That these traditional and low-cost bent metal strips would be employed in the production of high-end curtains is a surprise to me. With a pin hook, you may hang pocket rod curtains in your living room and change it into a stylish place.
Using a pocket rod and curtain hooks, you may hang your curtains the old-fashioned way. Curtain pin hook, snap-open shower curtain rings and a ruler and fabric marker are all you need to make a shower curtain and pocket.
Using the supplies, all you have to do is adhere or fasten it to the wall. Your pin should connect at the back of the fabric, not at the front. Once you’ve hung the curtain, attach the opposite end of the pin hooks to the curtain rings and you’re all set.
Pocket rod curtains
As a conventional and time-honored manner of hanging a curtain, the rod pocket is a popular choice. When utilizing pocket rods to hang curtains, the fabric itself is usually stitched with pockets for the rods. You next hang the pocket rod by securing it to the rod and adjusting it to your preference.
To open and close your drapes, slipped-on curtains with pocket rods can be a bit of a pain. Pin hooks may be a better option for you if you frequently open and close the door.
Traditionalists who prefer the look of sewn-in grommets rather than drapery pin hooks are a big fan of the drapery pin hook. The sleek and sophisticated style that many homeowners and interior designers desire may still be achieved by adhering to classic methods of curtain hanging, which are just as effective as the more modern ones.
These hooks have been used for a long time in the fishing industry. Customers know that these drapery pin hooks will endure a long time and accomplish their duty without ruining your curtains. You can open and close the drapes as you wish because the curtain is secure and moveable.
All of your supplies are now ready, including a curtain pin hook, rings, a ruler and fabric marker, so let’s get started!
Step 1: Lining the curtain
Line the top of the curtain so that the fabric’s backside is facing you at all times. Use pleater tape at the top edge if that works for you. You can use it to make adjustments to your rod-pocket panel setup. To make pocket tapes, you stitch one-inch-wide vertical pockets onto the fabric. Allows the pin hook to glide into the upper pocket with ease.
Step 2: Measure the intervals.
As soon as you have your drapes or a curtain in place, grab a marker and a ruler to start the timer. Setting a numerical gap between each hook attachment is preferable. There’s a risk that it could get untidy and messy otherwise.
You should also make sure that your marks are even and consistent throughout. Ensure that the placements are not too low or high on the curtain’s hem.
This step is unnecessary if you used pocket tapes instead of pleater tape. Finally, we may move on to the next phase.
Step 3: Attaching the hooks
You’ve come to the right place if you’re looking for pleated curtains. Pin hooks should be attached at the prescribed intervals. You can distribute the prongs on vertical pockets by placing them on each other pocket tape instead of all at once. Skip the two pockets if you want loose-looking pleats.
To keep your drapery pin hook in place, tuck the pointed end under a generous amount of cloth before pinning it in place. Make a concerted effort to coat the entire pin hook. Take care not to rupture the material’s front lining when using the straight edge to cut through its back lining. Utilize the curtain’s backside to keep it secure and hidden.
Step 4: Curtain rings
Make sure all of your hooks are in place and that nothing is hanging free. When you have all of your fabric gathered, start by attaching the pin hooks to the curtain rings. The hook should be visible at the back line of the cloth if you followed the third step correctly.
Gently slip your curtain rings onto the pocket rod after attaching the hooks to the rings. The diameter of the pin hooks should be taken into account. For a half-inch set below the top of your curtain, long-neck pin hooks are the way to go. The traverse rod can be hidden by using a short-neck pin hook.
Step 5: Hang your rod
We’ve got the hooks and rings in place now. Attaching the last will complete the job of securing the rod. Set the rods carefully on the curtain brackets after they have been lifted. Adjust the rod’s location so that it rests squarely in the middle and isn’t leaning toward either of the edges.
Your pin hooks can be used with a variety of pleating tapes, depending on your preference. Before you apply the pleater tape, take some time to decide on the look you want to achieve. You can use a variety of pleating techniques, such as loose, tight, and even reverse pleats. With any luck, you’ve now mastered the fundamentals of using a pin hook to hang pocket rod curtains.
Make sure you mark your curtains correctly and follow the directions to achieve a stunning drape over your window.