Updated at: 03-08-2022 - By: Sienna Lewis

While blinds are an excellent technique to keep your property private, they aren’t always aesthetically attractive to look at. Curtains, on the other hand, offer plenty of style while making your home feel cozy and warm. For renters, one or the other is frequently the only option for window treatments, and both have their advantages and disadvantages. There is an alternative, however: You don’t have to pick between curtains and blinds, regardless of your situation.

While blinds are great for keeping your home private, they aren’t usually visually appealing. You may add style and warmth to your home at the same time by using curtains. Even though there are advantages and disadvantages to both types of window treatments, renters often have to choose between them. Curtains and blinds don’t have to be a choice for anyone, regardless of their circumstances.

Before You Begin

Before hanging curtains, measure the length and width of your window. To determine how long a curtain rod should be, multiply the width by the desired curtain length. To be on the safe side, get a curtain rod that is a few inches longer than the width of your window.

Pin page

Tip

Hanging a curtain rod above your window and draping lengthy drapes will make your room appear larger.

Drilling holes in your walls to hang curtains is a waste of time and money.

What You’ll Need

Equipment / Tools

Materials

  • Curtains made of fabric
  • Rod for the drapes
  • Adhesive hooks or curtain brackets (aka Command hooks)
  • a pair of fasteners (for brackets)

Materials

Equipment/Tools

  • A screwdriver is all you need.
  • Only a single caliper

Instructions

Install Brackets or Adhesive Hooks

Drilling curtain brackets into the wall or attaching them to the headrail of your curtain rod is up to you. The horizontal bar at the top of your blinds is known as the headrail. Headrail-specific products are available, so if you can, take advantage of them. Drilling holes in your wall to accommodate the brackets is unnecessary if they are mounted directly to the headrail. The screws you’ll need to attach the brackets to your headrail are included in the majority of curtain brackets. If not, a trip to your local hardware store should enough to get some simple screwdriver bits.

The simplest technique to hang curtains over vertical blinds is to attach curtain brackets to the headrail of your blinds. Installing adhesive hooks on the wall on either side of your window may improve the appearance of your Venetian blinds. Make sure the hooks you choose can hold at least five pounds if you decide to use them. Depending on the weight of your curtain rod, you may want more adhesive hooks than just two. To keep the rod in place, insert a third above the window’s center.

Curtains should not be hung over blinds using a tension rod, because the rod interferes with blinds’ operation. Tension rods, on the other hand, aren’t capable of supporting much weight, therefore you can only use light curtains on them. The best no-drill option is to use brackets or command hooks.

Put Fabric Curtains on Curtain Rod

Pre-made curtains are an option, but if you’re handy with a sewing machine, you can also make your own. To use a curtain rod, you’ll need a pocket along the entire length of your curtains. The first step is to make sure that your curtains can close all the way across the rod and the window before you begin.

Place Curtain Rod on Brackets or Hooks

To hang your curtain rod, place each end in a bracket and then hang it up. It’s important to make sure the curtain is balanced and the pole is level. Make sure your drapes and blinds are working properly by opening and closing them.

You may limit the amount of light in your room by using a combination of blinds and curtains. Both windows may be opened throughout the day to let in natural light, but closed at night if you need some shuteye.

Combined curtains and blinds also enhance your privacy. Curtains on their own can be easily opened inadvertently, allowing neighbors to glimpse inside. With blinds and curtains, you won’t have to worry about any privacy breaches. That allows you to focus on what you’re doing without worrying about what’s going on outside.

Curtains and blinds can be used together to enhance seclusion. Neighbors may be able to see inside your home if your curtains are left open by accident. Blinds and curtains will ensure that no one can see into your home. This frees your mind from the distractions of the outside world, allowing you to concentrate on the task at hand.

Using Window Brackets (perfect for vertical blinds)

you will require the following:

  1. Rod brackets for curtains
  2. Rod for the drapes
  3. There’s no doubt about it: Curtains.
  4. Screws

Let’s go to work, homeowners and renters, and put this hardware on our blinds as soon as possible!

Step 1: Install your brackets on your headrail

To begin, what is a “headrail”? Your blind’s headrail is where the mechanism is accessed. Your Venetian blinds (horizontal) or vertical blinds (vertical) can be shifted left and right thanks to the mechanism.

NoNo brackets on Amazon are straightforward to use and don’t require you to drill a hole in your wall, thus we recommend them. Your brackets should now be placed at both ends of the headrail bar. Make sure the settings are tight, strong, and secure afterward.

Get your brackets for the NoNo tournament here.

Step 2: Install your curtain rod on your brackets for easy mobility

It’s time to erect your bar after the brackets are in place.

But before you attach the curtain rod to the brackets, you’ll need to hang your drapes. Finally, screw the bracket on the rod until it feels solid and secure. Screwdrivers are not required to install the NoNo brackets because the screws are self-tapping.

