Updated at: 29-11-2022 - By: Sienna Lewis

What you’ll need for two pillowcases is

  • Standard and queen pillowcases (20′′ x 30′′) require 2 yards of cloth.
  • King-size pillowcases require 2.5 yards (2.3 meters) of fabric.

I’d suggest making a 10 percent bump in your purchase. The reason for this is that pre-washing and drying your fabrics may cause them to shrink.. You may also lose a few inches of fabric if your yardage is cut incorrectly by a fabric merchant.

In the following, I’ll show you graphs that demonstrate:

  • The amount of fabric needed for each size of pillow.
  • How much fabric will be left over.
  • Choosing between 45′′ and 58′′ wide textiles.
  • Envelope pillows (which have an inside flap) and invisible zipper types require more fabric.

How much fabric for a pillowcase?

If you’re planning on making some gorgeous new bedlinen and need some advice on how much fabric you need, you’re in the right place! A fresh set of sheets, a new duvet cover, and new pillowcases can completely transform the look and feel of your bedroom.

Redecorating your bedroom is a painstaking process, therefore this is a quick and simple solution.

Bed linen is an excellent sewing project for novices because the patterns are simple. If you’re a seasoned seamstress, you may even use an old pillowcase as a template and not bother with a pattern.

We’ll walk you through the process of figuring out how many pillowcases you’ll need and how much fabric you’ll need to make them.

How to Sew a Pillowcase • 2 ways • 1 yard of fabric - MADE EVERYDAY

What kind of fabric to make a DIY pillowcase?

Linen bed linens are among our favorite types of bedding, so we’re well-versed in their benefits. Summers are kept cool, and winters are kept warm, and that’s just what we like about it. And how gentle it is on the skin of everyone in the family.

Cotton is a popular choice for natural bed linens. Linen, on the other hand, is a far more environmentally friendly material.

When it comes to bedding, silk is one of the most sumptuous options. However, it can be a bit pricey, so it may not be suitable for everyone.

Bed linens made of synthetic fibers are usually not the best choice. It is possible for them to attach to the skin and lead to overheating. Using natural or natural-mix fabrics for your pillowcases is highly recommended if you’re sewing your own.

What size pillowcase are you making?

The size of your pillows will determine how much cloth you need to make a pillowcase. Standard, Queen, King, and Body sizes are all available for pillowcases.

20 inches wide by 26 inches long: that’s the standard size for pillows.

There are 20 inches and 30 inches in a Queen size pillow.

The dimensions of a king-sized pillow are 20 by 36 inches.

Additionally, the dimensions of a standard body pillow are 20″ x 54″.

In order to begin sewing a pillowcase, make sure you first measure your pillow.

How to measure how much fabric to make a pillowcase

When creating pillowcases, here’s how to figure out how much fabric you’ll need to buy. One standard-sized pillowcase can be made from around a yard of fabric. You’ll need 2 yards of fabric to make two pillowcases; if you’re sewing more, keep adding one yard at a time.

The width of the fabric will have a role in this. You may be able to get away with using fewer yards if your cloth is particularly wide. One Standard size pillowcase can be made from a single yard of 46′′ wide cloth (the most common width).

Flatten the pillow on the bed to see if it is a King or a Queen size. From the top seam to the bottom, measure the breadth. Using your measuring tape, measure the length of the pillow, then divide this figure by two to get the width of the pillowcase.

Don’t forget the seam allowance in your measurements; this is a key part of the process. Depending on whether you’re constructing an envelope pillowcase, add 4-5 inches to the length and 1/2 inch to the breadth of the seams.

If your fabric hasn’t been prewashed, it may shrink when you wash it for the first time. Before cutting, wash your fabric to ensure you have enough.

Cut two rectangular pieces once you have the correct yardage. Due to the envelope flap, one will be longer than the other. These are the measurements you’ll need:

Standard & Queen pillowcase

21 2/8′′ x 37 6/8′′ in the front

21 2/8′′ x 31′′

King size pillowcase

The front is 21 2/8′′ x 48′′.

It measures 21 2/8′′ by 41 2/8′′ on the back.

The front and back materials might be of different colors and patterns.

If this is the case, you’re good to go!

Simple DIY pillowcase sewing tips

Even if you’ve never made a pillowcase before, it only takes a few minutes to make a beautiful one. We’ll base our design on the envelope flaps found on the majority of pillowcases. Also, we’ll show you how to do French seams so that there are no raw edges in your garments. You’ll need to seek out specific instructions if you want to make pillowcases in a variety of styles.

