Updated at: 22-09-2022 - By: Sienna Lewis

These handy hints will show you the ins and outs of hanging curtains. Plus, we’ll provide you links to the best hardware and draperies for your price range!

When it comes to draperies, I’ve had the most queries. What’s the matter at hand, then? Here’s a step-by-step guide on hanging curtains.

What a surprise! If you think it’s a simple, no-brainer task, think again. Hanging curtains, on the other hand, can go horribly wrong in a hurry.

I’m here to show you exactly how to hang curtains, and I hope I’ve been helpful. You should read this before placing your curtain order because the length, style, and material of your curtains are almost as important to consider as the way you hang them.

Installation is just as vital as the drapes’ materials, size, and style. Hanging curtains is just one part of the process; the rest is up to you. Hanging them is just as crucial as the rest of the considerations, such as style, shape, and size.

Above is a snapshot from a friend’s house where she and I utilized Amazon pleated curtains to spice up her windows and start the conversation! Please click here for a direct link to the exact curtains. I think adding a few more panels to the window treatment would make it even better!

How to hang curtains in three simple steps!


  • Hardware for Drapery
  • Panels of Curtains


  • Drill
  • Bits of Drilling Material
  • Laser Level (the greatest) or Level (the worst)
  • Pencil
  • Tape Measure
  • Ladder
  • A wall anchor


  • The rod’s length should reach 8-12 inches beyond the window’s frame. A 9-foot-wide window need a rod that is 11 feet long. Your window’s total size and space constraints will dictate how much you can adjust this. adding or subtracting in order to maintain the correct proportions The rod will be 8-12 inches above the window frame (size allowed), therefore the length of the curtains should reflect that as well as any additional length needed for pooling. Either pleat will need its own set of rings, so be sure to order an extra set at each end of the panel as well. Pleated drapes necessitate the use of drapery hooks. Before purchasing custom drapes, be sure to check the hardware included.
  • Measure twice, drill once while installing hardware. Measure, and then measure again. Preparation is better than having to mend a hole that was drilled wrongly. Place one of your brackets 8-12 inches above the window frame and 8-12 inches outside the window frame; this should reflect the whole length you ordered. This is also where you’ll put wall anchors if they’re needed. Mark these locations with a pencil. A second side and a central brace should be installed in the same manner (the central bracket should be 8-12 inches above the window frame). Consistency is key when it comes to bracket placement; for example, all three brackets should be 9 inches or 11 inches above the window frame, respectively. Use a level to make sure the rod is absolutely level while an assistant holds the hardware in place. Install wall anchors if necessary, and then screw each bracket into place with its own set of screws.
  • Slide the curtain rod into the brackets and attach the rings to the rod to hang the curtains (if using). Using drapery hooks, fasten the curtain to each pleat and the curtain’s end (if needed). If you’re using pocket-style curtains, just slide them onto the rod or attach them to the rings (pleated style curtains).


Use curtain rings to keep the curtains from drooping by placing one ring on the outside of each bracket.

How to Correctly Hang a Drape at Home | Pottery Barn - YouTube

This video from Everhem shows you step-by-step how to hang your new curtains. Their handmade drapery comes complete with all of the necessary hardware. A fantastic business, which I heartily endorse!

How high to hang curtains?

Curtains can be hung at a variety of heights. Whenever possible, I prefer to hang my drapes 8-12 inches above the window frame. This will create the impression of a higher ceiling and a larger window, making the room appear larger.

How wide should curtains be?

Curtains should be at least as wide as the window they are meant to cover when closed as a minimum.

Make sure your window coverings have enough “stack width” in order to achieve an elevated impression. Installing the hardware around 8 inches beyond the window frame will allow you to emphasize rather than hide the window.

The curtains are meant to cover the windows when they are closed, but they shouldn’t block the view when they are open. Instead, the window should be framed and made taller and wider on both sides.

You may be constrained by space; if this is the case, go as wide as you can while still considering scale.

How long should curtains be?

Depending on the room, curtains can come in a wide range of lengths. Determine the style you’re going for before deciding how long your hair should be. How much do you want them to splatter?

Puddle curtains require an additional 4 to 6 inches of length above and beyond the curtain rod’s standard length. Purchase drapes that are 100′′-102′′ long if the curtain rod is 96′′ long.

Determine where the curtain rod will be installed, and then calculate the length to the floor to achieve the “just kissing the ground” aesthetic. For this reason, before installing the hardware, I like to slide the curtains on, then raise the rod and drapes to mark the exact spot where the hardware will go.

