Updated at: 14-04-2022 - By: Sienna Lewis

How do you repair a squeaky bed? There are three simple actions you can take to accomplish this, and they’re not complicated at all, so there’s nothing to be concerned about.

It’s true that a broken bed can have a negative impact on our sleep habits, quality of sleep, and immune system if we sleep on it for a lengthy period of time.

Since the mattress is held in place by the bed frame, you need it to be intact so that you can get a restful night’s sleep. You should buy a new bed if your current one isn’t as comfortable as it used to be.

Alternatively, what if you want to save money by repairing it yourself? If so, you’re on the correct path!

Keep reading if you’d want to learn how to fix a broken mattress.

What causes a bed frame to break?

A good night’s rest requires a good night’s sleep. Sleeping in a pleasant environment is necessary to accomplish this goal.

Choosing a comfortable bed is an important element of ensuring a good night’s sleep. The primary function of a bed frame is to support the mattress.

The mattress will move around a lot if your bed frame isn’t strong enough to keep it in place, which will make sleeping a miserable experience.

How to Fix a Broken Bed Frame - Homebli

Mattresses might sag if the bed frame is too weak. This may necessitate the purchase of a new bed frame as well.

Sometimes, a broken or collapsed bed frame might be a contributing factor in a midnight accident.

What could possibly go wrong with a bed frame?

A bed frame can be broken for a variety of reasons. The quality and type of material used in the construction of the bed frame determine its strength.

Metal bed frames appear to be more durable and less likely to shatter, whereas wooden bed frames are notorious for splitting and breaking with time.

There are a number of factors that impact how long a bed can last and how much pressure it can bear. Depending on its quality, some varieties of wood are more durable than others.

Different sections of a bed frame may break depending on how much pressure is applied to them. When putting together a new bed, it’s possible that the frame will be crooked or ill-fitted.

Because of this, the bed frame will be stressed in the wrong places. This can lead to a crack in the bed frame, which, if not spotted, can lead to the bed collapsing under the weight of a person while they sleep.

The railings or sidebars can be broken if the installation is done incorrectly. The weight of the occupant could also be a factor in the breakage of a bed.

The railings and sidebars of the bed can be broken by a person who is very heavy.

Gradually, the bed would crumble due to the formation of cracks in the structure. It’s possible that goods are placed on the bed, but this is rare.

This can eventually lead to a broken bed frame if the weight is too great for the bed to support.

How to repair a broken bed frame

There are a few things to keep in mind when attempting to repair a shattered bed frame.

The material used to construct the bed has a significant impact on how it will be mended. This also has an effect on the bed frame’s ability to sustain different kinds of damage.

Metal and wood are the two most common materials used to construct beds. Welding is the ideal way of repair for iron beds, whereas woodwork is required for wooden ones.

The sort of bed frame damage must be taken into account as well. Are there any more parts missing?

Are the rails or the footboard the headboard or footboard?

This will be the deciding factor in how the bed repair will be carried out. Bed frames made of wood are the most prevalent, although they are prone to splitting and cracking from regular use.

When mending a bed-frame, the sort of crack or split will dictate the method you apply. An added benefit of wood-framed beds is that they can be repaired easily and quickly.

Steps in repairing a broken bed frame

Repairing a crack in a wooden bed frame will be the subject of this how-to..

Define the extent of the crack

This will help establish what repairs will be required. Determine if wood glue is adequate or if a few nails are needed to secure the frame.

Putty or wood filler may be all that is needed to mend small fractures. As the wood filler dries, it shrinks, thereby bringing the cracks together.

It’s possible that the putty will need to be colored to match the bed frame’s wood if the two don’t match.

Assemble the required tools and disassemble the bed

You’ll need to gather all the tools you’ll need to do the repairs.

You’ll need the following equipment:

  • Gloves
  • Clamp
  • Adhesive for wood

Depending on the scope of the repair, you may require specific tools and materials.

How to repair broken bed easy - YouTube

Dismantling the bed will make it easier to get to the damaged region and less likely that you’ll introduce new cracks in the course of fixing it.

