Some individuals don’t use curtains over blinds since they look like curtains the way they are manufactured. Blinds are a way to keep others from seeing you. The term “blinds” can refer to both horizontal and vertical blinds.
Plan and carry out the process of installing curtains over blinds with ease. It is common for people to put drapes over their blinds in order to give their rooms a more luxurious feel. They hang curtains over their blinds to shield themselves from the sun’s rays, as well as to ensure total seclusion.
In a sitting room with curtains, the blinds are covered, however in a room without curtains, the blinds are left open.
Curtains over blinds require the following supplies to be installed:
- a measuring stick
- a piece of
Steps on How to Install Curtains over Blinds
Step #1: Determine the Dimensions of the Blinds
Take accurate measurements before beginning any work to guarantee you’re working with up-to-date information. Take a measurement of the blinds’ length and make a note of it. Make a note of the blinds’ width as well.
From top to bottom, measure the length of the blind. You do this while installing the curtains over the blinds in order to get an idea of how long they should be.
Proceed to the next stage once you’ve collected all of your data.
Step #2: Get the Curtains Ready
Several styles of curtains are commonly used to cover the blinds in the room. When it comes to the curtains you choose. Measure the length and width of the blinds using the data you acquired from the blinds.
Curtains are selected according to where you live. Some people buy thick curtains to keep outside noise from bothering them.
People buy curtains that shield them from the sun’s rays, while others opt for ones that let in fresh air.
Step #3: Make a Rough Sketch of How you Want the Curtains Over the Blinds
It’s a snap to figure out how to put up curtains over blinds. This step is not required. Make a rough drawing of how you envision your drapes and blinds blending together.
This diagram will give you a general idea of how the installation should proceed. But it’s a crucial stage, and it’s frustrating that people are impatient to get to the end and enjoy the final result.
Step #4: Gather all the Materials and Begin
You’ve got everything saved. The time has come to get down to business. Curtains, pins, and a ladder are all you’ll need for support, as well as scissors if necessary. Then, take a look at your sketches once more before placing the ladder to the blind and continuing with the next step.
Step #5: Install the Curtains
You’ll need someone to hold the curtains for you as you ascend the ladder if you have all the materials. You can pass the drapes behind bars from either the left or right side of the room.
Installing some to conceal all of the blinds while also doubling the size of others is a good idea. Left and right come at you in opposite directions. Take a moment to admire your work from a distance and search for any faults.
Step #6: Make Adjustments
You’ve put up the curtains, but there are still a few things you’d like to tweak. At this point, you should double-check the installation, settings, and measurements to make sure they are accurate. As a result, you’ll be able to sit back and relax in your living room or bedroom, respectively.
Why do People Install Curtains Over Blinds?
You can see from the instructions above that installing curtains over blinds is a simple task.
Curtains can be found at any food store, and following these simple instructions can give your living room a stunning new look.
After a hard day at work, many people choose to unwind in the quiet and tranquility provided by these curtains over blinds. You need to understand how to put curtains over blinds and make one for your home if you want to be able to relax with your loved ones without being disturbed by nearby noise or passing traffic.
What is the Cost of Production?
Anyone can learn how to put up curtains over blinds if they want to. Be confident that these curtains can be installed for $30 and a few minutes of your time.
Even if you don’t have time during the week, weekends are a great opportunity for those who do to go shopping at their favorite retailers.
Some people even borrow equipment to get these curtains installed ahead of time for the summer or winter, when they will be very useful.
How to Hang Curtains over Blinds without using Nails and Drills
Three simple no-drill methods for hanging drapes over blinds are presented here. And the first is our favorite. You’ll find out why if you keep reading.
- Using braces for the window (perfect for vertical blinds)
- Making use of command-line hooks (best for Venetian blinds)
Using Window Brackets (perfect for vertical blinds)
You’ll need these things:
- Hardware for mounting curtain rods.
- Towel ring
- Fabric for curtains, of course!
Let’s go to work, homeowners and renters, and put this hardware on our blinds as soon as possible!
Step 1: Install your brackets on your headrail
To begin, what exactly is a “headrail?” The mechanism of your blind is operated from the top rail, which is called a headrail. Your Venetian blinds (horizontal) or vertical blinds (vertical) can be shifted left and right thanks to the mechanism.
NoNo brackets from Amazon are a great option because they’re simple to install and don’t require a hole in your wall. Your brackets should now be placed at both ends of the headrail bar. After that, make any necessary adjustments to ensure that everything is snug, firm, and secure.
Get your NoNo brackets from this page.
Step 2: Install your curtain rod on your brackets for easy mobility
Your bar will go up after you’ve finished assembling your brackets.
Once the drapes are attached to the curtain rod, you may then attach the brackets to the curtain rod. Next, secure one bracket to the rod with a screw until it is firm and stable. You don’t need a screwdriver to install the NoNo brackets.
