Canopy beds have a strong connotation of regal splendor due to its towering design. Canopy beds are popular, though, because of the sense of seclusion and warmth they lend to a bedroom. It’s possible to find any style of canopy bed imaginable, from a classic oak one to a sleek and contemporary metal one. Look at the 10 essential canopy bed accessories and learn why you need them. The good news is that there are various ways to transform any bed into a canopy bed, despite the fact that canopy beds tend to be more expensive. But how can you make a regular bed look like a fancy canopy one?
- How To Make Your Twin Bed Bigger? All You Need To Know
- How To Make A Bed On The Floor? Comprehensive Guide
- How To Make A Bed Skirt Out Of A Sheet? Easy Step-by-step Guide
- How Long Should You Wait To Shower After Tanning Bed? The Best Time to Shower
- How Much Does An Adjustable Queen Size Bed Base Weigh? Everything To Know!
Here are some easy instructions for transforming your regular bed into a canopy bed: Get the right measurements for your canopy, purchase a ready-made canopy or the components to create one, then finish the look with drapes or curtains.
Whether it’s the aesthetic appeal or the functional advantages that draw you to canopy beds, it only takes a few minutes to transform any bed into one.
In the following paragraphs, we will go into greater detail on how to change any bed into a canopy bed.
These articles may also be of interest:
- Select a mattress topper for your canopy bed that encourages airflow everywhere on the mattress.
Different Types of Canopy Beds
Canopy beds are available in a wide range of sizes and design options. Canopy beds, in the traditional sense, have a tall, slatted structure above the mattress and are roofed in with fabric or other materials (such as wood or metal). Half-canopy beds and beds with a central canopy rather than a canopy that spans the entire length and width of the bed are also available. Take a look at our detailed manual on canopy beds for additional facts.
Four-poster canopy beds, tester canopy beds, half tester canopy beds, and crown canopy beds are only a few of the many variations on the theme.
Classic Four Poster Canopy Beds
Canopy beds come in a variety of designs, but the most common and versatile is the classic four-poster canopy bed. All four corners of the bed are supported by lengthy posts, and the whole thing is framed at the head. Adding curtains across the canopy frame is optional. Many variations on the classic four-poster canopy bed are available, ranging from ornate and traditional to minimal and contemporary. Here is an excellent case study from Amazon.com.
Tester Canopy Beds
In contrast to traditional canopy beds, in which the canopy is secured to the bedposts, Tester canopies are free-standing and envelop the entire bed. The canopy, on the other hand, is typically mounted to the ceiling or the bed’s headboard. If the concept of four long poles framing your bed gives you the creeps or if you just believe the canopy structure seems too massive with four posts, this form of canopy can be more to your liking. This design is a classier alternative to traditional four-poster canopies that yet gives beds a feminine feel. Here is a mockup of a canopy bed with drapes affixed to the roof.
Half Tester Canopy Beds
The canopy of a half tester bed extends over only half of the bed (and may cover less than half of the bed). The canopy in this design is typically hung from the ceiling or the headboard. People who are uncomfortable in confined settings yet adore canopy beds will appreciate this alternative. Refer to this research for more on the potential links between claustrophobia and sleep disturbances.
Crown Canopy Beds
Crown canopy beds get their name from the canopy that hangs over the sleeping area and the drapes that reach down to the headboard’s corners. If you’re looking for a way to give your bedroom the luxurious feel of a canopy bed without really having to put up a canopy, this is an excellent alternative.
How To Convert a Platform Bed into a Canopy Bed
A platform bed, in contrast to the ornate and intricate design of many canopy beds, is a simple and straightforward option. If you’re thinking about upgrading from a platform bed to a canopy bed to add visual appeal to the room or increase the level of privacy for your bedroom, you don’t have to get rid of your old platform bed. A platform bed can be transformed into a canopy bed in a number of ways.