How to Sew a Pillowcase • 2 ways • 1 yard of fabric - MADE EVERYDAY

What you need to do is as follows:

  1. Put the two pieces of fabric together so that they face each other. The envelope flap will have a longer piece.
  2. Make a 2/8-inch and 3/8-inch fold in the short side hem of the longer piece (folding from the wrong side).
  3. It’s ready to go.
  4. The short hem of the smaller piece is sewn in the same way.
  5. Create a seam by sewing the folded edges together.
  6. Put the two pieces on top of each other with their right sides facing each other.
  7. Fold the overhanging envelope flap beneath the other piece of fabric and secure it with a button.
  8. Leave the flap side folded in and secure with pins on all three sides.
  9. Leave a 2/8-inch seam allowance when sewing these together. The flap side should not be sewn up!
  10. Leave a 1/8′′ hem after trimming the extra seam.
  11. Turn the inside out.
  12. Then flip it over and do the opposite.
  13. All three sides should be ironed and pinned, but just the flap should be stitched.
  14. Sew a 3/8′′ hem on the bottom of the garment.
  15. Turn to the right.
  16. Voila! To get started, insert the cushion.

Look no farther than our wide selection of high-quality European linen if you’re seeking for a beautiful fabric to sew with. Go here and here for more sewing advice.

Pillow Measurements

Your pillow’s breadth should be measured. This is the distance from the pillow’s top seam to its bottom seam as it rests on the bed. You can use this measurement to determine the thickness of your pillow if the seams are centered on top and bottom; if there are no seams, simply wrap the tape measure all the way around the pillow vertically and divide by two. B is the pillow’s total length, measured from one side to the other. If you wish to tailor your pillow case to a certain pillow, this is the starting point for your fabric selection.

Standard Sizes

Using typical pillow measurements will help you decide the amount of fabric you’ll need to produce a number of pillow cases as gifts. Pillow sizes range from 20 inches wide by 26 inches long for a standard-sized cushion to 20 by 36 inches wide and long for a king-sized pillow. If you don’t have a pillow to measure with, or if you want to sell or give away the pillow cases, use these measurements to manufacture pillow cases.

Seam Allowances

Adding a little bit of length and width to your pillow measures will enable for sewing the seams of your pillow case. In order to have a 1/4-inch seam on each long side of the pillow, add 1/2 inch to the measurement A. The pillow case’s closed end should be 1/4 inch longer than the pillow itself, so add 1/2 inch to the measurement B and anywhere from 3 to 5 inches to the overhang on the open end to keep the pillow case closed.

Fabric Yardage

A fabric store is a great place to find out how many pillow cases one piece of cloth can produce. On the normal pillow case, your A is 20.5 inches and B is between 29.75 and 31.75 inches long. To build a pillow case, you’ll need two pieces of fabric that measure A by B. For a normal bolt of cotton fabric, you can fit two measurements A across the cloth’s width, and you need to make sure the length matches B. So, one yard of fabric will yield one pillow case, plus some scraps.

How to Measure Fabric for Making Pillowcases?

Measure your pillow before you begin sewing a pillow case. It’s because you can figure out how much cloth you’ll need this way. The following are the stages involved in measuring the material for a pillow cover:

Step 1:

Make certain that the pillow fill is stuffed and fluffed in an even manner.

Step 2:

Next, you’ll need to take note of the pillow’s overall dimensions.

Step 3:

Hold a tape measure or other measurement tool. Make your way under the covers. To finish it off, simply tie a loose knot in one end and then the opposite end.

Step 4:

Subtract 2 from the overall measurement to determine how much material is needed for one side. So you may receive dimensions for both the front and back of the garment. ‘

Step 5:

To account for seam allowances, increase the overall measurement by one inch. That’s an extra half-inch on each side.

That’s all there is to it! We’ll need to take one more step if you insist on having your measurement in yards. It’s as simple as multiplying the number by 36. And you’ll get exactly how many yards of fabric you’ll need.

Make sure you collect measurements on both sides at the same time. Measurement tape can be snugged up to a point that is neither too tight nor too loose for this purpose. Your pillow cover will shrink if you squeeze it too hard. However, if the measurements are too loose, it will be excessively big and unfitting.

How Much Fabric Do I Need for A Pillowcase?

A typical pillow measures 20 inches wide by 26 inches long. Making a pillow cover, on the other hand, isn’t constrained by the specific dimensions of the pillow itself. Instead, you’ll need cloth that’s more than twice as big.

As a result, the normal pillow size is 22.5 inches wide by 31.5 inches long. The seaming and fill depth will be adjusted as a result of this. You can save 4 inches for hemming, however.

If you are constructing a standard-sized pillow cover, 1 yard of fabric with a 45-inch width works best. To do so, you’ll need to wash and dry your fabric first.

If the preshrinking process goes awry, you’ll need an additional 2 inches of fabric. However, if you choose a different pillow cover size, the amount of fabric required will be different.

Let’s keep you on the safe side, whichever pillowcase size you like. If your fabric is 45 inches wide, you’ll need between 34 and 1-12 yards to make a pillow cover.

How Much Fabric for A King Size Pillowcase?

Having a king-sized mattress or bed means everyone has plenty of room to stretch out. A king-sized bed calls for a corresponding king-sized pillow cover. It might be a luxurious addition to your bedroom or a thoughtful gift for someone special.

What kind of cloth do you need to use to produce a king-sized pillowcase? Don’t worry, we’ve got it figured out. All you’ll need for this project is one and a half yards of 45-inch-wide fabric.