How to hang pencil pleat curtains?

Pencil pleat curtains can be hung in the same way as pocket style curtains, but to ensure that the rings and drapery are placed precisely, have someone hold the curtain rod up into place with the rings and drapery attached.

For the most part, you want your drapes to just touch the floor (approximately 1/4 inch above the floor). It’s impossible to get a precise number without actually securing the drapes. You may get a little different length even though you’ve ordered the exact length you want. Before drilling into your walls, be sure you know what you’re doing.

When using pencil pleat curtains, the drapery hooks can be fine-tuned to get the height just right.

How to make curtains look good?

It’s a simple question, but if you’re not making your own curtains, it’s a little more difficult. Even if you order custom curtains, the quality of the fabric and the workmanship are important considerations.

A lovely and sumptuous kind of drapery is pleated, but it is not cheap. Below, I’ve included a few low-cost possibilities. Ikea’s curtain panels come with a pleating strip so you can simply make pleated curtains at home for a fraction of the cost.

Also, make sure that they are installed at the correct height, width, and length.

Steam the curtains before you hang them up. Why? Once relaxed with steam, they may become too long if you install them before they’ve had time to expand! If you want your garments to appear their best, steaming or ironing them is a must!

If you want the drapes to appear luxurious, request extra panels or extra broad!

Hanging Curtains with Rings

There are two ways to get the effect of ringed curtains in your home! A single hook for hanging drapes. The other has a ring clip attached to it.

As a small metal pin is inserted into each panel of drapery, it serves as a hook for the curtain rings to glide into. Hardware stores and online retailers carry these. To hang curtains using rings, they’re my preferred method of choice.

Curtain rings can be hung in a variety of ways, including using ring clips. They’re curtain rings that already have clips attached to them. Curtain panels are fastened together with these tiny clips. Relaxed looks can be achieved with this. In my opinion, they look a little less than polished.

How to Hang Curtains On Rings (With Perfect Results!) - The Homes I Have Made

Oddly Shaped Windows

Bay windows

With adjustable curtain rods or shades, bay windows can be approached in two ways:

Adding adjustable arms to your curtain rods is simple if space is available above the window frames.

As an alternative to curtains, use shades when there is no place for a curtain rod to be hung above the window frames. Bay windows look amazing with linen roman blinds!

Arched windows

For arched windows, you’ll need to hang the curtain rod 8 to 12 inches above the arch’s top and treat the window as if it were rectangular.

A rod 8′′-12′′ above the tallest arch should be used if you have multiple arched windows of varying heights.

Curtain Hanging Mistakes to Avoid

Curtains too short.

Puddling curtains are preferable to curtains that are too short for my windows. As far as curtains go, I prefer them to be around 1/8′′ above the floor. However, puddling curtains are opulent and beautiful!

I can’t help but think about all the cleaning that will have to be done.

Rod not wide enough.

There are countless examples of this in my day-to-day life. Where the curtain rod is exactly the same length as the window frame. Ideally, your curtain rod should protrude on either side of the window frame by 8-12 inches.

If your window is 6 feet wide, the curtain rod should be 8 feet wide.

Recall that curtains are supposed to enhance and frame the window, while also providing light filtering and blocking.

Rod hung too low.

A curtain rod that isn’t wide enough is usually set at the wrong height. If the ceiling or crown molding stops you from going higher than 8′′-12′′ over the top of the window frame, then just go as high as you can.

Fabric not full enough.

When it comes to draperies, designers use terms like “fullness” and “stack breadth.”

You need twice as much fabric as curtain rod length for standard fullness, which is 200 percent. To give the draperies a more luxurious appearance, extra fabric is pleated in a beautiful manner. Intricate details of fullness in the drapes.

We also take into account the stack width, which is the additional width of a window treatment that allows the drapes to be installed slightly outside of the window frame and not cover the window while they are open.

If the curtains are to be used to close an opening, they must be at least as broad as the opening itself.

Where to Buy Curtains

The price of curtains can range from $50 to $5,000, no exaggeration!

It all comes down to personal preference, style, and materials.

Is anyone ever going to spend so much money on drapery? Although bespoke drapery is pricey, it’s worth it. Custom draperies is a labor-intensive process that necessitates the use of real human hands. In addition, linen fabric isn’t cheap. Adding up at $50/yard or more quickly.

