Updated at: 20-09-2022 - By: Sienna Lewis

Two steps are required to learn how to embroider a pillow. Beginners can start embroidering even if they’ve never done it before. Embroidered pillows are a great way to show your friends and family that you care about them.

This project allows you to be as creative as you like in how you complete it. You can even select the method that is most convenient for your own needs.. Here’s a step-by-step tutorial on how to embroider a pillow.

How To Embroider A Pillow For Beginners

Step #1. Design

Pillow embroidery is a straightforward process, but you must sketch out your design first, just like you would with any other job. Many motifs and patterns are available for embroidery, which is a wonderful feature. You can even use an embroidery pen to freehand the design or text if you’re skilled enough.

The name, word, or phrase might be spelled out in a large font to ensure a professional appearance for a first-timer. Then, use an embroidery pen to trace the screen of your computer or laptop onto your pillowcase. You can use this method to duplicate any design you like.

Embroidery can begin after you’ve traced the pattern. Using two rings of the embroidery hoop, attach the smaller one into your pillow liner. The initial letter or part of the design will be encircled by the larger circle on top.

Embroidered Pillowcases : 8 Steps (with Pictures) - Instructables

Step #2. Get started

A novice embroiderer may be baffled by the process of shading in your design with stitches. Start with the first letter after you tie a knot on one end of the embroidery thread you just introduced into the needle. To sew the design onto the pillowcase, insert the needle into the corner of the design.

In order to complete this task, bring the needle back through the other corner and finish the threading. You’re now filling in the design or letter with stitches. Tie the thread once you’ve completed that portion of the word or arrangement, then continue on to the rest of it.

Embroider a pillow by tying off the thread once you’ve filled in the design. Your speed will improve with time and repetition. The idea is to take your time and experiment with a variety of styles and color schemes.

Types Of Hand Embroidery Stitches

Learning to embroider a pillow can be difficult because there are so many stitches to select from. In order to be able to embroider knitted pillows, you’ll need to learn some fundamental hand embroidery skills. If you’re just starting off, here are some of the best options:

Running stitch

The running stitch is the most commonly used stitch in embroidery. You’ll simply run your thread and needle up and down at a predetermined distance from the name. With this stitch, the front of the fabric is more likely to show more lines than the back.

Chain stitch

The chain stitch is one of the most common stitches used in needlework. People all across the world will see it. The petal-like look of the chain stitch makes it a wonderful decoration.

Cross stitch

Cross stitch is a popular stitch used in needlework. The Danish style and the conventional style will be mentioned by experts. Because the former sews the diagonal threads one at a time instead of all of them at once, they are distinct from the latter.

Back stitch

The name “back stitch” comes from the fact that the thread is taken backwards instead of forwards when performing this stitch. If your design includes curves or if you like a continuous stitching, this stitch is for you. Back stitches are another option for securing seams.

Satin stitch

The back stitch can be used to outline the simple satin stitch after you’ve learned it. To keep it simple, don’t leave the stitches too loose or too tight. This is a good rule of thumb. But it’s great for filling designs as long as you have a stitch to keep it in place.

Stem stitch

Stem stitches can also be used as a beginner’s method of embroidery. Designs featuring curves, for example, can benefit from this technique. Sewing and stabbing are also options for creating a stem stitch.

Feather stitch

The feather stitch is a great way to add visual interest to your embroidered pillow. French knots and other decorative stitches benefit from its inclusion. Furthermore, the use of feather stitches in the fills and borders of a piece is particularly effective.

Herringbone stitch

Using a simple herringbone stitch, you may make a cross that is cut in half. As a result, it can be used to embroider words. A herringbone cloth-like look can also be achieved using herringbone stitches.

French knot

When embroidering a cushion, you’ll need to know more than just the basic stitches. Knots enhance the appearance of some conventional patterns, such as flowers and circles. With the French knot, even a novice can alter the fabric’s texture.

Why Create & Embroider A Custom Pillow?

