existing curtain panels, such as panels from the same fabric, or when used on its own, a swag valance provides a finished but open appearance to a window. As long as you can sew a straight line and don’t need any pockets or tabs, you may easily build your own swag valance window treatments at home! Those who have never done anything like this before won’t be scared by it.
Step 1: Decide on the Size of Your Swag Valance
Decide on the depth and length of the swag valance you want to hang over the window (only in the event of a valance that is not going over the top of an existing set of panels). It’s recommended that your valance is at least a quarter the window’s height in length, if not more.
Step 2: Measure the Curtain Rod
You’ll need to know the length of your curtain rod as well as how far you want the swag valance to extend down one side of the window. When selecting a material, double this measurement in length.
Step 3: Calculate the Material Width
Measure from the top of the curtain rod to the bottom of the window where you want the swag valance to hang to get the material’s width. For hemming and draping, add six inches to this size.
Step 4: Choose the Fabric
Silk, fake silk, or soft velvet are all good options for drapey fabrics. To make hemming easier and smoother, use a material that does not fray quickly. Check the raw edge of your cloth to determine if it unravels readily before purchasing it.
Step 5: Cut the Material
The material should be cut to the desired lengths and widths. Test the breadth and length of the valance before hemming it by draping it over the curtain rod. Allow yourself some wiggle room when it comes to making adjustments.
Step 6: Fold and Sew
To aid in the fabric’s ability to lay flat, iron the material’s edges inward by 1/4 inch. All the way around, sew a straight seam 1/8 inch from the edge. Fold the edges in a further half-inch and iron. All around the piece, sew a straight seam 1/4 inch from the fabric’s edge. Remove any dangling threads with a pair of scissors.
Step 7: Drape the Swag Valance
Make sure to secure the valance to the curtain rod by draping it over its top and tucking the ends behind it to keep it in place. Adjust the vertical length of the valance’s front. In order to hide the ends of the swag valance, make sure they are tucked beneath the curtain panels. Drape the sides of the swag valance with ornamental fabric.
Always add more material to your measurements if you aren’t entirely sure about the length and width. The cost for the extra material will ultimately matter less than the frustration of coming up shorter than you expected and you may find you like it better longer than you thought you would when you envisioned it. You can always cut it back but you can’t make it longer.
If you’re unsure about the length and width of your project, always add more material to your dimensions. The cost of the additional material will ultimately be less important than the disappointment of coming up short, and you may find that you enjoy it longer than you imagined. Cut it back, but don’t try to make it much longer!
Why are Swags Made for Curtains?
If you’re unsure about the length and width of your project, always add more material to your dimensions. The cost of the additional material will ultimately be less important than the disappointment of coming up short, and you may even find that you enjoy it more than you expected when you first envisioned it. Cut it back, but you can’t lengthen it.
I once had a fashion-obsessed friend. A few weeks later, I had constructed my first curtain swag thanks to his instruction. Since then, I’ve become completely enamored with the entire procedure. You should join the league so that you can enhance the aesthetics of your living space. Your enthusiasm is all that is required to make this project a success.
What is the Cost of Making Swags for Curtains?
Because swags are so pricey, you should be able to afford $100 worth of supplies. Buying curtain cloth at a secondhand store can cost you as little as $50. As a result, for $150 and three hours of your time, you should be able to furnish your living room with some lovely swag.
Well, the procedure of making swags for curtains is a unique one. Before you begin the process, make sure you have all of the necessary supplies.
Swags for curtains can be made for a low price, but the typical person may not be able to buy it.
Curtain swags are a wonderful way to add a dash of elegance to your bedroom and living area. The materials used to produce swags for curtains aren’t sourced from the moon. With patience and persistence, you can do anything.
Decide on a specific type of swag and devote time to developing it. You won’t be disappointed if you follow the methods above, and you won’t ask for additional flavor.