Piece together a roll-up curtain using two different fabrics, wood battens, screws, hooks, and basic sewing supplies. A few basic sewing and measuring skills are all you need to get started making roll-up curtains for your home.
When you consider all the cords and strings that go with them, roll-up curtains appear to be a difficult window treatment to use. It’s true that they can’t be denied that they give your windows a little something more.
You’ll have to
Eleven methods to maximize the space on a tiny patio
- Two distinct types of cloth
- Two battens of wood (width of your finished blind)
- eyeballs that are screwed in
The battens are now in place.
1. Take a measurement of your window. Add 3cm to the width and 10cm to the length of each piece of fabric to get the correct dimensions.
In step two, sew the correct sides of the fabrics together.
3. Choose the fabric for the front of the blind, then sew hems of 1.5cm and 3cm onto the rear of the blind to construct casings for the battens. Insert the battens.
Place the screw eyes in their proper places.
The top edge of the top batten should have two screw eyes inserted into it (through the fabric) and the front of the blind should also have two screw eyes inserted.
A second screw eye should be inserted 5cm from the border of the blind into the base of the top batten.
attach the cord
The first step is to cut two pieces of cord. Depending on how long you want your blinds to be, you’ll need three times and three-and-a half times the distance between them.
Cords should be linked to the blind’s screws at the top, one at the end of each piece of cord. The longer piece of cord should be tied to the screw eye furthest from the extra eyelet.
Thread the cords
Cords should be threaded through each screw eye on the top batten and over to the second screw eye. 2. The cords should be positioned at the bottom of the blind and then threaded through each screw eye.
Hang the deaf and dumb.
Pull the blind up by tying the cords together at the ends and knotting them together.
To keep the rope in place when the blind is lifted, suspend it from the window frame using hooks and screw the cleat to the wall.
Why Roll Up Curtains?
Roll-up curtains are simple to make, and you may learn how to make them as we go along. Make a pulley system if you want to make it easier to control. Curtain building requires a certain level of expertise, however.
Step 1: Gather your materials
Gather the supplies you’ll need to make your roll-up curtains. To do this easy do-it-yourself project, gather the materials listed below:
- two unique pieces of cloth;
- a needle and thread of the same color;
- a tape measure or some other kind of fabric measurement device;
- one that is little narrower than the width of your blind;
- The length of your curtain’s breadth in double-sided Velcro tape;
- a machine for sewing;
- needle and pins for stitching
As soon as your materials are available, check to see if you can cut your batten and fabric to the exact size needed to cover your window…. It is preferable to acquire a pre-cut wooden batten.
Step 2: Prepare the fabric.
Get your fabric and cut it to the exact measurements you’ll be using. To begin, it’s a good idea to take a measurement of your window’s size. Blinds have a set life expectancy, which is something you can customize. The window sill may or may not be able to handle it.
Mark the location of the cut with a straight edge. Allow at least 1.5 cm for the seam allowance. This should be done on all sides of the two materials. The correct or patterned sides of the cut panels should face each other when they are sewn together.
Step 3: Piece the curtain together
Using the pins as a guide, stitch the two sides together using your sewing machine. Sew all the way around the bottom of the bag, too. Because you’ll be turning the curtain inside out, leave the curtain’s top open.
The patterned side of the curtain fabric should be visible once you’ve inverted the cloth. The side crease can be defined by pressing the fabric with your iron. Flatten it out and even give it a tailored look by pressing it.
The wooden batten pockets can now be added to the curtain now that its basic form has been established. Dropping the batten inside and pulling it towards the bottom of the fabric is a good place to begin. From both sides, sew a straight line to hold the batten in place.
Step 4: Attach the ribbons.
Put a pin through the top of your pre-cut string or cable. A fourth of the blind’s width from each side should be ideal. Make sure to pin two on the front and two on the back of the garment. ‘ This will assist in securing the item’s location.
The furry side of the velcro tape should be placed at the curtain’s front seam. Ensure that the fabric is transferred to the reverse side by folding it over. Pins can be used to keep things in place.
Before stitching the edges of the fabric.
Step 5: Finishing touches
Tape the sticky side of the velcro tape to the top of your window frame and secure it in place. Use the fuzzy side sewed on its back to attach it to the blind. With the roll-up curtain in place, you can simply roll or fold it upwards to get it to the desired height. To keep it in place, wrap some ribbons around it.
Roll-up curtains can be made from a variety of materials, including different types of cloth. Consider decorating the curtain itself with paint or embroidery.
Roll Up Pulley System
It’s possible to make a simple roll-up curtain with a pulley system out of screw eyes, two wooden battens, and a heavy-duty cable, but this method is more complicated.
Measuring and cutting your fabric to the desired measurements are two of the most common first tasks in any sewing project. Instead of the smaller ones we utilized in the above technique, you may require a wooden batten that is the precise width of your roll-up curtain.
Make a casing for the battens at the top and bottom of the curtain once the seams are sewed. Install two screw eyes towards the edge of the top batten. Another two should be positioned exactly below the blind and another at the top batten base, approximately 5 cm from the blind’s edge.
Get your cord and attach one end to the top of the blind’s single screw eye. Using the longer piece, join it to the farthest screw eye. Using the screw eyes on the curtain, attach the string to the back of the curtain and let it hang down. To hang your finished curtain, tie the ends together using the knots provided and then hang it with the hooks provided.
As a result of this tutorial, you now know how to create a simple roll-up curtain. The pulley system may require more time and effort, but you’ll get there eventually.