This drapery installation method can take anywhere from 5 to 10 minutes to accomplish, depending on how quickly you work.

We prefer curtain rods to tension rods for this reason:

  • Curtains can be difficult to remove from tension rods.
  • If you have a huge window, you can’t use tension rods because they can only support light-weight curtains. In contrast, curtain rods are best suited to smaller windows. If you’re still using vertical blinds, then you’ve got a point. It’s also capable of transporting your curtains, no matter how heavy they are.

Amazon has the curtain rod you’re looking for.

How to hang curtains to conceal vertical blinds - Engineer Your Space

Using Velcro

What you’ll have to have

  1. Velcro that wraps all the way around your cornice for a secure fit.
  2. Fabric for the drapes

The Velcro method of putting drapes over blinds is another no-drill option.

One side of the Velcro will be attached to the inside of the cornice or the headrail bar here (if yours has got space for it). Then, join the curtains to the other side and it will fit perfectly.

Velcro 12 inch wide is ideal for light-weight curtain materials, such as silk. In addition, use a broader Velcro for heavier curtain materials.

If you want to use blackout curtains in your room, house, or office, but you also want a certain level of darkness and/or seclusion, this is the way to go.

You can’t move your draperies around if you use this method of hanging them because they’ll be fixed in place.

Using Command Hooks

This is what you’ll require:

  1. Brushed nickel large command strip hooks (matches most wall and ceiling colors) — hold up to five pounds of weight. It’s available on Amazon.
  2. Picture hanging strips with a weight capacity of 12 lbs. are available from Command. You can get it right here.
  3. If your command hook can’t accommodate a 1-inch bar, you’ll need a shorter curtain rod.

We’re ready to begin now.

In the first step, bend the picture hanging strip in half so that the top and bottom meet. The Velcro will stick to each other whether you bend to the left or right.

A command hook can be attached to the back by removing one side of the strip’s lid. Once you’ve got it in place, hold it there for a few seconds to make sure it’s secure.

Now that the image hanging strip’s sticky side is exposed, remove the lid. Hang the hook on the wall after that. For around 10 seconds, keep the hook firmly against the wall. Lift the command hook from the strip. Rest assured that your strip is still secured to the wall with a screw.

Once you’ve applied the command strip to the wall, place the hook on top of it for roughly 30 seconds.

Repeat this process with the second hook on the opposite side of the wall. Afterwards, let the hook sit on the wall for three hours to ensure it’s secure.

Putting up the curtains is the final step in this process. In order to hang the curtain, you’ll need need to hang the curtains on your bar first.

To avoid stretching the command hook and the picture-hanging strip, you’ll need sheer curtain panels.

It’s clear that putting up curtains doesn’t necessitate the services of a handyman or the drilling of holes in your walls.

However, you must first accurately measure your windows before attempting to hang curtains from brackets.

Window treatments and the look of your home could be ruined if you make a mistake here. And that’s the last thing you need. Let’s get started now.

Taking Measurements

This is what you’re going to need

  1. Using a caliper
  2. Pen
  3. What’s this?

In order to get accurate measurements for your curtains, these are the five procedures you should follow:

  1. The first step is to determine the method of installation. Installing brackets is a snap thanks to their simplicity and speed. A good suggestion if you are using brackets is to get drapes that are wider than the window frame.
  2. Determine how much space you want the curtains to enclose by measuring the width of the window from where the desired coverage will begin. Tape a measurement to the outside of your window frame, and then extend it beyond both of the horizontal ends of that measurement. At the place where your curtains begin and end, you should begin and end your measurements.
  3. Take a measurement of the height at which you want your drapes to hang. You should measure from the top of your blinds to the floor if you plan to use Velcro or window brackets to attach your shades. You should also measure higher, preferably from the ceiling to the floor if you’re planning to use command hooks.
  4. The lowest and maximum measurements from steps 2 and 3 are now in your possession. Since it may be difficult to find curtains that meet your exact measurements, you might proceed to buy curtains that are somewhere in the middle.

While you’re here, here are a few tips for keeping your drapes and blinds looking their best. Make your home or space seem its best instead;

DOs

  1. Pick your blinds first if you’re thinking about having new curtains and also changing your vertical blinds to horizontal ones Roller blinds and Venetian blinds tend to go better with curtains than other types of blinds. Now that you’ve decided on wood blinds, you’ll need curtains in warm colors. Try to choose drapes with complementing colors and a little bit of dark hues if your home includes chilly colors.
  2. Curtains and blinds should be hung at the ceiling in tiny rooms. Allow the curtains to hang about 30-60 cm beyond the window sills to complete the look. You’ll be able to give the impression that your windows are larger and your ceiling is higher this way.
  3. Do not use less than twice the width of your window when hanging drapes over blinds. You should do this if you plan to frequently close them.
  4. Your guests will fall in love with your home if you pair your curtains and blinds in the right way. Blinds and curtains are a great combination if your kitchen or any other area has large windows. When it’s daytime, you can pull up the blinds to let in more sunlight. Make your home look new without sacrificing your privacy or interior style by using this trick! Roman blinds, which are great for creating a comfortable atmosphere, can be paired with blackout curtains to accomplish this effect.
  5. The draperies and blinds should match the color of the rod. Gold or any other brightly colored rod should never be used. If you want to match your window treatment, choose hardware with a matte finish.
  6. Window treatments can be spruced up with the addition of tiebacks and tassels. As a result, don’t be scared to use them as an addition to your ensemble.

