Updated at: 22-08-2022 - By: Sienna Lewis

Cleaning Tempur Pedic pillows can be difficult due to its fragile memory foam construction. When it comes to Tempur Pedic pillows, you can’t just throw them in the washing machine and expect them to come out clean.

Using water to wash them can cause the material to break down, so be careful. You can damage the comfort of your Tempur Pedic pillows with a single misstep in the cleaning process.

The good news is that there are ways to maintain your Tempur-Pedic pillows fresh and clean. Read our article and find out how to clean your pillows as well as how to remove the stains and odors and keep them smelling fresh.

Let’s begin with what you should avoid.

What To Avoid When Cleaning Your Tempur Pedic Pillows?

The memory foam in Tempur Pedic pillows, as previously mentioned, is exceedingly delicate and can be damaged by some cleaning methods, rendering the pillows worthless.

Easy Steps to Clean, Wash, & Sanitize a Tempurpedic PIllow or Mattress

Because of this, you should never wash or dry your Tempur Pedic pillows, especially in a washing machine or dryer. Avoid using harsh detergents and industrial cleaners as well.

Avoid using excessive amounts of water while cleaning them by hand, since this can also harm the memory foam composition. Tempur Pedic pillows should not be washed with hot or warm water and should not be scrubbed or twisted.

How To Clean Your Tempur Pedic Pillows?

Cleaning the Covers

Tempur Pedic pillow coverings should be washed first. The coverings on the majority of Tempur Pedic pillows can be removed and machine washed.

Check the tags on the garments for washing instructions after removing the coverings. Washable coverings for most Tempur Pedic pillows are also available.

Use a light detergent and a cold temperature in the washing machine. Stain removers that include strong chemicals, such as chlorine, should be avoided. You can use a dryer with a cool setting or even a clothesline to dry the covers.

Keeping Pillows Fresh

If you want to maintain your pillows smelling clean and fresh, you can roll them like sleeping bags and then unfold them and continue this process with pillows rolled in the opposite manner.

To get the best results, you should do this outside when the weather is pleasant and your pillows can be exposed to the sun. Your pillows will be able to breathe better after this treatment.

Removing Unpleasant Odors

There are two methods you may use to get rid of bad odors in your pillows: sprinkle them with baking soda and let them sit for at least a day, then shake them or use an upholstery vacuum cleaner attachment to remove the soda.

It’s possible to remove pet urine odors with liquid enzymatic cleanser or vinegar, but it’s not always possible. A 50/50 mixture of vinegar and water or cleaning should be used when performing this.

Allow the solution to soak into the pillows for a few minutes before using. Remove the solution from the pillows with a clean white cloth until the surface feels dry.

Cleaning Spills

Immediately press a clean white towel or soft cleaning cloth on the spill to absorb up any liquid that may have gotten on your pillows. After that, make an effort to completely dry your pillows to prevent the growth of mold.

Put them in the sun if it’s warm and sunny outside, or relocate them to a room with better air flow and set up a fan nearby if it’s cooler.

Removing Stains

Because of the difficulty of stain removal and the potential for damage, it’s important to use extreme caution when cleaning Tempur Pedic pillows.

Clean white towels or cotton cloths soaked in a solution of mild detergent and cold water will remove the stains without hurting your cushions.

Using circular motions, carefully wipe the towel or rag against the cushion surface to remove excess water. If required, repeat the procedure numerous times until all stains have been removed.

Once the stains have been removed, either place the pillows outside in the sun or in a well-ventilated room, or use a fan to help them dry.

For more information on Tempur Pedic pillows, see our pillow reviews.

How to Clean, Wash, and Sanitize a Tempurpedic Pillow – Step-by-Step

Cleaning your tempurpedic pillow is a smart option if you want to keep your sleeping area germ-free and fresh-smelling. Cleaning a tempurpedic pillow incorrectly, on the other hand, could result in damage to your pillow. Using this proven approach, you can clean your tempurpedic cushion to its full potential.. Memory foam can also be used in this guide.

Follow these instructions to wash and sanitize a tempurpedic pillow:

The Tempurpedic cover should be washed and dried before beginning.

The pillow should be aired out.

Step 3: Use a safe chemical to eliminate the pillow’s scents.

Remove stains and spills using a cloth.

You should never wash a tempurpedic cushion in the washing machine, according to tempurpedic. Temporpedic material is a breeding ground for bacteria and mildew when it gets wet.

Associated content:

An advanced neck-relief pillow from TEMPUR-Ergo. Amazon has the item. Choosing the proper tempurpedic neck pillow size may be of interest to you.

Steps to Clean a Tempurpedic Pillow

Step 1. Wash the Tempurpedic Pillow Cover

You can use a washing machine at this point, but only if you want to. Check the label to determine whether there are any restrictions, such as the use of only cold water. You should wash your pillow with cold water and a mild detergent because you will be sleeping on it. If you have sensitive skin or are concerned about the material of your pillow cover being damaged, avoid using harsh chemicals like chlorine. The cover can be dried like any other piece of clothing when the cycle is complete.

