If you’ve ever wanted to learn how to make a king-sized pillow cover, you’re in luck. These pillows are guaranteed to leave a lasting impression.
Pillow shams serve the same purpose as traditional pillowcases. It’s popular because it protects your pillows, but it also enhances the look of your bed or room’s dcor at the same time.
When you’re sleeping, you can put them behind your regular pillows. Alternatively, you might get a set of coordinating shams for your duvet coverlet. They could also be utilized as a means of support for those who prefer to sit on the edge of their beds. For these reasons, shams are the best option.
Things You’ll Need:
- Machines for sewing
What are the Benefits of Using a Pillow Sham?
Use of pillow shams has numerous advantages. This is good news for you. So, let’s have a look at these things:
It keeps your bedding fresh and clean
Having to launder your complete bedding set every day is the last thing you want to do. You will, however, end up getting your sheets soiled if you sweat, rub creams, or shed some dust into them as you sleep.
This is likely to result in ugly stains on your bed linens. Until you wash your bedding, you can hide these unattractive stains with a pillow sham.
It creates a new look and feel to your bedroom
Even if you’ve always wanted an updated design for your room, you don’t have to fork over the money to do it by purchasing new bedding. To make your bedroom look cozier and more peaceful, all you need to do is add a few of these to your decor. A decorator is no longer necessary!
Your Guide on How to Make a King-size Pillow Sham
Decorative shams were designed to enhance the look of your bedding. Standard shams measure 26 inches by 20 inches, whereas Euro shams measure 26 inches by 26 inches, and King shams measure 36 inches by 20 inches.
Make a pillow sham if you want to get into the habit of producing your own home decor. For starters, it’s not that difficult. Remember that shams can be used in a variety of ways to dress up your bed pillows.
It’s a good idea to sketch out a plan before you start working on the project to make sure everything goes according to plan. Make your own king-sized sham by following these simple instructions.
Step 1: Double-check your pillow’s exact measurements
Make sure your pillow’s dimensions are correct by measuring it twice. Use a rigid tape measure instead (a firm one is more accurate). In order to get an accurate measurement, place the pillow on a flat surface and then measure it from side to side.
Step 2: Cut the fabric based on your desired fit
Before you begin sewing, make sure the cloth is ready. Your pillow’s measurements should be taken into consideration. A flange of three to four inches should be included, as should an additional inch for seam allowance. The front piece is usually 41″ x 25″ and the two rear pieces are 25″ x 25″ in size.
Step 3: Serge or overcast the fabric’s edges
Start serging or overcasting your cloth’s edges once the pieces have been prepped. You might also try hemming your two back pieces on one side. The hem should be approximately 14 inch from the side.
Step 4: Layer the front piece and put the back pieces together
Layering the front piece is the next stage, and it is imperative that the correct side is always on top. The final edges of the two back panels should be overlapped slightly. The right side should be facing down on these components.
Step 5: Sew the whole perimeter
Sew along the whole perimeter of the front and back parts once they’ve been pinned together. You must ensure that all of the components fit together perfectly. In order to prevent the pillow from slipping out of its place during the sewing process, start in the middle and use two rows of double stitches.
Step 6: Measure and mark the seams
Measure 2.25 inches from each seam and mark it around the entire piece. Sewing takes place here. Before you complete the sewing, make sure the pillow fits inside the closure.
Step 7: Trim the excess fabric and press each seam
Trim or clip the tips of the excess fabric off each corner (leaving approximately 1/8 inch of fabric), then flip it over so the right side is facing out. Make sure to press all of the seams for a neater, more pointed appearance.
Step 8: Insert the pillow into the sham
Reach into the back opening and push against each of the four corners to poke them out. Insert one half of your pillow into the top flap of the pillow sham after it has been turned backwards. Pull the other flap out to insert the other half of your cushion. Afterwards, push it down.
Step 9: Starch your sham if you want stiffer borders
Prior to putting your pillow, you may want to starch your shams to give them a more rigid outside border. You might also iron all of the sham’s edges to a smooth finish. Both ways, the hoax appears more convincing.
How to Make a King Size Pillow Sham
Web Minesweeper – Play Free Minesweeper online
Replace the covers on your old pillows if you’ve become weary of their appearance. Make your own instead of shelling out for new ones. You’ll be able to choose your own cloth and not be constrained by the store’s selection. If you can stitch a straight line, you can make king-sized pillow shams with ease. All you’ll need to get started is a sewing machine and some fabric. Make your own king-sized pillow shams with the help of the following instructions.
Making Your Own Pillow Shams
If you’re making shams for a king-sized pillow, make sure to take these measurements. 28 by 20 inches is the typical size of a king-sized pillow. A few more inches should be allotted if you want to add an extra edge of material to the sides. Allow an extra inch on each side if you’re making a fitted sham to accommodate the seams.
Shop for the material you wish to use at a store that sells it. Most fabric stores should have whatever pattern or type of fabric you’re looking for. Pillow shams are most commonly made from cotton-based textiles. Cotton is a durable fabric that’s easy to sew with because of how well it holds up to use and washing. Don’t forget to purchase matching thread to your chosen cloth! More fabric is always preferable to being short on something you really need.
To make the sham fit, cut the top half of it to the correct size. For king-sized pillows, you’ll need a piece of fabric that measures 31″ x 22″ if you want to make a cover. Cut the cloth for the sham’s backside into two parts. You’ll want to leave one part longer than the other by two inches. As a result, you’d have two pieces measuring 15.5 inches wide by 22 inches long. This will be the portion that covers the opening where the pillow goes into the back opening of the sofa.
Sew a finished hem around the raw edge of the middle section of the fabric for the sham’s back. Lay the rear edges of the sham on top of the front piece. Keep the right sides facing each other to avoid any confusion. Allowing for a slight overlap, align the fabric’s outer edges and place one of the longer back pieces on top of the shorter one. Pin in place with a needle.
Make a seam all the way around the sham. Afterwards, you should have a large square that is sewn together, with an opening in the back center. Right-side out the king-sized sham. Using the rear aperture, insert the pillow. There is a new pillow sham for you now.
If you want the sham to have a flap that extends beyond the edge by several inches, follow these steps. Make your top piece of material 34′′ x 25′′. Your bottom pieces will measure 17′′ x 25′′ and 19′′ x 25′′, respectively. Turn the sham right side out after sewing all the way around it. Sew another seam on the outside of the sham, leaving enough room for the cushion to fit. The sham’s edge should have a flap of material that extends several inches in all directions. Insert the cushion through the opening on the back.
As an alternative, you can sew whatever kind of decorative border you like along the edge of the pillowcase. This sewing pattern can be used to make pillows of any size; the only difference will be the pillow’s dimensions.
The Bottom Line
A king-size pillow sham is a terrific concept for a better bedding arrangement, and you should know how to make one. You can’t go wrong if you incorporate these elements into your bed’s overall design.