You may easily alter the pattern of your pillow, whether it’s for a beachy look in your living room or a charming throw pillow for a small girl’s room. Fabric and design choices can have a big impact on the aesthetic of your outfit. It’s easier than you think to figure out which stabilizer to use with each fabric, so check out our comprehensive guide to embroidery stabilizers.

You may alter the accent of your room as often as you wish on a cheap (shh, no one has to know) by making new pillowcases and swapping out the actual pillow.

You’ll not only get to create something that you’re sure to adore, but you’ll also save money in the process!

Supplies Required For This Embroidery Pillow Project:

  • A couple of complementary pieces of cloth.
  • Ribbon
  • A 16-inch pillow sham
  • Daisy is a floral pattern.

Daisy pillow with ribbon trim project tutorial:

Step 1 – Embroider your daisy design on your fabric, then square it up. A 12-inch square serves as our focal point in this instance.

A serge or an over-edge stitch can be used to protect your embroidered piece.

The thread end has been tied off, and the serged edges may be seen in this photo.

Centering your embroidered item on the other fabric used for the pillow front is the final step. Your larger square should be 17 inches for a 12″ seam allowance on a 16 inch pillow form. If you want to make your larger square even more sturdy, you can serge the outside of it.

Step 4 – Sew your embroidered piece to the bigger square with a basic zigzag stitch.

Trim the centerpiece with a 7/8″ ribbon. In order to hide your zigzag stitching and keep your trim in place, draw a 12″ border around your central square. You can see where to pivot your stitching by extending the lines past the corners.

Rather than attaching the trim at the bottom of the central square, hide the ends at the bottom left corner. Begin by sewing along your marking line, leaving about 14″ of ribbon at the beginning to turn over at the end.

Make sure that the folded edge of your ribbon is aligned with the marking line by turning it under slightly. Stitch close to the ribbon’s outer edge until you reach the first corner, then turn the piece over.

Stitch until you reach the second edge marking line, which is at the corner of the piece. Turn your item by raising the presser foot and pivoting it.

Step 8 – Pin the ribbon in place along the marking line. To avoid catching on anything, carefully fold the ribbon corner out of the way and stitch down the outer border to the next corner. After stitching the third corner, finish the fourth side of the ribbon by pausing 2-3 inches from the end and lowering the needle.

Step 9 -At the last corner, the needle should be down about 3″ from the corner. Trim the end of the ribbon about 1″ past your corner. Fold the ribbon back along the edge of the ribbon on your beginning edge.

The needle should be around 3 inches from the corner at this point. Using a pair of scissors, cut the ribbon 1 inch past your corner. When you’ve finished folding the ribbon, tuck the ends under the ribbon at the beginning.

Create a 45° mitered corner by folding the end of the ribbon under. Pin in place and continue pinning the ribbon’s inside edge on all four sides.

Make a mitered corner at each corner of the ribbon and pin it in place.

Start your seam a few inches past the first corner instead of stitching on the corner itself. This will assist hide the seam’s beginning and termination.

Stitch down the mitered edge until you reach each corner, and then reverse your stitch back to the inner corner, as shown in Step 13. Presser foot raised and piece centered before continuing to sew with needle down.

Finally, you’ll have four perfectly mitered corners and your trim will be buried in a corner when you’re done.

The front of your cushion should look like this when finished. Stitch 12″ seam allowances on a 17′′ square backing piece and use a 16′′ pillow form to finish your creation.

Step 16: The End! You’ve finished making your one-of-a-kind throw cushion.

How To Embroider A Pillow. Best 2-Step Guide - Krostrade

Here’s what you’ll need for your embroidered pillow:

  • insert for a pillow
  • Colorless textiles (non-stretch)
  • In a range of hues, embroidery floss.
  • Darning needles, which have sharp points but huge holes, are ideal for knitting.
  • Stitching hoops
  • Scissors
  • Obtain a copy of your quotation and keep it handy.
  • Pencil

Step by Step Guide To Craft a Throw Pillow:

Step 1: Prepare and cut fabric

Start by cutting out your fabric. On all sides, the front piece should be about a half-inch larger than the pillow. To make room for the pillow, cut two back pieces that overlap each other. For a three-inch overlap, the back pieces should be the same width as the front parts. As a result, my front piece was 13×11 inches and my back pieces were both 13×7 inches, resulting in a 12×10-inch pillow.

