Updated at: 08-08-2022 - By: Sienna Lewis

A plush faux fur blanket is a great way to add coziness and style to your home. You may find that your blanket becomes more challenging to manipulate after prolonged use. For this reason, it’s important to know how to restore the plushness of a faux fur blanket.

Synthetic hair is used to create faux fur comforters. They are more practical than a real fur blanket and can be used year-round. Those blankets, however, do not have a particularly long lifespan.

It’s not as cozy when your blanket has lost part of its plushness. Now the question is, what do you do if your faux fur blanket has lost some of its suppleness? Don’t worry; with only a few easy actions, it will be as soft as the day you bought it.

How to Make Faux Fur Blanket Soft Again in 4 Steps

The faux sheepskin (or Sherpa blanket) is one of the most well-liked varieties of faux fur throws. It has two sides and is constructed of synthetic materials like acrylic and polyester. One side has a rough, wool-like texture knit into it, and the other is soft and fluffy.

How to Make Faux Fur Blanket Soft Again? - Sew Insider

This in-depth tutorial will show you how to soften a Sherpa blanket in no time. The roughness of the faux sheepskin is caused by pilling and dirt, thus taking care of the blanket is essential. Dust, grime, body oils, and hair can collect in polyester fleece over time, thus washing the blankets is recommended.

Always remember that different materials require different maintenance procedures. But before you start using the blanket, make sure you read the care instructions on the tag. Whatever the substance, these 4 actions are mandatory.

Step 1: Remove Excess Dirt and Oil

Cornmeal is an excellent dirt remover and one of the most useful household items. In addition to loosened dirt and grime, oil on your blanket can be removed with this method.

Simply get some cornmeal and sprinkle it all over the faux fur throw. You should clean the polyester fleece by working it in with a soft brush. A dish sponge will work just as well.

To paraphrase: ease up on the strain. Make sure you aren’t going to rip or tear your blanket by using a soft brush or sponge to clean it.

Then, after about 12 hours, take the cornmeal out from under the blanket. You should really wait till the next day to try it. That would make it capable of totally absorbing natural body oil and moisture.

You may want to massage the region to ensure maximum absorption. Shake and brush your blanket the next day to ensure that any excess powder is gone. If necessary, follow this easy method again.

Step 2: Eliminate Pilling

Pilling is the result of lint balls becoming lodged in the fabric, causing the threads to become entangled at their tips. Towels and the inside of washers and dryers accumulate the residue after repeated contact.

If the accumulation is not removed, friction burns could result. For this reason, timely pilling removal is crucial.

If you run a fabric lint or pill remover over the faux fur, the stray hairs will be cut away with the sharp blades. To remove unwanted hair, simply use a defuzzer or electric razor.

Pick one that works well with faux fur throws. Its intended use is to quickly and easily remove lint and fluff from a wide variety of textiles. The blades should be long lasting, razor sharp, and simple to swap out.

While using your sweater shaver, pills will scatter everywhere. Keeping your house tidy while you shave your blanket is easy with these tips. Tape is required for this easy trick.

If you want better results, take a bigger one. Make sure the adhesive side is facing out when you wrap it around your hand. It will prevent the pills from sticking to your blanket if you place it on top of your Sherpa throw. This should solve the problem!

Step 3: Brush Your Faux Fur Blanket

The act of brushing can revitalize the look of your blanket. Softness will return to it as well. This is why it’s important to brush it on a regular basis.

Place your faux fur blanket on a table or other flat, sturdy surface before you begin brushing it. The best tool for the job is a slicker brush or a cleaning brush with soft bristles.

Brush your blanket in each of the cardinal directions (up, down, and across). You can also use circular gestures. When you’re finished, there shouldn’t be any lumps.

Step 4: Wash the Blanket

Get ready to do some laundry; it’s wash day! Here are some suggestions for laundering your faux fur throws:

  • Using fabric softeners is a bad idea. When used, they can cause fur to clump together.
  • Your blankets will fare best if washed in cool water on the gentle cycle.
  • You can clean your faux fur blanket using a non-chlorine bleach solution, but you should only do so if absolutely necessary.
  • If you must use a conditioner, opt for one normally used on hair instead of a fabric conditioner. About 2 cups (0.5 l) of water and 1 teaspoon (0.1 tsp) of your hair conditioner should do the trick. Put the mixture in a spray bottle and apply it evenly to the surface. You should give your blanket a light brushing before washing it.
  • It’s best to dry things by air rather than using a dryer. The dryer can speed up the procedure, but only if the heat setting is set to zero.

Machine Washing

Only wash faux fur blankets in the washing machine as necessary. Even twice a year would be too much. The blanket could be worn out prematurely otherwise. This causes the blanket to tuft and mat over time, analogous to hair loss.