Install curtain rods in the ceiling and hang drapes to create a canopy over a platform bed, or purchase a prefabricated canopy frame constructed of PVC tubing.
One of the easiest methods is purchasing a canopy structure made of PVC tubing and positioning it so that your bed sits in the center. With the addition of some drapes or curtains, you can easily transform your platform bed into a canopy bed. If you want, you may spend less than $30 for a ceiling-mounted canopy similar to this one.
Instead of purchasing an expensive canopy structure, you can get the similar result with just a few curtain rods and drapes. We’ve broken down the canopy bed conversion process into manageable steps for your convenience.
Here’s how to make your platform bed look like a canopy in no time:
- Take some measurements of your bed’s dimensions.
- Buy two curtain rods for each size, then add 5 inches to each dimension (four in total).
- If you don’t already have them, you’ll need a drill, a ladder, some screws, and four curtain rod holders or a single curtain rod track (like these) to hang your curtains.
- Mark the four corners around the bed using the ladder, extending the width and length by about 2 inches.
- Fix the curtain rod holders to the ceiling at the indicated positions using the drill and screws.
- Curtains are hung by sliding the rods onto the rod holders and then locking the rods into place.
The best part about this solution is that it can easily be reversed by putting the curtains back up and using the bed as a regular platform bed.
How To Convert Bunk Beds into Canopy Beds
Especially in a child’s bedroom, the addition of a canopy to a set of bunk beds makes them more fanciful and exciting. Canopy beds can be made from a variety of different bed frames and materials.
If you already have bunk beds and want to turn one bunk into a canopy bed, you’ll need to choose which bunk you want to turn into a canopy first. Hang curtain rods from the space between the bottom bunk’s bedposts to create a canopy bed. Buy a prefabricated bunk bed canopy for the upper bed, then use drapes to cover the lower bunk’s open sides to make a canopy.
Converting a bunk bed to a canopy bed can be done in two different ways. We’ll lay out some suggestions and how to implement them down below.
Bottom Bunk to Canopy Bed Conversion
If the upper bunk is available and not in use, you can use this strategy. Consequently, if this describes your situation, please proceed as detailed below.
- Take the mattress off the upper bed.
- Install curtain rods below the upper bunk, between the bedposts.
- Hang drapes from the rods so that they complement the decor of the space.
- Your bunk bed is now a canopy bed, thanks to the upper bunk’s function as a roof.
Top Bunk and Bottom Bunk to Canopy Bed Conversion
Using this procedure, you can convert a bunk bed into a double bed.
- Simply set a prefabricated bunk bed canopy over the upper bed. If you want a canopy but don’t want to put in a lot of work to get one, this is a decent option. Dorm roommates who value their own space will also find this an excellent choice. Curtain rods can also be mounted to the ceiling as an alternative method of curtain installation. The length of the curtains allows you to conceal either the top bunk or the entire bed.
- Make sure the bottom bunk of your bunk bed is supported by rods that extend the length of the bed as well as the width. The rods at the top bunk can be used to hang curtains to conceal the lower bunk. Curtain rods can be attached to the inside of the bunk bed posts in the absence of rods. One way or another, the lowest level of your bunk bed will take on the appearance of a canopy bed.
Articles Related to “Related Articles”
- Tip: Drape the top bunk with curtains
- Choosing Between a Canopy Bed and a Sleigh Bed
How To Convert a Four Poster Bed into a Canopy Bed
The transformation of a four-poster bed into a canopy bed not only improves the aesthetics of a bedroom, but also increases privacy and reduces light pollution (for more on the impact of light on sleep, check this study). The best strategy for this transformation is up to you, since it will depend on the material of your current bed and the aesthetic you hope to achieve. Four-poster beds are the most straightforward option for creating a canopy over your bed.
Using hooks and wire or bars made of wood or metal, a four-poster bed can be transformed into a canopy bed. After the canopy frame is up, it’s as easy as hanging curtains or drapes over it.