TEMPUR-Neck Pillow | Tempur-Pedic

Step 2. Ventilate the Tempurpedic Pillow

It’s best to keep it in a clean, well-ventilated environment and gently roll it with your hands. To preserve the memory foam in the pillow, do not put it in the dryer. Avoid rubbing or twisting the sensitive material, which will reduce the benefits of the Visco foam’s increased density and malleability.

Step 3. Remove Odors From the Tempurpedic Pillow With a Safe Chemical Cleaner

The foam in the pillow can be damaged if you use harsh chemicals on the cover. Sprinkle baking soda on the foam and let it sit for a day to get rid of the scent. Don’t use any water, and after 24 hours, use an upholstery attachment to vacuum the pillow clean. The head on this attachment is smaller than the one used to clean carpets. A tempurpedic pillow can be cleaned with baking soda.

Suppose the pillow has a terrible smell since it was exposed to some kind of liquid. Pour half water and half vinegar into a spray bottle and shake well. Apply a little mist to the pillow. Dry it with a towel once it has soaked for 3-4 minutes. If you don’t completely dry the pillow, mold growth is a possibility.

Step 4. Use a Towel to Remove Spills and Stains

Mold can grow within a cushion if spills and stains are not removed quickly enough. Remove the pillow from its case as soon as possible and pat it dry with a towel. After that, store it somewhere dry and well-ventilated. When drying a pillow, if necessary, use a fan.

Stained pillows can be cleaned by dabbing a tiny amount of a mild detergent with a cloth filled with cold water. After that, dry the pillow with a towel to remove any remaining moisture.

Machine Washing vs. Hand Washing Tempurpedic Pillows

TEMPUR should never be exposed to water. This means that you shouldn’t wash your tempurpedic pillow by hand or machine. Follow the instructions in the preceding section instead. When it comes to cleaning your tempurpedic cushion, a moist cloth will do the trick. It’s important to dry your tempurpedic pillow as soon as possible if it does become damp.

What If I Washed My Tempurpedic Pillow? How do I Dry a Tempurpedic Pillow?

Steps to drying a tempurpedic pillow:

Step 1: Take off and set aside the protective cover of the camera.

Step 2: Gently roll and press the tempurpedic pillow.

Next, make sure that the pillow is in a well-ventilated place.

Make sure there is no dampness in the pillow. Repeat steps 2 and 3 if wetness persists.

Damage will be done to the foam substance by washing a tempurpedic cushion. If your pillow gets wet, it will expand, distort, and eventually disintegrate, leaving you with a pillow that is no longer comfy to sleep on because of the ruined foam within. Fortunately, the damage can be reduced or reversed.

Because the tempurpedic pillow’s very fine foam constantly expands and distorts, washing it will result in damage. This process can be reversed by employing towels to remove excess moisture. Use as little pressure as possible and, if the pillow is wet, place it in an open, ventilated area with a few towels around it. After wringing the towel out and replacing it with a new, dry one, it is time to switch out the towels. The pillow should be rolled and pressed to eliminate any remaining moisture after it is no longer soggy. After that, let it air dry in a sunny, well-ventilated area until all moisture has been removed.

In general, a reasonable rule of thumb for drying memory foam is 24 hours. To prevent mildew from forming in the early hours of the morning, bring the pillow inside for the night. In temperate climes, there are only 12 hours of drying time each day, so 24 hours of drying will take two days to complete in those areas.

Associated content:

  • To make a tempurpedic mattress softer, how do you extend it?

Tempurpedic pillows can be used in any position while sleeping. Image courtesy of Amazon.com.

How to Clean a Tempurpedic Mattress

If you want to clean a tempurpedic mattress, follow the same procedure as you would for a pillow. If the scent persists, sprinkle baking soda over the mattress and let it sit for an hour before vacuuming it up.

Tempurpedic mattress cleaning:

Step 1: Take off the mattress cover and wash and dry it.

Next, sprinkle baking soda over the mattress and let it sit for an hour.

The mattress should now be vacuumed.

Step 1. Remove, Wash and Dry the Tempurpedic Mattress Cover

Remove the mattress cover in its entirety. The more you use your mattress, the longer it will last if you don’t have one. An Amazon-purchased waterproof mattress cover will come in handy.

The washing instructions are printed on the cover tag of the garment. If there are no instructions, wash it in cold water on a delicate cycle in the washing machine. The cover should be washed on a hard cold cycle if it’s made of heavy-duty material and there are no care recommendations.

Dry the mattress cover on a low setting in a dryer. However, air drying is preferable since it eliminates the risk of lint accumulating on the cover during the drying process.

Step 2. Sprinkle the Tempurpedic Mattress With Baking Soda and Leave for an Hour.

A little layer of baking soda applied to the entire mattress should do the trick. This will remove odor-causing residues and excess moisture. Cornstarch, on the other hand, may be useful. Half cornstarch, half baking soda should be used. A tempurpedic mattress can be cleaned using baking soda.

Step 3. Vacuum the Mattress

Vacuum with an upholstery attachment or a handheld vacuum after an hour. Vacuum the baking soda completely before stopping.