How to Make Faux Fur Blanket Soft Again? - Sew Insider

Reiterating, always use cool water and a moderate low-temperature cycle when washing in this manner. You can use laundry detergent in place of hair conditioner. Commercially available softening, scented, or bleaching cleaning products are too strong for artificial fur.

Manual or Hand Washing

You should only hand wash your fake fur blanket if it has no embellishments that could be damaged by water, such as beads or stitching. To preserve the blanket’s quality, avoid washing it in a machine, even though it is not required to clean it thoroughly.

Instead, wash your blanket by hand on a regular basis to keep it clean. It’s not a good idea to use any kind of bleach, whitening agents, or fabric softeners.

Sherpa fleece blankets benefit greatly from a mixture of white vinegar and detergent, and this is especially true when the water is on the cooler side. A lot of dirt can be loosened from the fibers and removed with this method. To clean a polyester blanket, simply immerse it in warm water and use a gentle detergent.

A sherpa blanket can also be referred to as a faux sheepskin. These throws are synthetically produced (like polyester, acrylic, or cotton blend). We can look at it from two different angles. To simulate the look and feel of genuine sheep’s wool, one side of the knit is soft and fluffy while the other is harsh and wiry. Besides being a great lining material, Sherpa fleece is also great for pet beds, throws, and other applications around the house. It’s lightweight, resistant to water, cushy, and easy to use.

There are several variations of sherpa blankets, including those with a sherpa lining, those with two layers of fabric, those with embroidery, and those with additional special requests.

You have to know why fleece fabric gets harsh if you want to soften it. It is common knowledge that polyester fleece is a fabric made from either recycled plastic or petroleum. The primary distinction between microfleece and fleece fabrics is in the tightness of the weave and the weight of the finished product. Fleece has a more substantial and relaxed knit. While lower-quality fleece may pill, high-end varieties do not.

Keep in mind that using hot water can damage the fabric, therefore it’s preferable to use cold water whenever possible.

Sherpa fleece blankets need to be washed often since they collect dirt and grime from the user’s hair and skin. You’re capable of handling everything on your own, right?

Remove Dirt from Faux Fur

To clean fur quickly and easily, simply sprinkle some cornmeal on it and brush it into the fibers with a bristle brush. Wait until morning to take it off. Next day, brush the blanket and shake it out to remove any excess before repeating the process. Cornmeal works best when massaged into the affected area until all moisture has been absorbed.

Remove Pilling

The term “pilling” refers to the tangling of the fleece fiber ends due to lint balls. Friction burns are caused by repeatedly touching lint-covered surfaces, such as towels or the insides of washing machines and dryers. You may use an electric fabric or sweater shaver to eliminate pilling. You should run a disposable razor over the blanket to shave it. Do not press too hard, or you might pierce or scar the fabric.

Pilling occurs when lint balls get caught up in the fleece’s fibers and cause them to become tangled. Over time, the accumulation of friction from rubbing lint on towels and the insides of washing machines and dryers can produce friction burns. To get rid of fuzzy balls, use an electric fabric or sweater shaver. Shaving the blanket can be done using a disposable razor. Be careful not to pierce or damage the fabric if you press too firmly.

Brush Faux Fur

Brushing regularly is the key to maintaining the pristine appearance of your faux fur. Brush the faux fur blanket in all directions using a pet slicker brush (a wire brush with stiff bristles) on a hard surface, like a tabletop (horizontally, vertically, and diagonally). Avoid leaving any clumps behind. This is the most comprehensive guide on caring for your faux fur, and it applies to all varieties.

Washing Faux Fur Blanket

A faux fur blanket may be washed in cool water with regular detergent and tumble dried on a low setting to provide years of comfortable comfort. In those rare instances where bleach is necessary, only non-chlorine varieties are permitted. Air drying is preferable, but if you need to speed things up, you can use the dryer without the heat.

Fabric softener is not only ineffective but also potentially damaging to artificial fur (it will make the hair stick together). Rather, fill a spray bottle with a solution made from one teaspoon of hair conditioner and two cups of water. Fur should be sprayed in problem areas, brushed gently, and then washed as usual.

Machine Washing a Sherpa Fleece Blanket

This calls for extensive care. Everybody should make a sincere effort to clean them up. Use the gentlest cycle possible and the coldest water possible while washing, and never dry this sort of blanket. Also, if you don’t have dish soap on hand, you can use laundry liquid or powder instead.

Also, keep in mind that bleaching, softening, or scented products would be too strong for this material. This may also harm the hair follicles and cause hair loss.