The primary step in transforming a four-poster bed into a canopy bed is joining the posts together to form a frame above the mattress. There are a number of ways to construct the frame, including utilizing hooks and a strong wire to attach the posts, or using bars of wood or metal. You can cover the frame with fabric or something else, or you can leave the top open and hang curtains along the sides. Another option is to simply drape a single piece of fabric over the framework, allowing the edges to hang down like curtains. Here are some wonderful options for canopies to hang over four-poster beds.
By adding metal or wooden bars to a four-poster bed, you can easily transform it into a canopy bed. Several user guides, including this one from West Elm and this one from Lauren Canopy Bed, provide in-depth instructions on how to put together a canopy bed.
- Place a marker on one of the posts at the desired height.
- Mark all the other posts with the distance you determined from the post’s base or cap.
- Take the length of the bed as measured from one end post to the other. There are posts on both the left and right side of the bed that can be used for this purpose.
- Take a measurement along the length of the bed from one post to the other.
- Select two parallel wooden or metal bars that are equal in length and breadth (you will have four bars in total, one for each side of the bed).
- Complete the frame by fastening the longer bars to the posts along the length of the bed and the shorter bars to the posts along the width of the bed using a drill, furniture brackets, and screws.
- Make sure each bar is fastened at the exact height you marked it.
- Fabrics of all kinds can be hung from the bars or draped over the frame.
Canopy Bed Ideas for Inspiring Your Canopy Bed Conversion
It’s possible to make your regular bed look like a canopy bed, or to transform your canopy bed into a regular bed, using a variety of techniques.
There are many different types of canopies you can make, from simple curtain rod canopies to elaborate half tester canopies and even inventive branch canopies, all of which can provide as inspiration for your canopy bed conversion.
The following is a collection of canopy bed makeover suggestions to get you started on your own project.
Elegant Half Canopy Bed
There is no need for expensive drapes or curtains when you use this method to make your bed look like a half canopy. The attractive half canopy seen in the picture is easily created by installing two little curtain rods in the ceiling as illustrated. These rods should support your curtains just well.
Innovative Slanted Canopy Bed
Loft spaces and rooms with sloping walls are ideal for this arrangement. You may get this effect by installing a curtain rod on the ceiling, hanging a curtain, and then tucking the curtain’s tail beneath the bed’s headboard. This design is enhanced by curtains made from fabric depicting a dreamlike scene, such as the stars, the moon, or the galaxy.
Classic Canopy Bed with Curtain Rods
If you want to turn your bedroom into a sanctuary of solitude, this is a fantastic plan. Curtain rods can be mounted to the ceiling on two or all four sides of the bed, and then drapes can be hung from them to create a private sleeping space. You have the option of leaving the curtains open or closing them. Drapes fashioned from a flowy fabric can make the space feel more ethereal. This amazon canopy scarf is both lovely and lightweight. (~$30)
Sophisticated Half Tester Canopy Bed
Adding curtain rods to create a half tester canopy can transform a space into a luxurious retreat. In order to get the desired effect, you should fasten one rod to the ceiling and the other to the wall behind the bed. Then, you may hang up whatever cloth you like that goes with the decor. The drapes are an easy method to update the look of a room. Curtain rods made of brass are an elegant choice for this sort of canopy.
Creative Branch Canopy Bed
A fun and cheap canopy setup that will give your space a cabin-like atmosphere may be achieved by using a branch as a rod for hanging drapes. To get this appearance, simply suspend some fabric from the ceiling using a trendy tree branch. To finish the effect, tuck the excess cloth behind the headboard.
So, we’ve covered “Canopy Bed Construction,” let’s move on to other topics.
We’re positive you’ll be able to put together your own canopy bed using the information we’ve provided here.
However, if you’re interested in reading some further articles, you can do so by clicking here.
This is the case if you’re interested in understanding the concept of a canopy bed.