Between 5 and 10 minutes are needed to finish this curtain installation method.
We prefer curtain rods to tension rods for this reason:
- Taking your curtains down from your tension rods might be a real pain.
- Lightweight curtains can only be supported by tension rods, which are not suitable for large windows. In contrast, curtain rods are more suited to smaller windows. For those of us who still have vertical blinds, this is a great point. In addition, regardless of how heavy your drapes are, it will be able to transport them.
Amazon has curtain rods for sale.
What you’ll Need in the Way of Hardware
- It’s Velcro that goes all the way around the cornice.
- Toweling material
Velcro may be used to hang curtains over blinds in your room without drilling.
One side of the Velcro will be attached to the inside of the cornice or the headrail bar here (if yours has got space for it). Attach the curtains to one side and they’ll fit perfectly.
Velcro with a 12 inch wide strip works best for light-weight curtain materials, like silk. In addition, use a broader Velcro for heavier curtain materials.
If you want to use blackout curtains in your room, house, or office, but you also want a certain level of darkness and/or seclusion, this is the way to go.
You can’t move your draperies around if you use this method of hanging them because they’ll be fixed in place.
Using Command Hooks
To get started, you’ll need some supplies.
- Brushed nickel large command strip hooks (matches most wall and ceiling colors) — carry up to five pounds of weight. On Amazon, you may purchase it.
- Picture hanging strips with a weight capacity of 12 lbs. are available from Command. You can get it right here.
- It is not possible to use a 1-inch bar in your command hook since it is too short.
The show must go on!
Make a right-angle bend in the middle of your picture-hanging strip. Then, from left to right, bend the Velcro so that it adheres to the other Velcro.
A command hook can be attached to the back by removing one side of the strip’s lid. Then, hold it there for a few seconds to make sure it’s firmly in place.
Remove the picture-hanging strip’s cover to expose its adhesive side. Put the hook in its proper location on the wall. For around 10 seconds, hold it firmly against the wall. Lift your command hook off of the strip at this point.. Make no mistake: Your strip is still firmly attached to the wall.
Place the hook back on top of the command strip and press or push it hard against the wall for around 30 seconds.
It’s time to do the same thing for the other hook on the opposite side of the wall. Afterwards, allow the hook to dry for three hours before using it.
Finally, it’s time to hang your curtains. However, before you can hang it from your hook, you must first hang the curtains from your bar.
Due to the fact that command hooks and picture hanging strips can only go so far, you’ll need to utilize sheer curtains.
It’s clear that putting up curtains doesn’t necessitate the services of a handyman or the drilling of holes in your walls.
Measure your windows carefully before you begin to hang drapes on brackets.
Window treatments and the look of your home could be ruined if you make a mistake here. You don’t want that. As a result, let’s get going.
This is what you’re going to need
- Using a caliper
- What’s this?
So, here are the five steps you need to follow in order to get accurate measurements for your curtains:
- The first step is to choose an installation strategy. The brackets approach is a great option because it’s quick and straightforward to put together. Curtains that extend beyond the window frame are a good choice when using brackets.
- You should measure the width of the window up to the area where you’d like the curtains to fall. Tape your tape measure to the outside of the window frame at both horizontal ends. At the place where your curtains begin and end, you should begin and end your measurements.
- Measure the distance from the floor to the top of the curtain rod. You should measure from the top of your blinds to the floor if you plan to use Velcro or window brackets to attach your shades. For command hooks, measure from the ceiling and the floor to get the best results.
- After completing steps 2 and 3, you have your lowest and maximum measurements. Since it may be difficult to find curtains that meet your exact measurements, you might proceed to buy curtains that are somewhere in the middle.
In addition, here are a few tips to ensure that your curtains over blinds don’t look shabby. Instead, create the ideal ambiance in your house or apartment.
- Pick your blinds first if you’re thinking of having new curtains and also turning your vertical blinds to horizontal. Blinds such as roller or Venetian blinds are more likely to match drapes than other types of shades. If you choose for wood blinds, you’ll want to pair them with draperies in warm tones. Try to choose drapes with complementing colors and a little bit of dark hues if your home includes chilly colors.
- If you’ve got a limited space, it’s best to keep your window treatments close to the ceiling. Allow the curtains to stretch at least 30 to 60 centimeters beyond the window pane. You’ll be able to give the impression that your windows are larger and your ceiling is higher this way.
- Use enough fabric to cover the breadth of your window when hanging curtains over blinds. That’s the case if you’re going to be closing them frequently.
- Your guests will fall in love with your home if you pair your curtains and blinds in the right way. Blinds and curtains are a must-have if you have large glass windows in your kitchen or any other area. To let in natural light, you might roll up the blinds throughout the daytime. Make your home look new without sacrificing your privacy or interior style by using this trick! Roman blinds, which are great for creating a comfortable atmosphere, can be paired with blackout curtains to accomplish this effect.