Clean the broken area

In order to get the most out of the glue’s adhesion characteristics, it’s critical that the region be thoroughly cleaned before applying the glue.

These regions need to be sanded and wiped so that the glue does not create air pockets when it is applied.

Apply the glue

At this stage, the wood glue can be applied to the damaged region. Wood glue or epoxy might be used to repair the fracture, depending on the severity of the damage.

Spread the glue along the wood grain with a thin rod after applying it along the crack’s length. Make certain that it completely covers the wood.

Clamp to dry

In order to keep the repaired area in place while it dries, clamps must be installed beforehand. After tightening the clamp, use a damp cloth to remove any glue that may have oozed out during the clamping process.

The glued area can then be left clamped overnight or according to the glue’s manufacturer’s directions.

The glued area can be smoothed out and finished neatly by sanding off the clamps once the glue has fully dried.

Your bed frame is now complete and ready for use!

Its time to avoid bed breakage

Quality wood should be used to build or buy your bed to avoid having to spend time mending it.

If you buy or build a bed frame from high-quality wood, you may expect it to last for many years. In addition, a high-quality bed gives your bedroom an upscale appearance and feel.

How To Reinforce A Bed Frame

Reinforcing Your Bed Frame

Having a bed that shakes and squeaks with every abrupt movement is the worst thing that could possibly happen to you. Reinforcing your current bed frame rather than purchasing a new one will save you money in the long run. Basically, this means that you’re making it more stable, strong, and quieter (hallelujah). These tips will help you restore your bed frame to near-new condition.

There are a number of ways to solve the problem, depending on the nature of the issue and the sort of bed frame you have.

A drill, 1-inch screws, and a second-hand bed frame are recommended tools.

You should first inspect all of your bed’s individual slats (if there are any) and screws to ensure that nothing is loose – even the legs. The most typical cause of a squeaky or shaky bed is worn-out screws and bolts. Good news: it’s a simple remedy that only requires a screwdriver or wrench!

If you sleep on a wooden bed frame, reconnect any joints that may have shifted over time. Destabilizing a bed frame by separating its joints can cause it to wobble and sway. A friend or family member can help you hold the frame by laying cloth on both sides of the joint. Gently smash the two pieces of wood together with a mallet, and then do the same with the remaining joints.

Reapply wood glue to the inside of a previously glued bed frame by wrapping cloth around each side of the joint. After that, use a clamp to hold the joint together while it dries and gently hammer it back together. Repeat this process for any other joints that appear to be unconnected..

If your bed frame simply has a perimeter and a central support beam, adding slats will strengthen it and make it more stable and stable. This will keep your mattress from sinking and allow your bed frame to bear greater weight.

  1. To figure out how long your new slats should be, measure the bed frame’s inner width.
  2. You’ll need a pencil and a hand saw to mark the length of a 14 ft wooden board.
  3. Follow the first two steps again to make a second wood slat, or take your measurements to your local Home Depot or Lowe’s and have them cut the wood for you.
  4. Placing the boards around 2 or 2 1/2 feet apart from each other will help keep the frame’s centre bar stable.
  5. A power drill can be used to fasten the new wooden planks to the bed frame’s inside lip.

If you think the central beam of your bed frame is the main problem, you can get rid of it and replace it with something that will provide a little more support.

  1. Remove your bed frame’s central beam by unscrewing the nut on the center beam.
  2. Determine the length of your new center beam by measuring the width of the inner bed frame from side to side.
  3. Make sure your new support leg is long enough by measuring how far from the floor to the bottom of the middle beam you have to go.
  4. It is possible to cut a piece of 14 wood yourself using a saw or to take your measurements to your local hardware store and have a professional cut a piece of wood for you using a pencil and a 14 wooden board.
  5. Using a 4×4 block of wood, repeat step four for your new support leg.
  6. Drill two wood screws through the top of the plywood center beam into your cut wood block and into the center of the new center beam.
  7. Make use of a power drill to fasten the new center beam to the bed frame on both ends.