You can produce a 20-by-36-inch pillowcase with this much cloth. Nonetheless, 2.5 yards is ideal for a 20 by 40-inch king-size pillow cover.

However, we recommend sizing up by 10%. It’s because pre-washing can cause it to shrink. It’s now possible to alter the yards dependent on the length of your material.

Generally speaking, all pillow coverings are the same size and shape. Thus, there is no need to make any changes. Hypoallergenic material is best if you’re allergic or asthmatic, so choose wisely.

How Much Fabric for A Queen Size Pillow Case?

Yes, that’s correct. It’s a little smaller than the “King” size pillowcase. Surely, you’d like to know how much fabric it takes to make one of these pillowcases.

You will need 1-1/4 yards of 45-inch wide cloth to make a queen-sized cushion cover. You’ll get a queen-sized pillowcase that measures 20 by 30 inches.

Before cutting the fabric for your pillow cover, be sure to wash and dry it thoroughly. You’ll be able to remove the filler more easily. Preshrinking your material is an absolute essential after that.

To make one of these pillowcases, you’ll need to cut it down to around 40 inches long using the fabric’s width. You’ll be able to make a queen-sized pillow for yourself in just 30 minutes!

How Much Fabric is Needed for A Burrito Pillowcase?

Creating a burrito pillowcase for yourself would be a dream come true for any sewist who enjoys sewing. You’ll notice right away that these pillow coverings are smaller than the usual or regular size.

It takes 34 yards of fabric for the main burrito pillowcase to make one. Material with a 9-inch length and any width is on the table. For the cuff, you’ll need an additional 14 yard.

Make a note that this pillow cover will only require one yard of cloth. In the event that you prefer to measure in terms of width, we provide that option as well.

Multiply the width of the fabric you’ve chosen by 25 inches. All you need for a primary pillow is this one. Use only fabric with a single direction. It will ensure the effectiveness of your design!

How Much Fabric Do You Need for A Travel Pillowcase?

Traveling is an enjoyable experience. However, joy is not without its share of sorrow. The spine and neck will suffer if you sit in a boring position for an extended period of time. What would you do if you wanted to avoid spraining your neck in the process?

If you’re going to be on the road, bring a travel cushion. Also, if you’re crafty and enjoy sewing, you may construct your own travel pillowcase.

The dimensions of a 12-by-16-inch travel-size pillow. As a result, you should be concerned about the amount of cloth you’ll need to make this cover.

We’ve all heard it before. Fabric that is 24 inches long and 25 inches broad must be purchased. It indicates that if your fabric is 45 inches wide, 34 yards of material is more than plenty.

The type of fabric you use for your pillow cover might also affect the amount of yards you need. 12 yard of cotton is ideal for the main body of a garment. A quarter-yard piece of Minky fabric would be preferable for this purpose.

How Much Fabric for A Toddler Pillowcase?

Exactly. You owe it to your child, too, to provide him or her with a cozy cushion and a fun pillowcase. The size of a toddler pillow cover is comparable to that of a toddler.

A toddler pillow is typically 14 inches by 19 inches in size. As a result, you’ll need extra fabric than the dimensions of your pillow for the cover.

It takes no more than 12 yard of main fabric to make a cute toddler pillowcase (any color of your choice). Add a third of a yard of cuff fabric and a sixth of an inch of accent fabric.

You’ll soon discover that a standard-sized cushion isn’t big enough for your toddler’s growing head. I recommend using an enormous pillow for this purpose. It’s time to make a new pillow cover for the increased size!

How much fabric for a pillowcase? | Linenbeauty

How Many Yards of Fabric Do I Need to Make 2 Pillowcases?

It’s easy to figure out how many yards it takes to make two pillowcases if you know how much you need for one. Is this still a problem? Let us tell you what we know.

You can buy 1.5 to 3 yards of cloth to construct two pillow coverings. Depending on the size of your pillow, you may need more or less fabric.

Consider, for instance, if you have an enormous king-sized cushion. Using 2.5 yards of any fabric to make a king-size pillowcase seems to be the right amount.

When it comes to pillowcases, 2 yards of cloth should plenty if your pillow is standard-sized. Queen-sized pillowcases require the same care and attention to detail. Remember to buy 10% more fabric than you think you need.

Thus, even if the material shrinks or the seller cuts it wonky, you won’t lose an inch of material.

Concluding Words

Sewing is both an art form and a pleasant hobby. Creating a pillow cover of one’s own sounds like a lot of fun. No one likes a pillow that’s excessively big because of its oversized pillowcase.

If your pillow cover is too tiny or too tight, the same thing will happen. Your ignorance of the ideal fabric measurements for a pillow cover is to blame for this mistake. To avoid making such mistakes, you begin to inquire.

A pillowcase takes about how much fabric? But now that you’ve read our post, you’ll be well-versed in the subject. A king-sized or queen-sized pillow, the Burrito or travel pillow, or one for your child, there’s something for everyone’s tastes here.

Start creating a pillowcase right now by purchasing the precise amount of fabric you need!