Step 2: Stencil

The printout should be a little smaller than your throw pillow, so be sure to use contrasting fonts for more interest. Turn it over and scribble extremely aggressively over the text sections with a pencil (you should be able to see through the paper enough to do so).

Step 3: Place on fabric

Turn the text around and place it on the fabric after you’ve scribbled all over the back of it. To keep it in place, I taped it down with scotch tape. Each letter should be traced in its entirety. When you apply pressure to the fabric, the pencil on the back of the sheet should transfer to it.

When you’re done tracing, it should look something like this.

Step 4: The embroidery tine

I’m ready to get started with the embroidery. A classic backstitch can be used to trace the pencil lines around your first letter. Continue stitching until all of the letters have been completed. Each letter of my statement, “live colorfully,” was represented by a different color string. Continually adjust your embroidery hoop as you work.

Step 5: Assemble

It’s time to put the pillow together. With a one-inch seam allowance, stitch the long edge of one of the back pieces over.

Step 6: Sewing process

As a last step, you’ll pin all three fabric pieces together. Put the embroidered piece on your work table with the right side facing up. Then, with the right side facing up and the bottom and side edges flush with the front piece, attach the hemmed back piece to the top. Make sure the top of the unhemmed back piece is flush with the front piece’s top edge. Sew with a 1/2-inch seam allowance around the perimeter.

Step 7: Ironing

Turn it right side out, iron if needed, and stuff the pillow inside. And your throw pillow is finished!

How To Embroider Pillowcases?

Fill the pillow with the right side out and iron if necessary. You’ve just completed your throw cushion!

What stitch should I use for a pillowcase?

a stitch that alternates between two directions

A zigzag stitch (or a serger) should be used to finish the entire edge. Zip the long side of the pillowcase closed with a 14″ seam allowance, sealing your stitch at both the beginning and the end of the piece of Fabric A. Then, zig-zag stitch the raw edge to complete.

What are the steps in making a pillowcase?

Pillowcase Instructions

  1. Cut the fabric to size. To begin, cut two pieces of cloth with the same dimensions: 29.5″ long by 21.5″ broad. …
  2. Fold the fabric, iron it, pin it, and stitch!…
  3. The second piece of fabric should be used to complete step 2.
  4. Pin and stitch the pieces together….
  5. Simply turn the pillowcase over and you’re set to go.

Can you embroider without an embroidery hoop?

Other styles of embroidery don’t necessitate a hoop or frame to be worked on. When it came to the delicate whitework designs of Madeira, for example, skilled embroiderers used their hands and a finger to judge tension.

What do I stuff a pillow with?

The 10 Best Pillow Stuffing Materials

  1. Stuffing for down pillows. Terry Cralle provided the image….
  2. Pillow Stuffing Made From Feathers. Terry Cralle provided the image….
  3. Stuffing for Polyester Fiberfill Pillows. Terry Cralle provided the image….
  4. Stuffing for Memory Foam Pillows.
  5. Pillow Filling: Buckwheat
  6. The Stuffing for Kapok Pillows
  7. Filling with Cotton Pillows.
  8. Filling for latex pillows.

What is the yellow stuff on pillows?

Yellowing is caused by what? The yellow dots you see on your skin are created by perspiration. Even if you’re not aware of it, you can still sweat while you’re sleeping or resting. Sweating is released into the pillow by the head or face resting on it for long periods of time.

How do you keep pillows fluffy?

The cushion may be fluffed simply by running it in the dryer. Once a month, you can throw your pillows in the dryer to get them clean and fresh. A few minutes in the dryer with the tennis ball in the sock and the sock tied together is all that is needed. Fluffy pillows are ideal for a restful night’s sleep.