How To Fix A Broken Bed Frame

If you missed the “reinforcement” section of this post and now have a cracked bed frame as a result of the lack of support, don’t give up just yet! You never know what can happen. As a general rule, horizontal grain lines or the frame’s ends are most likely to be affected. Use your inner handyman and follow these eight steps if that is the case:

  1. Keep the slats in place as you use a screwdriver to pry open the split from the inside of the frame after you remove the mattress. Scrape away all the excess splinters and wood particles.
  2. Spread wood glue over the crack with a flat-headed knife, much as you would with a putty knife.
  3. After you’ve used a bar clamp to press the split back together, add glue to the crack. Keep them on the frame for the night so that they may dry thoroughly.
  4. When everything has dried the next day, measure the length of the split from the inside of the frame and add 6 inches to it. This will reinforce the frame and ensure the joints are strong.
  5. You need to know how wide your bed frame is.
  6. Cut a 12″ strip of plywood or other 12″ waste wood to the exact measurements you took earlier.
  7. Using a 3/16″ bit and a drill, cut 2″-diameter holes in your scrap piece of wood. Make sure the holes are staggered and not in a straight line.
  8. Glue one end of the scrap wood to the inside of the split and set it there. Let the frame dry again overnight before reinstalling your bed and drilling 1″ screws into the pilot holes.

Buying A New Bed Frame

Reinforcing your bed frame may not be an option if it is beyond repair, in which case it’s time to shop for a new one. Frames for beds come in all shapes and sizes, as well as in a wide range of price points. However, the size and materials used in the construction of a bed frame substantially determine the price, with some adjustable bed frames costing more than $1,500. Consider your budget, demands, space, and size requirements before you begin your search for a new bed frame.

Broken Bed Repair - Need your bed back?


Can a broken bed frame be fixed?

One of the most prevalent issues is the development of cracks and fractures in the bed frame due to insufficient support. In most cases, the grain lines on each side of or at the conclusion of the frame divide the frame. Glue, clamps, and some scrap wood can be used to fix the problem.

How do you fix a broken bed frame?

Spread wood glue over the crack with a flat-headed knife, much as you would with a putty knife. Clamp the two ends of the split together with a bar clamp until you see glue oozing out of the crack. Keep them on the frame for the night so that they may dry thoroughly.

Why did my bed frame break?

Bed frames might collapse when they’re put together incorrectly, have worn out or are used incorrectly. For the most part, bed frames don’t need to be updated or cared for for more than a few years. Metal frames have a longer shelf-life than wooden frames because of the material they are constructed from.

How long should bed frames last?

The ideal is to replace your bed frame every ten years, but most individuals buy one every fifteen to twenty years. It’s possible that after 10 years, the frame has degraded by up to 70% from its original “as new” condition.

How do you repair broken wood?

Small cracks and gaps can be filled with wood-filler epoxy resin or superglue. Wood furniture that has minor cracks, small splits, or missing parts can be repaired with superglue or wood-fill epoxy resin. The wood pieces are held in place with the help of these adhesives.

Can jumping on a bed break it?

The mattress will settle unevenly if it has broken springs or damaged horizontal rails, diminishing its support foundation and hastening its death. Your mother was right—don’t jump on the bed!

How to Fix a Broken Bed Frame?

Cracks and Splits

One of the most prevalent issues is the development of cracks and fractures in the bed frame due to insufficient support. Horizontal grain lines on either side or both ends of a frame are common locations for a split. Glue, clamps, and some scrap wood will do the trick.

Step 1: Strip the Bed

Remove the mattress and box springs from the bed frame. Keep the slats where they are.

Step 2: Pry the Split Open

Using a screwdriver, pry open a small fracture in the frame from the inside out. Use a utility knife to remove any splinters or chips that may have formed.

Step 3: Add Glue

Use the tip of a glue bottle to apply glue along the split. Use a putty knife’s narrow blade to spread the glue into the fracture.

Step 4: Add Clamps

Set up bar clamps across the frame and tighten them until glue begins to flow out the crack’s length. Alternatively, C-clamps can be used, however they lack the holding force of a bar clamp. Stay with the clamps on the frame for the night.