And that’s it! Your Tempurpedic mattress has been thoroughly cleaned and is free of any unpleasant odors.

How to Remove Urine From Tempurpedic Foam Mattress

How to clean a tempurpedic mattress of urine:

Remove as much water as possible with towels.

A spray bottle with half water and half vinegar should be used to clean the mattress.

Towel off any remaining dampness.

Step 4: Spray and towel until the scent is almost completely eliminated.

Step 5: To avoid lingering odors, pat the foam dry with a towel before applying baking soda to the area.

Step 6: Depending on how deep the stain is, give it an hour or more to dry.

Step 7: Use a portable vacuum or a vacuum with an upholstery attachment to remove the baking soda.

In order to prevent this from happening again, it’s best to cover the mattress with a mattress protector.

A waterproof mattress cover, such as this one from Amazon, would be a wise purchase if you don’t already have one.

How to Clean a Tempurpedic Mattress Topper

It is important to keep tempurpedic mattress toppers dry like all other tempurpedic products.

Follow these instructions to clean a tempurpedic mattress topper:

Step 1: Use a brush attachment on a handheld vacuum.

Step 2. Spray the mattress with a safe cleaning fluid.

Step 3: Use a safe cleaning solution to saturate the mattress.

How to Remove Smoke Smell From Tempurpedic Foam

Smoking has the unfortunate side effect of reducing the amount of time that foam can be used without developing an overpowering odor. This is a good thing because tempurpedic mattress coverings and pillows can be cleaned to remove the smell.

To make a tempurpedic foam product smoke-free:

Step 1: Take off the cover and wash it in a cold water washing machine.

Air out the mattress, topper, or pillow in a well-ventilated area to remove any moisture.

Step 3: Spray the mattress, topper, or pillow with a safe cleanser and let it sit for a few minutes before vacuuming.

Afterward, let the baking soda soak in for one to twenty-four hours on the mattress, topper, or pillow.

Step 5: Using a handheld vacuum or an upholstery attachment, remove the baking soda from the carpet.

This step is optional, however it’s recommended if you’re not satisfied with the outcomes.

Associated content:

  • How long are tempurpedic pillows and mattresses made to last for?

How to Remove Sweat From Tempurpedic Foam

Covers are the greatest way to keep sweat from entering foam mattresses. Simple pillowcases from Amazon, like this one, will do the trick. However, if you find that your tempurpedic mattress or pillow is soaked in sweat, you can follow the same steps as eradicating smoke. You’ll need to think about introducing a scent that will disguise the perspiration stench because it’s stronger. In order to speed up the drying process, apply essential oils to the pillow before putting it in the dryer. While lavender oil has been hailed as a natural sleep aid, you can go for any moderate fragrance that will make you feel at ease and mask unpleasant aromas.

2022 Tempur-Pedic Pillow Reviews: Which Is Best

The comfort of a Tempurpedic mattress has won numerous accolades. Image courtesy of Amazon.com.

Spot Cleaning Memory Foam

Spot cleaning your tempurpedic mattress, topper, or pillow on a regular basis will help keep it in good condition. Dropper bottles of hydrogen peroxide, which contain 3 percent by volume, are ideal for this task since they allow you to precisely target the chemical’s application. Spot cleaning is as simple as the following:

  1. Spot clean a certain section of your home. Perhaps there is a lingering odor that has to be dealt with.
  2. Simply dab on a few drops of hydrogen peroxide where you’d like it to work its magic.
  3. Towel off the sweat.
  4. Re-towel the area to remove any remaining wetness. To remove the hydrogen peroxide, do this.
  5. Scrub spots using a mixture of boric acid and vinegar on soft cloths.
  6. To get rid of the cleaning solution, wet a cloth and blot it dry.

Which Stain Cleaners Should I Use?

In order to avoid damaging the memory foam in your tempurpedic mattresses and pillows, never use strong chemicals to clean them. The qualities of the substances you should utilize are listed below.

Vinegar and Water

A solution of half vinegar and half water can be used to remove pee stains. Instead of purchasing a product developed for the purpose, you will need to locate an empty spray bottle.

Boric Acid

Like vinegar, boric acid has a strong acidic taste. In contrast, boric acid is a disinfectant that can be purchased in either a liquid or powdered form. As a detergent, boric acid and vinegar are an excellent combination. From Amazon, here’s some boric acid cleaning.

Hydrogen Peroxide

Acidity isn’t something hydrogen peroxide has. Because it’s a base, it can be used to remove urine’s acidic residue. A white stain will appear on the mattress as a result of this method. After using hydrogen peroxide, it’s a good idea to flush the hydrogen peroxide out of your system with a little water. Here’s a peroxide cleanser from Amazon that’s easy to use.

Enzymatic Pet Stain Cleaner

The ammonia residue left behind by pet pee necessitates the use of a disinfectant containing bacteria. Nature’s Miracle’s enzymatic cleaner is excellent for cleaning pee.

If you can’t save your tempurpedic pillow or mattress any longer, it’s time to buy a new one.

Check out our article on how to make a bed smell good if you’re seeking for more cleaning advice.