Put the fleece in a sweater bag and seal it up if you want to wash it. This will keep the fleece as warm and as comfortable as the day you bought it. Laundry detergent should be added to the washing machine before cool water (up to 86 degrees Fahrenheit, with low heat/no heat options) is added. The fleece can be rendered less fluffy by using soap to “strip” it.

Put some dishwashing liquid on the stain, rub it in with your hands, and let it overnight before washing to remove greasy or other tough stains.

Washing your soft throw blankets is the quickest and most convenient approach to make them appear like new again. White vinegar, however, is the one thing you must add to the wash if you want a miracle to occur.

All that remains is to prepare the blanket and to put the washing machine to its mild and low-temperature routine.

Fleece may be tumble-dried in a low or no-heat setting without losing its fluffy feel, and it also requires no ironing.

How to Make Faux Fur Blanket Soft Again? - Sew Insider

Machine Washing a Polyester Faux Fur Blanket

Polyester laundry calls for a combination of detergent and white vinegar in the same compartment of the washing machine.

Toss in all your dirty polyester clothing, but only if they’re all the same color. There is a correlation between the frequency with which you use the washer and the cost of your water and power bill. You can save a lot of time and money by doing the laundry all at once, which is why it’s recommended.

However, polyester faux fur can be made more pliable by using acetic vinegar when washing. This natural liquid is so thick that it can separate fibers, allowing the washing liquid to more effectively remove filth and debris from clothing.

When the smell of vinegar is really strong, it may be necessary to wash the clothes twice to get rid of it. Multiple washings would remove any remaining smell from your bedding.

Throw blankets and blankets made of polyester faux fur can be dried on a drying rack or clothesline without worrying about wrinkles.

Because of this, we recommend installing a dehumidifier in the blanket storage cabinet. This will keep the blankets from getting damp and musty.

Manual Washing Faux Fur

Washing the blanket in a machine could harm any delicate embellishments, such as stitching or beads. To play it safe, it’s preferable to continue with the tried-and-true methods of the past.

That item doesn’t require a complete washing because it’s so easy to care for. Run it through the washing machine in cold water on the delicate cycle without any bleach.

Hand Washing a Sherpa Fleece Blanket

Before beginning, have the basin, hose, detergent, and white vinegar ready. Shaking the blanket is the first step in making sure it is clean.

Pour some vinegar into the sink. Throw the blanket into the basin of water after rinsing it. Around the half-way mark is a good target. Overflow may occur if the blanket is completely submerged in the basin.

The blanket should be soaked for about fifteen minutes in a basin of water, after which the cleaning solution should be rinsed thoroughly. We anticipate that soaking will give the vinegar a chance to work its magic and loosen the fibers, restoring the faux fur’s suppleness. And the detergent would have more time to do its job of cleaning.

After that, hand-wash it. After the blanket has soaked, give it a good wash and a thorough rinse until the vinegar smell is gone and no soap residue is visible.

Hand Washing a Polyester Faux Fur Blanket

It is recommended that you wash your polyester items in water no hotter than 120 degrees Fahrenheit with a moderate detergent (no bleach or fabric softeners) (vinegar is allowed though). It’s not a good idea to wash polyester with other fabrics.

Dry it more quickly by tumbling it with a tennis ball in the barrel at the lowest feasible temperature. Additionally, no additional fabrics, softeners, or softeners are allowed.

FAQ About How to Make Faux Fur Blanket Soft Again

How Do You Make Your Faux Fur Blanket Smooth?

Make your own fabric softener by mixing 4 cups of water with 2 tablespoons of hair conditioner. Put the homemade solution into spray bottles and use them to restore the softness of your blanket with a light brushing.

How Should I Wash My Faux Fur Blanket?

You can machine wash faux fur whenever you choose, just like you can with fleece. To prevent any damage, however, only use a very tiny amount of a light detergent and cold water.

Front-loading machines, if available, are preferable over top-loading machines for laundering imitation fur.

It’s important to use a soft cycle when washing delicate items. Not suggested for use in a load with other fabrics or rags.

Amazon.com: YUSOKI Black Faux Fur Throw Blanket,2 Layers,50" x 60", Soft Fuzzy Fluffy Plush Furry Comfy Warm Cozy Blanket for Couch Bed Chair Sofa Bedroom Mens Gift : Home & Kitchen

How Can I Soften My Fluffy Blanket?

Dry your blanket with four to five reusable dryer balls. These balls will’massage’ the blanket as it dries, resulting in a softer end product. So that the faux fur fibers don’t get bent, you should use air fluff or a low heat setting.


It’s true what they say: a faux fur blanket is the best of all worlds. But after some use, they lose some of their suppleness and their aesthetic attractiveness. When your faux fur blanket loses its softness, rather than tossing it away or buying a new one, try these solutions.