Step 5: Reinforce the Joint

Add six inches to the length of the split on the inside. Take a measurement of the frame’s width. To cut a strip of 1/2-inch plywood, or any other scrap wood, use a table saw or miter saw.

Step 6: Drill Holes

With a 3/16-inch bit and an electric drill/driver, randomly space the holes about 2 inches apart on a scrap piece of wood before using it as a template. Screw holes should be spaced apart so that they don’t line up with one another.

Step 7: Glue and Screw

Scrap plywood should have a thin layer of wood glue applied evenly to one side. Inside, place it over the split. Using the pilot holes, drive 1-inch screws into the plywood. Before utilizing the bed, let the frame dry out for a few hours.

Bad Joints

It’s common for antique beds to employ mortise and tenon joints, which can loosen and require metal brackets to hold them in place. Remove the brackets, fix the junction, and reinstall the brackets.

Step 1: Remove the Brackets

To remove the metal brackets, use a drill/driver to unscrew the screws that secure them to the frame. A 90-degree piece of metal is positioned on each corner of the frame to support each of the metal brackets. The mortise and tenon joint will be screwed on if your bed has brackets.

Step 2: Disassemble and Clean

Inspect the joints. There are two types of mortise and tenon joints: those that are square, and those that are rectangular. Tap them apart with a rubber mallet if they’re loose. Use a chisel to remove any dried glue. Don’t dismantle them if they’re not loose.

Step 3: Add Wood Tape

The tenon should be measured. Cut the wood tape into two equal pieces using scissors. On increase the tenon’s width, glue wood tape to it. Use two pieces of wood tape on either side of the tenon if the joint is too sloppy.

Step 4: Glue and Reassemble

Apply a generous amount of adhesive to the tenon-receiving slot. Using the rubber mallet if necessary, reassemble the frame.

Step 5: Install the Brackets

Remove old screws and reposition brackets so that the current holes in the brackets do not line up with the holes in the old screws. Attach the brackets to the wall with the supplied screws. To replace them, use new screws of the same length.

Slat Problems

New slats should be used to replace any that are damaged or excessively short. If the slats don’t already have screws, drill a 3/16-inch pilot hole in the ends and attach them with 1 1/4-inch screws — one for each end of the slat. Add a drop of adhesive to each slat for an even greater level of protection.

Center Supports on Wider Frames

There may be an issue with the box springs if you can’t detect anything wrong with the frame. Cheap lumber is frequently used around the box’s edge and at its base by manufacturers. A middle rail is also common on wider beds. The middle of the bed sags if it fractures or splits. Cut 3/4-by-2-inch pine strips to fix the issue. For additional stability, pre-drill and screw them into place along the bottom perimeter with a 4-inch piece screwed to the center rail. Screw the pieces over the thin mesh covering at the bottom and don’t worry about it.

How do you join two pieces of broken wood?

Both shattered sections should be glued together. Blow down any loose fibers or splits with an air hose to get the glue in there. Put the two pieces back together by hand with as much power as possible. Cracks in the wall should be oozing with adhesive.

Can you fix split wood?

In many circumstances, repairing split wood is a simple and straightforward task. However, if you’re dealing with more significant splits, you’ll want to take your time and get the job done correctly. Even though you don’t need all these items to restore your wood, they might make it look as if it was never split in the first place.

What is the strongest glue for wood repair?

It is one of the strongest and most long-lasting wood glues available. Because it can be applied to a wide range of materials, it is a very adaptable product that can be used to a wide range of materials. One of the most widely used polyurethane-based glues is Gorilla Wood Glue.


A bed’s principal goal is to make you feel comfortable while you sleep.

Broken beds can be dangerous, thus they don’t serve their intended use once they’ve been broken.

The cost of purchasing a new bed has risen significantly in recent years. That’s why we’ve laid out the actions you need to do to cure some of the most frequent bed issues!

You’ll save money and learn how to fix a broken bed as a result of this article.