Sheer window curtains dress up your French door’s window panels while also keeping you hidden from prying eyes. In addition to softening the entrance, you can choose panels in a hue that matches the rest of the room’s design. Because of the sheerness of the material, light can pass through easily, allowing you to see outside. Use sash rods to fix the curtain panels at the top and bottom of the door instead of allowing them to sway freely.
What are French Doors?
To begin, let’s take a look at what French doors are and why they exist.
There are many types of French doors, but the most common is a single door or a pair of doors that are mostly constructed of glass. In terms of efficiency and functionality, these doors are ideal. French doors, when properly constructed and insulated, are equally as effective at insulating a home from the elements as solid doors.
Should You Hang Curtains On French Doors?
French doors are adored by many people because of their wide-open appearance and openness to the outside world. French doors, on the other hand, don’t provide much seclusion. It’s always a good idea to have curtains on French doors so that you may choose whether or not to show them off to the public.
Because of these issues, putting curtains on French doors isn’t always the best option for maintaining privacy and fine-tuning the amount of light coming in.
How to Hang Curtains On French Doors: Tips and Considerations
When shopping for curtains for your French doors, keep these guidelines in mind:
Over your French doors, USE FULL-LENGTH CURTAINS. Curtains should reach the floor if you want to provide maximum covering.
DO NOT scrimp on the width of the curtain. When the doors are closed, make sure the curtains completely cover them. Fullness is determined by the look you’re going for.
How to figure out the size of a French door’s curtains?
- Two times the width of the window is the standard curtain fullness.
- Two-and-a-half times the width of the window.
- Three times the width of the window is the maximum curtain fullness.
The width of your window should never be the exact width of your curtain rod (like a 45-inch window with a 45-inch curtain). There will be a lack of window coverage, and closing the curtains provides a harsh, unfinished look.
Choosing grommet or tab top curtains is a good idea because you’ll be opening and closing the curtains a lot.
Make sure your curtain rod isn’t too long. To avoid obstructing your doors, make sure the curtain rods are long enough.
If you have a lot of French doors in your home, you’ll need a long curtain rod and a wide panel to cover them all.
It is most typical to see the following styles of French doors:
a single or two-door French door that stands alone
Make sure each door is completely covered by curtain rods and curtains (see width guidelines above).
near to one other, a pair of French doors
To cover a large number of French doors, use a curtain rod that spans the entire width of the openings.
Curtains will be hung to the side and must be wide enough to cover all of the windows when they are shut.
An extra-long curtain rod is also required. Use center curtain rod support brackets for extra support when utilizing lengthy curtain rods.
A wall separating a pair of French doors
Consider each French door to be a window on its own. For each door, install curtain rods and curtains that function separately.
How to Measure Curtains for French Doors
The process of measuring and hanging curtains on French doors is very similar to the process of doing so on normal windows.
How to Measure for Curtains the Right Way has helpful hints on how to accurately and precisely measure curtains for French doors.
We understand that hanging curtains the old-fashioned way can be time-consuming and frustrating. To hang curtains that are stable and perfectly aligned, numerous people and countless re-dos are often required.
Fortunately, Kwik-curtain Hang’s rod brackets make hanging curtains a breeze. You don’t need to take any measurements to fit the brackets to your French door’s trim.
Learn more about Kwik-proprietary Hang’s technology by watching it in action.
4 French Door Curtain Ideas
Curtains for your French doors? Here are a few options to get you started. Use these ideas to get your creative juices flowing.
French doors with tiebacks for the curtains
When you want to show off the elegance of your French doors while keeping your curtains in place, use holdbacks or tie backs.
Doors with blinds and curtains in the French style
Make a striking visual impact by combining shades and drapes. While keeping the drapes open, you can utilize shades to block out light while still adding a decorative touch.
In addition, there are French doors that have curtains and sheers installed.
Layering sheers and curtains in a bedroom or living room creates an attractive look. Light can still be let in through the closed sheers.
Pro tip: Use Kwik-double Hang’s curtain rod brackets to quickly layer drapes.
French doors with sheers in the middle of the frame.
This style is perfect for double French doors! Single sheers can be hung between each door to create a light and airy effect.
How to Hang Curtains on French Doors Without Drilling Holes
Kwik-no-drill Hang’s curtain rod brackets and holdbacks are ideal for hanging curtains on French doors without causing any damage.
Using Kwik-revolutionary Hang’s curtain-hanging system has transformed the process, turning a time-consuming bother into an easy installation. You don’t have to drill or measure anything; all you have to do is set the brackets on the French door trim and tap them into place.
Using Kwik-Hang, you can hang drapes on French doors without drilling, nails, or screws at a reasonable price. It’s never too late to give Kwik-Hang a try!
