Updated at: 06-06-2022 - By: Sienna Lewis

Decorate your event or party with balloon curtains, and it will feel more like a celebration. However, they can be difficult to correctly hang with the included hardware. Using the correct equipment and materials, you’ll learn how to hang balloon curtains for the ultimate effect at your event!

Steps on Hanging Balloon Curtains

A balloon curtain is a banner that hangs in front of your event and is a great way to draw attention to it. Frames are typically composed of metal or PVC tubing, and the material can range from plastic to paper. Choosing the right size and material for your curtains is the first step in any window treatment project.

6 Easy and Simple DIY on How to Hang Balloon Curtains - Krostrade

Sauteing for material is the next phase in the process of hanging balloon curtains. Bungee cords and powerful paper clips that can hold up to 50 pounds are a few examples of these things. In order to avoid balloon gaps, you’ll also need some string.

Adding air to the balloon is the final stage in the process of making and installing your own DIY balloon curtains. All of your balloons must be inflated and attached before they can be used.

Step #4: Place the balloon curtain frame on a table or in front of the area where you want it to be hung once you’ve completed Step 3. After that, you may start hanging paper clips in a S form from the top of the frame by clipping them to ropes. Clip the balloons to the paper clips one at a time.

How to Hang Balloon Curtains: Step #5: The final step is to use your string in between the balloons to keep them secure.

A clothesline or curtain rod at eye level is a good place to hang them, then add some weight on one end of the strings with some little bungee cords.

Step #6: Hanging the balloon curtains is completed with the final step. The other end of each thread should be tied to a chair or other strong item. After that, let go of the bungee cords to eliminate any remaining tension between the balloons. Finally, you can hang your curtains!

Note: The more paper clips you use, the higher your balloon curtain frame will be off the ground. As a result, every string should have some weight on it to prevent sagging and making a room look sloppy when it is strung high enough.

What are Balloon Curtains?

It’s easy to jazz up a room with balloon curtains, which come in a variety of colors. For a DIY balloon curtain, add weight, tie threads high enough to keep balloons from sagging, and then tape paper clips vertically on either side of each string every few inches to hang the balloons from with rubber bands.

How many Balloons do I Need to Make Balloon Curtains?

First and foremost, how to hang balloon curtains is a common question. The DIY balloon curtain frame can be decorated with as many balloons as you like.

Custom Made Faux Silk Balloon Shade by Drea' Custom Designs | CustomMade.com

Make a huge curtain using up to 50-60 balloons, or add a few colors by mixing at least another 20 for a total of roughly 40. You’ll need two ropes per string (or three strings per rope) to hang the balloons. 20 paper clips are required for each string.

Step-by-step Instructions on how to Make Your DIY Balloon Curtains:

You’ll need the following:

  • Balloons in a variety of colors (depending on the room they’re going in) should fill about 40 or so balloons.
  • Ivory thread (or another color if you prefer)
  • tacks of all kinds
  • Use a tape measure or ruler to figure out how many threads you’ll need for your window’s dimensions.

The first step is to measure your window’s height and width. If you’re using a single rope, make it at least one and a half times as broad as your window and four times as long as that. If you’re going to use two ropes, make them roughly eight times as long and three times as wide as you would if you were only using one.

By multiplying the height by the width of the window, you can determine how many strings you need to cover it.

Using a single-stranded string, cut two pieces the same length as your height x breadth (in feet).

A paper clip and a tape measure can be used to secure a piece of thread. Make a loop above your head, then climb up to the window frame and go around the top of it. Do not over-tension the strings by pulling too hard on either end.

Once you’ve attached one end of your string to another loop, repeat the process. Tape it again in a large X shape. Repeat on each of the four corners.

Measure where you want the strings to dangle from the top bar and turn the curtain so that it fits nicely over the window frame. Make a cut at this point and (if using double ropes)

A long string can be created by taping two separate pieces of thread together and leaving enough room on either end for tying off later. If you’re working with a piece of tape, be sure it doesn’t come loose or unravel while you’re using it.

You’ll need to multiply height times width to figure out how many clips are required in Step #4.

Measure each clip and tie it off in a square pattern with the string for stability (tip: use more clips if you want it to be secure).

Rope should be cut to the length needed to hang from the bottom of the curtain and folded over the top to make another curtain layer.

You will need to measure the length and height of the area where you want your curtains to hang, and then cut a square pattern out of the string that you will use (tip: make sure there is plenty on either side when tying off later).

Use clips and hooks to secure the bottom bar to the ceiling or wall at the correct location. By looping the string over the top bar and knotting it securely, you may attach the cut lengths of thread to the bar.

Hook the bottom bar of the curtains. Before you start blowing up the balloons, simply fluff or hang them up and then tie the ends with ribbon.

In the end, there are many ways to make your decorations more fun or festive. Hang balloon curtains to create a party atmosphere anywhere they’re hanging, not just on the windows and baseboards! I hope this essay has given you a new perspective on how to hang balloon curtains.

How to Hang a Balloon Curtain

Balloon curtains have a traditional beauty that never goes out of style, making them a great way to spice up your windows. Curtains with scalloped bottom edges allow light into a room because of the fabric’s fullness. When seclusion is desired, it can be readily altered. Outside the window casing, balloon curtains can be installed. In order to get the desired effect, you must make adjustments to the balloon curtain’s ballooning edges.

Balloon Shades Starting At: | Etsy Ireland

Make sure the back of the curtain is facing up by placing it face down on a flat surface.

Each curtain ring should have a split plastic ring in it; use these to attach the rings to the curtain.

Insert one of the split rings from the bottom row of the curtain into the ring above it. Keep adding split rings to the rings on the previous row. As you progress up the rings, one row at a time, you’ll be able to adjust the balloon curtain to the desired length.

Using a curtain rod bracket, hold it in place on the wall above or next to the window’s casement. Using a screwdriver, fasten the screws to the brackets into the holes in the wall. Ensure that the wall brackets on either side of the window are level before attaching the final piece of hardware.

Pass the curtain rod’s end through the rod pocket on the curtain’s top. Slide the curtain rod’s ends over the wall brackets to secure it in place.

The curtain should be hung such that it’s in the middle of the rod. Push out the fabric on the rear of the curtain to fluff the various areas of the curtain. Make adjustments and adjustments until you have the look you want.