- The drapes and blinds should match the color of the rod. The use of a rod with a bright color, such as gold, is strictly prohibited. Instead, choose matte-finished hardware to go with your window treatment.
- Window treatments can be spruced up with the addition of tiebacks and tassels. As a result, don’t be scared to wear these as accessories.
- In order to avoid having your blinds match your drapery, make sure your blinds are plain. For the best window treatments, use a single-colored blind and a patterned curtain. When it comes to patterns, you don’t want to go over the top.
- Avoid using the same curtains all around the house for the sake of a beautiful home design. From a design perspective, this is the case. Try out a variety of window treatments in various locations throughout your home. Color and shine can be added to your room this way.
- Using a bar that is too narrow can result in your curtains not covering your windows.
- Outside of the window frame, do not hang shades. It’ll look odd in your house.
It doesn’t matter if you value your own space or if you enjoy the way light filters in through your sliding glass doors now that you know how to put up drapes over blinds. In addition to this, I think you’ll find a few design ideas for combining your curtains and blinds in your space interesting. I mean, who wouldn’t want that?
How to Hang Curtains Over Blinds
While blinds are great for keeping your home private, they aren’t usually visually appealing. Curtains, on the other hand, are a great way to add elegance and warmth to your home. For renters, one or the other is frequently the only option for window treatments, and both have their advantages and disadvantages. Whatever your situation, you don’t have to settle for one over the other when it comes to window treatments.
Hanging drapes over blinds gives you the best of both worlds. You may quickly cover your blinds, including vertical blinds, without drilling into the wall with the use of window brackets or command hooks. There is no need for tension rods here, as tension rods are almost always incompatible with blinds.
Before You Begin
Before hanging curtains, measure the length and width of your window. How much fabric or curtain length you need will be determined by the length and the width of the curtain rod. A common rule is to get a curtain rod that is a few inches longer than the width of your window to ensure that it is stable when it is hung.
Hanging a curtain rod above your window and draping lengthy drapes will make your room appear larger.
What You’ll Need
Equipment / Tools
- Curtains made of fabric
- Towel ring
- Adhesive hooks or two curtain rod brackets (aka Command hooks)
- Screws, two (for brackets)
- Screwdriver, 1
- a tape measure, one
Install Brackets or Adhesive Hooks
Installing curtain brackets on your headrail is a better option than drilling holes in your walls. The horizontal bar at the top of your blinds is known as the headrail. If you can, buy goods that are specifically designed for use on headrails. You won’t have to drill holes in your wall if you attach the brackets directly to the headrail. Most curtain brackets come with the screws you need to attach them to the headrail of your curtain track. ‘ If not, a trip to your local hardware store should enough to obtain some simple screws.
The simplest technique to hang curtains over vertical blinds is to attach curtain brackets to the headrail of the blind. On the other hand, if you install sticky hooks on the wall on either side of your window, Venetian blinds may seem more appealing. A minimum weight capacity of five pounds is required for hooks if that is your preferred method. Depending on the weight of your curtain rod, you may want more adhesive hooks than just two. To keep the rod in place, insert a third above the window’s center.
Hanging curtains over blinds with a tension rod will interfere with the blinds’ ability to open and close, so don’t do that. Tension rods, on the other hand, aren’t capable of supporting much weight, therefore you can only use light curtains on them. For a no-drill solution, brackets or command hooks are the best option.
Put Fabric Curtains on Curtain Rod
Pre-made curtains are an option, but if you’re handy with a sewing machine, you can also make your own. To use a curtain rod, you’ll need a pocket along the entire length of your curtains. The first step is to ensure that your curtains can close all the way across your rod and all of your windows by pulling them tight on the rod.
Place Curtain Rod on Brackets or Hooks
Place a bracket on either end of your curtain rod and hang it. You should ensure that the curtain rod is level on your wall or window and that the weight of the curtain is even. It’s a good idea to open and close your curtains and blinds to make sure everything is working properly.
You can limit the amount of light in your room by using a combination of blinds and curtains. It’s possible to open both windows during the day, but close them when you need some shuteye.
Curtains and blinds can be used together to enhance seclusion. When left to their own devices, curtains can be readily opened by accident, allowing passersby to see inside. Blinds and curtains ensure that no one will be able to peek in. This frees your mind from the distractions of the outside world, allowing you to concentrate on the task at hand.
Curtains, on the other hand, are aesthetically pleasing. You’ll get privacy, light control, and aesthetic appeal with blinds and drapes that you may personalize to your liking.
Installing drapes over blinds is a must for anyone who lives in a noisy neighborhood or even just in the winter. During the winter, it keeps the room from becoming too chilly, and in the summer, it keeps the sitting area from being too hot.
Because you already know how to do it, learning how to hang curtains over blinds shouldn’t be a hassle. If you follow the directions and use the supplies provided, you’ll be sure to have an excellent result.