Updated at: 28-09-2022 - By: Sienna Lewis

Natural, comfortable warmth may be added to every room of the house by simply hanging door curtains. It doesn’t matter if it’s hung in front of an internal door or a set of French doors that open to the outside.

The light-blocking textiles of these window coverings prevent damaging UV rays from entering the inside while at the same time returning heat back toward the occupants within. You’ll discover how to manufacture door curtains in this tutorial.

You’ll need the following items to proceed.

  • Stitching device and/needle
  • The Material of the Drapes
  • With a pole
  • Threads of the same color
  • Hardware to hang things on.

Measurement is the first stage in the process of making door curtains. To begin, mount the bracket to a wall at the desired height and use it to take measurements for your curtains. Next, determine the width of your door and the desired “drop” from the rod’s top to the bottom.

A single piece of fabric should be used for the curtain’s top and bottom hems, adding 6cm for the top and 7cm for bottom hems, respectively. In total, you should add 14 centimeters when cutting each side’s length- this will give an even drape that falls without any wrinkles or bunches in front of your window.

Fold each side by 7cm and press the edges to finish them. To keep your threads straight, fold in about an inch or two of cloth at a time before stitching and removing pins one at a time.

Cutting is the fourth and last phase in the process of making door curtains. Cutting the channel for your curtain rod:

  1. Take a measurement of the area that needs to be filled to make it all fit.
  2. In addition, add 6cm and then push down those dimensions with an iron before doubling them by 2cm.
  3. In order to avoid cumbersome curtains while the curtains are open, pin the fabric together and sew on top of it at 1mm from where you folded under.

You’ll need to lift and pull away the brackets from the wall in order to complete Step #5. Take a pole and thread one end through each upper window or door frame opening.

Then, place this above the desired location for hanging your curtains, leaving enough space for both the top and bottom of the curtains to hang freely. It will be a breeze to attach each bracket to its appropriate hook after the process is complete!

Amazon.com: JINCHAN Linen Textured French Door Panel Curtains 72 Inches Long French Door Curtains Sheer French Door Panels and a Bonus Tieback Brown 1 Panel : Home & Kitchen

Using a pair of scissors, cut the curtains loose from their poles. It’s best to pin them by folding 2 centimeters over at the bottom so that there are no obvious seams on the curtain before sewing.

The final step in the process of making door curtains is now complete. The curtain must be hung back on the pole after it has been completed. Make an upward and downward turn, and then pin it down with a miter cut for aesthetic purposes.

Blind-stitch the hem by hand or with a machine until all the pins are removed, then remove them one by one. Do it all over again after you’re done!

How Many Yards do I Need to Make a Door Curtain?

Using any fabric for curtains is a wonderful feature, as the options are nearly unlimited. In order to accommodate fullness on both sides of the window, you should always build a new curtain with 212 times the width of your heading (depending on how wide you want the headings).

1 12 yards can be used instead if this is not achievable owing to dimension constraints or material thickness limitations

How do I Hang a Curtain on a Door?

With a sidelight window in a foyer, it’s impossible to figure out how to hang curtains. The hardware for the curtain rod should reach 1 foot beyond the doorway to allow for two fabric panels on each side of the door.

When opening or shutting, the first panel should press to the right, exposing one side of the entry while keeping the other panel closed at all times!

What are Door Curtains Called?

Portière is the name given to the door curtain. Using a portière is a simple technique to divide a room from the rest of the house. The word “porte” derives from the French. This type of portiere is frequently used in open floor designs because of its dual purpose of providing privacy and light control while minimizing the amount of space taken up by obstructions.

What are Alternatives for Door Curtains?

The roman blinds

Roman blinds’ timeless appeal is without a doubt an excellent decision. With the addition of thermal lining and luxury fabrics at a fraction of the cost, they become energy efficient as well!

The Matchstick blinds

The atmosphere created by this form of in-home care is one of serenity and comfort. Texture and warmth may be added to any design scheme with their use, but they look their best when paired with neutrals.

Those who prefer softer color palettes in their area or those who want some seclusion from outside bystanders can benefit from this form of window covering, which filters the light brilliantly by making it more diffused.

The Café curtains

A Café Curtain is a great method to give your space some much-needed seclusion. If you want both types of window treatments, you can use it with traditional curtains, but there are some drawbacks to that as well.

Amazon.com: Topick Sheer Door Curtain with Leaf Embroidered Design for Sliding Glass Door French Door Curtain Rod Pocket 1 Panel 72 Inch Long Charcoal Grey : Home & Kitchen

If you have windows that need light, but you can’t bear too much exposure throughout the day, these café curtains are a great answer for you. They filter out extra sunlight without obstructing outside visibility or substantially altering how bright your home seems.


In order to determine how much of the doorway will be covered, you’ll need to know its width. Since the curtain will not be used as a traditional window covering, the width of the trim is not necessary.

Take a look at your doorway’s dimensions. Hang the curtain above the trim or use a tension rod that will be inserted in the door opening. Make your decision now. The finished height should be taken into consideration.

With a chalk mark, indicate the fabric width you desire for cutting. Unless you want a particularly full look, “Real Simple” magazine suggests constructing a window curtain 2 to 2 1/2 times the width of the window for suitable fullness. To allow for hemming, add 1 inch to each cut edge. If you want to construct two curtains instead of one, you will need to determine the desired width, divide it in half, and then add 1/2 inch to each side edge of each curtain.

Using chalk, mark the length of your fabric. Rod pockets and headers require six inches of additional fabric; the hem on the bottom requires four to six inches of additional fabric as well.. If the diameter of your curtain rod is greater than 1 inch, you should increase the pocket size. It’s best to double the diameter of your rod, plus 1 inch for the header, and then double that amount for the top pocket length.

Use the chalked lines to guide you as you cut your fabric. Iron the fabric until it is completely wrinkle-free.


Make sure that the fabric is laid out with the wrong side facing outwards.

Both long sides should be folded up a half-inch so that they are facing the right way up. Use iron to secure the object.

In order to hide the cut side and leave only a half-inch of the right side of the cloth visible, continue folding the turned edges in the same way for a further half-inch. Place using an iron and a pin.

Sew the fabric along the folded hem edge closest to the curtain’s center in a straight line. The seam should be backstitched at both ends. If you’re making a pair of curtains, you’ll want to repeat the process for the other long edge as well. Trim the thread ends.

Create a three-inch hem by folding the top portion of your curtain fabric. To hide the cut edge, add a second fold of 3 inches to the bottom of the first fold. Place using an iron and a pin.

The folded edge of the curtain closest to the middle is the best place to sew the top pocket.

Using chalk, draw a line 1 inch down from top of the curtain across the width of the curtain. The curtain’s header and rod pocket are made by sewing along the chalked line. Trim the threads at both ends of the seam. It’s possible to skip this step if you don’t like the ruffled look of a header.

Depending on how much seam allowance you calculated, you can either add two or three inches to the bottom of the curtain. To hide the cut edge, iron it in place, then fold it another two or three inches. Place using an iron and a pin.

Sew the curtain’s bottom hem along the folded edge that is closest to the curtain’s center. Trim the thread ends after backstitching the seam on both ends.

How to Make Sheer Curtains For French Doors - Krostrade

Make sure all thread ends are trimmed and ironed before hanging the curtain.

Install the curtain rod and the completed curtain.


So you’ve made it to the end of this article, and I’m confident that it has broadened your understanding of door curtain making. You’ll see that they’re not difficult at all.

Anyone can make door curtains, and it doesn’t require any prior skill. You’ll be ready to travel in no time if you follow the instructions here.