Using 3M Command Hooks
Command Hooks have a wide range of applications, from displaying artworks, hanging keys, and mounting IT equipment on the wall, to securing a laptop to the wall.
Curtain rail supports can be made from the same simple hooks you use for basic adhesive chores to hang curtains, just to name a few of their many possible applications.
How To Use 3M Command Hooks For Your Curtains
- Check to see if you have two Command Hooks in your home. You’ll need two Command Hooks to get started (Or, if your window is more comprehensive than 30 inches, a third Command Hook will be needed to place halfway along).
- Take the curtains’ measurements. Pull back the adhesive cover on Command Hooks once you’ve measured your curtains. For at least 30 seconds, press each one against the surface and hold it there.
- Wait for a few minutes after you’ve applied the hooks so they can properly set. Hang your curtains after 30 minutes of letting the hooks “set.”
Command Hooks can only support a maximum weight of 5 pounds. It’s a given that they won’t be able to handle drapes or heavy curtains. As a result, they can’t resist the wrath of children or pets (especially cats with a penchant for curtain climbing). Even if you reattach them after they’ve come loose, their adhesive strength will deteriorate over time. In other words, they are not the most long-term option.
Command Hook Sizes And Styles
Choose from brushed nickel or oil-rubbed bronze to match your existing decor or create a completely new appearance with Command Hooks. Small, medium, and large metal Command Hooks are all readily accessible.
It is best to go with a large window treatment because the curtain rail needs to be able to fit comfortably within. A Command Hook will not be able to accommodate a rod that is more than 3/8 of an inch thick.
Alternative Ways To Hang Your Curtains Without Drilling
If you don’t want to drill any holes in your curtain, use one of these other methods. Because the optimal way is just the one that best suits your preferences, there is no single “best” method.
Kwik-Hang Curtain Rod Brackets
There are two major hurdles to overcome when selecting to hang curtains: correct measurements and preventing wall damage. Both of these chores are made much easier with Kwik-Hang curtain rod brackets. In addition to being quick and easy to install thanks to their groundbreaking design that doesn’t require any measurements, they also don’t damage your walls.
With a rubber mallet or hammer, all you have to do is insert the brackets at the corners of your window frame, and you’re done! Damage or drilling isn’t necessary. Almost no effort is required to arrange your curtains.
Coat hooks may not be the first thing that comes to mind when thinking of ways to hang curtains, but they’re surprisingly flexible and affordable.
Coat hooks have the advantages of being quicker and less expensive to install than typical curtain rails, as well as not requiring any drilling. In terms of disadvantages, precise measurements are required. In addition, the curtains are cumbersome to open and close, therefore they’re best suited for windows that don’t require frequent adjustments.
Place the coat hooks along the top of the window, spaced evenly apart. Each hook should be looped through the top of the curtains to ensure an even drape.
Tension Rod Curtains
Tension rods run from one side of a window frame to the other inside the frame. Shower curtains commonly hang from rods of this type. They’re a terrific solution because they merely take a few minutes to install and don’t require any precise measurements or preparation.
Other than hanging them at the top of a window or lower down for a rustic look, they don’t give many design alternatives (which can also be useful for increasing privacy).
With light, sheer textiles, they’re ideal; with heavier drapes or blackouts, they’re not. There will also be a loss of tension in larger windows, even if you can buy custom sizes.
Hang Curtains Without Wall Damage
The damage-free curtain rod brackets from Kwik-Hangs are the most easiest and fastest solution to hang curtains without damaging walls that we could find (and holdbacks). In the end, this is the best option.
Kwik-no-drill Hang’s hardware comes in a number of colors. If your curtain rails are longer than 30 inches, you can also use center support brackets.
Additionally, because Kwik-Hang brackets can take up to 20 pounds of weight, you won’t have to worry about your window treatment collapsing if you use standard curtain rods or heavier drapes.
To hang drapes on French doors without drilling is a common desire for many people. For example, if you don’t want to harm your beautiful door by drilling holes, the best solution is to choose a method that doesn’t require holes.
It’s not necessary to drill a hole in the door to secure the rod; there are a variety of other options available. Drill-free curtain hanging won’t mean compromising on either stability or aesthetics. As a result, there are no drawbacks to using this approach. Plus, it’s a simple activity that you and your children can work on together.
- For 3 Windows Side By Side, Curtain Ideas.
- Roman Shades for French Doors
- How to Hang Two Curtains Without Using Two Rods?
Heather is a self-confessed DIY fanatic who enjoys writing. She’s learned a lot about home improvement and design over the course of her life, and she wants to share her knowledge with you. In her spare time, she enjoys hiking and finding new DIY projects to try.
It’s no longer just a place to park your car; garages now serve a variety of functions. It can be used as a workshop, a storage space, or even an additional bedroom. The frequent visits, though, can be a problem.