DON’Ts

  1. Consider your window treatments before purchasing a curtain with a print if you’d want to use one. For the best window treatments, use a single-colored blind and a patterned curtain. When it comes to patterns, don’t go crazy with them.
  2. For the sake of having aesthetic home decor, don’t use the same curtains around the house. This is from a design point of view. Experiment with different curtains for different rooms. Color and shine can be added to your room this way.
  3. For the sake of having aesthetic home decor, don’t use the same curtains around the house. This is from a design point of view. Experiment with different curtains for different rooms. Color and shine can be added to your room this way.
  4. Don’t use the same curtains all over the house for the sake of aesthetics. From a design perspective, this is the case. Experiment with different curtains for different rooms. You’ll be able to bring a lot more color and brilliance to your room by doing this.

Now that you know how to hang curtains over blinds, you can enjoy your privacy as well as the varying tones of sunlight streaming in through your sliding doors. However, I believe you’ll appreciate some ideas for coordinating your room’s drapes and blinds. Who wouldn’t want to do anything like this?

As a result, have a look at these 15 eye-catching ideas for window treatments.

Hanging Curtains Over Vertical Blinds | ThriftyFun

How to Hang Curtains Over Blinds the Easy Way

Kwik-Hang curtain rod brackets are the quickest and easiest way to hang curtains without drilling holes in the wall.

Kwik-Hang brackets allow you to hang drapes over window blinds in just three simple steps;

  1. Use a hammer to drive a Kwik-Hang curtain rod bracket into the window frame.
  2. Your curtain rod is now ready for use.
  3. In only a few minutes, you’ll have hung your curtains!

Pro-tip: Don’t mount blinds outside the window frame. If you layer curtains over blinds, optimizing your window’s real estate is imperative. Because of this, putting blinds outside of the window frame exposes unsightly mounting hardware and looks untidy.

  • Blinds with horizontal slats
  • shadows of veils
  • Cleavaged hues
  • Blinds with vertical slats
  • Shades that roll up are called roller shades.

Design Ideas for Hanging Curtains Over Blinds

Considering replacing your existing window treatments with drapes and/or blinds? Here are a few of our favorite looks.

Curtains Over Horizontal Blinds

Are you ready to replace your existing blinds with curtains? Some of our favorites are included in this gallery.

Prepare your home for the installation of curtains over the blinds you’ve always wanted? Some of our favorites are included in this gallery.

Curtains Over Roman Shades

Traditional blinds can look sloppy and dated when compared to the fitted appearance of Roman shades. If you’re looking for light management, Roman blinds aren’t the best option.

Don’t be afraid to experiment with textured finishes. Not all textiles and woods are created equal. If you want to add depth and flair to your room, textural treatments like woven wood blinds or velvet drapes can help.

Curtains Over Cellular Shades

For added privacy, light control, and insulation, cellular shades are the best option. Despite its honeycomb structure, the wall is nevertheless completely opaque. If you’re looking for ways to save money and reduce your carbon footprint, consider using internal cells. To ensure complete secrecy, there are also blackout settings available.

Pro tip: Do not use the same type of window treatments in every room of your house. If you can’t get rid of your old blinds, consider getting new curtains to give each area a distinct look and feel.

Curtains Over Vertical Blinds

Sliding doors and huge windows are ideal for vertical blinds since they open to the left and right, rather than up and down.

Styles and sizes are offered in a variety of vertical blinds. When the windows are open, the slats can be held in place by a simple chain at the bottom.

Don’t go crazy with the patterns, as a pro tip. For the best impact, use one print and one solid color combination. In addition, if you lift your blinds during the day, they will be hidden. The curtains, not the blinds, are the best place to display a gorgeous pattern.

Curtains Over Roller Shades

It has been a long time since the days when roller shades were made of white vinyl. You don’t have to give up on style just to save money when you can find them in a range of materials.

Roller blinds are your best bet if you want maximum light during the day and complete privacy at night.

Installing Curtains Over Blinds Has Never Been Easier

Hanging curtains and blinds on the same window shouldn’t require two people to complete the task.

It’s a breeze to hang curtains over blinds with the help of Kwik-no-drill, Hang’s damage-free curtain rod brackets. With just a few hammer taps, you can hang curtains without any measuring, drilling, or damage. A curtain rod is all that’s needed to complete the look!