Updated at: 31-08-2022 - By: Sienna Lewis

Throw pillows can be made with or without piping on the sides to get a specific shade or to remove all of the colors from the fabric. Having said that, you may have be aware that throw pillows are among the most essential decor items you may have in your house. A few explanations for this are as follows:

They’re not expensive

Throw pillows are a cheap and easy way to add color to your house without breaking the bank. Pillows can also add a luxurious and textural touch that you’ve been looking for to your indoor living areas.

How to Make a Throw Pillow with Piping - YouTube

You can change them in a snap

Since these versatile yet functional decorative accessories won’t cost much to make, you can easily change them according to the latest trends, as well as seasons. Keep in mind that there are no rules when it comes to being creative. If you want a lot of space for your creativity while being sure that your pillows will still look good, consider purchasing sofas that come in plain white or neutral colors.

They allow you to express your artistic side

You may simply switch up the look of your home’s decor by making these inexpensive and versatile decorative additions. There are no rules when it comes to being inventive. Sofas in basic white or neutral hues are a wonderful option if you want a lot of room for your imagination but yet want to make sure your pillows look nice.

Ready to Make Your Own Throw Pillow with Piping?

In order to construct pillow covers, the back portion must be 18 inches wide, but if you want to make envelope locks, it must be two inches wider. Additionally, you’ll need a string that you may sew over your pillow to fit the desired size.

Don’t forget about the color of your piping. A 1/2-inch seam is required on the tape, and it must be wide enough to cover your string. In addition, you’ll need a string and an insert cushion in the same wide range of tone that you’ve selected. The edges can be sealed with a different zipper.

How to Make a Throw Pillow with Piping: What You Need to Know

Fold the thread into a tapestry. If the ends of the tape are compatible with the strings, you can opt to cover the string and leave an extra 1/5 inch of tape. Discard the wrong side of your front pillow cover.

Make sure that the raw edge of the tape is placed at the center point of the lower edge of the fabric. All three raw edges may need to be balanced. Using a rotary cutter and a cutting mat, you may get precise and even cuts during the cutting process.

When you’ve done that, pin 2 cm from the fabric’s edge. Make the thread that connects to the zipper’s foot with a sewing machine. After you’ve pinned it in position, put your item in and lower the zip foot. Afterwards.

Simple Envelope Pillow Cover with Piping - Sincerely, Marie Designs

The piping should be left unstitched for a few centimeters. Then, continue stitching along the material’s edges using the correct stitch. It is possible to see the bulge created by the thread on the inclination belt.

Keep the needle in the towel and use your scissors to make about 3-5 snaps at the tip when you are one or two inches from the raw edge. Turn the corner without tampering with the screw.

Repeating the steps

Continue to work slowly and methodically. Keeping the needle down, lift the foot, adjust your fabric, and place the pipe to the right side until it’s about half an inch from the raw edge. Go to the next one by lowering your foot and stepping backwards

This process must be repeated at each corner. When you get to the beginning of the final side, stop stitching for about 2-3 inches. Cut both ends of the rope at the same time.

For this step, you’ll want to go back and fold the tape over to the cord. Remove the rough side by folding the edge. Then, tuck it in with the inside of the string once again. The pipe is beginning to appear on the surface.

Begin stitching again from where you left off earlier on the piece of fabric. Continue to sew the correct stitch, as instructed. In the end, you’ll have piping on the front of your pillowcases.

Additional tips

Whatever type of pillowcase you design, when sewing the back, make sure the small bit of tape is positioned flat on the surface. This is to keep your pillowcase from being too stuffed.

If you don’t, the tape will show up in the middle of the finished piece, not at the corners. The piping should not be sewed to the zipper if you are adding a zipper. Make sure to inspect underneath the material to see whether the pipes are not strained by dropping your foot.

How to Take Care of Your Throw Pillows

Act Before You Think

Literally. Do something if you accidentally spill something on your throw cushion. Before you even consider whether the white wine will show up on your blue velvet, take action. Whatever it takes: salt, soda water, bleach! The best way to take care of your throw pillows is to be proactive in stain removal.

Give Them a Facelift

Is the cover on your throw pillows removable? Pillows with removable coverings are the most popular choice. Rather than spending money on new inserts, you’ll be able to reuse an old one and switch up your design whenever you want. Remove that red wine stain and give your room a fresh look just because you want to.

Wash Your Pillows

Pillows may and should be washed, and that is a given. Remove your cover as the first step. The pillow and its cover should be washed separately. Washing instructions are usually included on the label of most pillow coverings. Just use your best judgment if that isn’t the case. With warm or cool water and a light detergent, wash the cushion and its cover separately.

The whole pillow can be washed if you can’t get the insert out. The stuffing can get clumpy and difficult to dry if you wash the pillow cover and insert in one go. Consider having your insert dry-cleaned if it doesn’t come with cleaning instructions.

Air It Out

Afterwards, hang out your pillow coverings to dry. If you don’t wash it, relocating it to a well-ventilated area or letting it air out can help it smell better.

Fluff, Fluff, Fluff the Stuff

Pillow care doesn’t get much simpler than this. Keep your pillows in shape by fluffing them regularly. If your pillow still doesn’t seem to have enough volume, it may be because your stuffing is still damp. Your pillows will expand if you leave them in the sun for a few hours. If it doesn’t work, simply push and pat the sides of your pillows until they are fully inflated.

needle book: How to sew a pillow with piping, a zipper and a lining

How to Clean Throw Pillows

Check the manufacturer’s care label

Pillows may be recommended to be machine washed with a mild detergent on certain labels, whereas spot cleaning is recommended on others. Consider the fabric type if there is no care label. Silk and velvet, for example, are delicate threads that necessitate careful care, while cotton and polyester may be cleaned with water.

Option 1: Hand-wash the pillow

Using a white towel and the correct cleaning solution for the fabric, perform a spot test on your throw pillow before hand-washing it. This might be a dry cleaning method for fragile textiles, while upholstery shampoo can be used for more durable pillows. Check for color transfer after blotting the cloth onto the pillow. Make sure no color has faded from the fabric by allowing it to dry and then checking it again. A sponge soaked in the cleaning solution or shampoo is all that is needed to clean the cloth if everything appears to be fine. Make sure to get into the piping and any other creases with gently, circular strokes. Clean white towels can be used to remove any remaining wetness.

Option 2: Machine-wash the pillow

Tossing a throw pillow into the washing machine is the quickest and most convenient way to get rid of the stains. Remove the coverings from the cushions and wash them separately. Wash the pillows in warm water on the gentle cycle with a moderate detergent. Almost entirely dry them by hanging them in a well-ventilated area. Using a couple of dryer balls, fluff and reshape the pillows in the dryer.

Final Thoughts

Keeping an eye on the development is critical because this undertaking necessitates persistence and tolerance for the inevitable setbacks. To make a piping-embellished throw pillow, follow these simple instructions.