The following are your most expensive to least expensive options if you want something truly unique:

  • Using a local work space gives you more control over the final product.
  • You can’t go wrong with Shade Store’s products!
  • High-quality linen from RH Custom.
  • Everhem is a great option because it comes with everything you need, including hardware and instructions!
  • Alva is a top-notch product at a fantastic value.
  • Custom drapery from Blinds Com is the most affordable choice available.

If you’re looking for a bespoke look without the custom fee, here are some options:

  • A triple pleat and 100 percent linen make these Amazon 100 percent Linen extra narrow, but they’re worth it.
  • A less expensive alternative is the Amazon Linen Blend. A double pleat distinguishes them from being made entirely of linen.
  • If you want to do it yourself, Ikea (the greatest value) has a pleating strip attached to the back. You may learn how to do it yourself at the blog of my friend Grit & Polish.
  • These products from Bed Bath & Beyond appear to be really promising!

Where to Buy Curtain Hardware

Everhem, as I indicated before, includes hardware, and I believe the pricing is really reasonable given the high level of quality, customisation, and hardware included. For those who prefer ikea or amazon, here are some beautiful hardware options from Pottery Barn, West Elm, and CB2 (my personal favorite! ), all of which are available at varying pricing points.

Is there a way to open and close drapes without them dangling from the rods? That’s where a drapery wand comes in!

3 Different Types of Curtain Fabrics

To begin, let’s discuss the many curtain fabric options available.

Listed here are some of the most popular curtain fabrics on the market:

Type #1. Silk

Silk’s visual appeal is overshadowed by its practicality, hence it is often associated with the word “luxury.”

Silk, unlike the other textiles, is susceptible to sun damage and may only be dry-cleaned.

As a result of its weight, silk drapes gracefully.

In your bedroom or dining room, you’ll be sure to feel the love.

Type #2. Cotton

Cotton is an excellent choice for curtains since it is so versatile.

By doing so, you will be able to create a wider variety of looks.

It’s versatile enough to work with both contemporary and traditional decor.

Because of its light weight, a cotton curtain does not require a perfect lining to hang properly.

Type #3. Polyester

Polyester is a widely accessible fabric option.

It is regarded to be less expensive, more resilient, easier to handle, and less likely to stretch and wrinkle after washing.

In bedrooms and living spaces, polyester is chosen.

However, because it is combustible and restricts airflow, this sort of cloth should be avoided in the kitchen.

Steps To Hang Curtains With Rings And Hooks

Curtains are often seen as the final piece of dcor in a home.

For a room’s aura and atmosphere to alter, the appropriate combination of pattern, color, texture, and design is necessary.

Surprisingly, the way you hang your curtains has an impact on the mood of others who are in close proximity to it.

Rings and hooks are two of the most common ways to hang curtains.

Using rings that slide over the curtain rod, the hooks are attached to the upper end of a curtain panel with clips.

It’s possible to hang any kind of curtain using this approach, allowing for a lot of flexibility.


Let’s see how to use rings and hooks to hang curtains now, shall we?

Step #1. Choose your preferred curtain to use

You need to think about what style of curtain you find most comfortable and enjoyable to use when selecting a curtain.

Measure your window’s length and width to determine how wide and long your curtain should be.

Step #2. Curtain hooks and rings

If you’re not familiar, a curtain hook is a device used to hang curtains. It is a small piece of metal that can be attached to the eyelets of the curtain rings.

The hook’s sharp end must be inserted into the curtain’s header.

The unpolished downward-pointing end passes through the rings.

Step #3. Layout the curtain panels

Install the curtain hook and arrange the curtain panels as desired. Thread the hooks into the eyelets of your curtain rings and make sure they are in the correct position.

Curtain rings can be found in a wide variety of styles and materials. The regular curtain rings or the wooden curtain rings can be used.

As soon as the header and rings are joined, your curtains are finished.

Step #4. Add curtain weights

This is an optional step, but it will give your sheer curtains some character.

Make sure your curtains are straight by adding weight to them in order to prevent them from wobbling and flying all over the place because of their weight.

It’s an easy process.

To repair a one-inch section of the hem, you will just need to rip a handful of stitches.

The curtain weight should then be inserted. Doing this on both sides of the curtain panel will assist.

Is it something you enjoy doing? Click here. It may pique your curiosity.

That’s all.

Final Words

I hope this article has answered all of your questions about how to hang curtains with rings and hooks.

You may certainly accomplish it, but remember that the correct fabric for your home is essential.

Everything must be to your liking, so keep that in mind.

Make sure you know that your effort in reading this far is greatly appreciated.

Enjoy your day to the fullest!