What is the first step in sewing a pillowcase?

How to Make a Pillow Case by Hand

  1. Decide on the fabric first. The best part is choosing the cloth….
  2. Step 2: Cut Out Your Pattern.
  3. Fold the fabric….
  4. Pin the (Font and Back) sides together in Step 4…….
  5. The final step is to sew….
  6. The final step is to cut the thread….
  7. This is the final step….
  8. The pillow should be inserted.

What are the 4 steps to sew a pillow?

  1. Take a measurement of the pillow insert. Take a measurement of the pillow insert’s measurements…
  2. Measure the height and the width. For rectangle inserts, be sure to take measurements for both the height and breadth of the insert. …
  3. Set up a recurring pattern.
  4. Pick a Pattern Layout….
  5. … Prepare the Pillow Fronts by cutting them out.
  6. It’s time to get rid of that pillow!
  7. The edges of the fabric should be pinned.
  8. Glue the Pillow Parts Together.

Can you use any needle to embroider?

Needles of various sizes are required for various types of textiles and embroidery. Select the needle that is most appropriate for the task at hand. Size of needle depends on fiber count of the fabric you are sewing on as well as the thickness of thread you are working with.

What does floating mean in embroidery?

It is common for embroiderers to utilize a method called floating when the item they want to embroider is too small to be hooped or otherwise unhoopable. To summarize, all you need to float is a stabilizer hoop…. A basting box or pins can be used to attach stabilizer to a piece of fabric.

Pillow for baby - embroidered flowers | Hand embroidery designs, Hand embroidery projects, Hand embroidery videos

Using Others’ Ideas

It is against the law to steal embroidery designs from the copyright holder. An embroidery design owner’s consent is required to utilize their patterns, according to the Embroidery Copyright Software Coalition (ESPC).

How do you seal the edges of silk?

Fraying fabric edges can be contained with nail paint, which is a simple, effective, and reasonably priced solution. It is most effective when paired with airy, thin garments. The cut edge of the fabric is coated in a thin layer of nail paint.

How do you finish the mesh edges?

That way, the band will sit flat against your skin.

  1. Cut the mesh strip with a utility knife or similar tool. Cut a mesh strip of the same length as the edge of your garment.
  2. Position the stripe. Make a half-circle out of the strip of fabric (if the fabric is slippery, baste the layers together along the center of the strip). …
  3. So, here’s how you do it:
  4. To complete the process, simply press the Finish button.

What is fabric with embroidery called?

From 11 count to 22 count, most Aida is available. A 14 count aida cloth is the most commonly used fabric for hand embroidery. Certain types of counted thread stitches, such as Hardanger and pulled thread work, are not possible on Aida.

What is the coolest pillow filling?

The greatest quality down is Hungarian goose down, often known as European white goose down. Pure white down clusters, larger than the majority of other varieties. There are no feathers in a real down cushion. Oftentimes, “down” is advertised as a combination of down and feathers.

What can I use instead of pillow stuffing?

As an example, consider the following.

  • Tights or socks that have been worn out. Nylons are the best, but woolly ones will work just as well….
  • T-shirts and sweaters that have seen better days. These, too, should be spotless….
  • Tissues, whether they be made of tissue paper or not…
  • An article in the newspaper…
  • Bags made of plastic.
  • Packing supplies…
  • Recycled toy stuffing…
  • A pillow’s stuffing.

What is the best material for a pillow?

One of the best cushion materials you can use is recycled cotton. A pillowcase or cover made of recycled cotton is ideal because cotton stuffing tends to clump. Cotton that has been repurposed saves water and helps the environment by repurposing waste materials.


Want to personalize your pillow or pillowcase with a unique design? Why not learn how to make a pillow out of embroidered fabric? Because it’s been around for so long, this decoration isn’t going anywhere anytime soon.

Using an embroidery pen, draw an outline of the design you desire on the back of the pillow and begin stitching. Start small and work your way up to covering the entire design in stitches. Finish by tying the thread each time you begin a new section.