Updated at: 22-04-2022 - By: Sienna Lewis

There are many types of swivel hinges used in furniture, such as tables or chairs. Since consumers don’t have to shift furniture around, having a swiveling hinge is useful in the furniture industry.

The 10 Types of Hinges Every DIYer Needs to Know

Strap Hinge

Strap hinges can be used to hang huge doors and gates, such as those in a barn or other rustic-looking structures. From stainless steel to brass, they can be either useful or ostentatious depending on the materials used to build them. There are heavy-duty, light-duty, and even dummy strap hinges, which are merely decorative.

Butt Hinge

These hinges are called butt hinges or mortise hinges. Mortised into both the door and the frame, they are typically used in sets of three or four and connected together with a pin that may be removed.

Spring-Loaded Hinge

Do you want the door to automatically close when you leave? This can be done with a spring-loaded hinge. For example, these hinges can be set up to keep the hinge open or closed, with variable levels of tension. When it comes to pool and garage doors, spring-loaded hinges are generally needed by regulation.

Concealed Hinge

Cabinet and furniture doors are the most common applications for concealed hinges. They can’t be seen from the outside of the cabinet, as their name implies. Concealed hinges can be self-closing and include two screws per hinge that allow them to be adjusted in pitch and roll.

Piano Hinge

The piano hinge, which is also known as a continuous hinge, got its start on long piano lids, hence its name. In the modern world, piano hinges are no longer solely for pianos. They can be used for anything that requires a lengthy hinge, such as a storage bench or toy box.

Offset Hinge

You can easily and affordably enlarge a doorway using an offset hinge. The door is pushed out of the opening by the hinge, resulting in an increase in passage width of up to two inches. If you want to make it easier for someone in a wheelchair or walker to get around, even a few more inches can make all the difference.

Overlay Hinge

The overall thickness of overlay hinges is reduced by folding the hinges within themselves. It is common to employ them in kitchen cabinetry in order to make the doors fit perfectly flush with the cabinet front.

Hidden Barrel Hinge

When it comes to attaching lids to boxes, nothing beats a hidden or disguised barrel hinge. Insert the hinge by drilling a hole the correct diameter and then screwing it in. The hinge is fully hidden when the box is closed.

Scissor Hinge

Cabinet doors and lids, such as those on cedar chests, hampers, tool chests, and radiator covers, can be opened by means of a scissor hinge, which can lift or lower. To close the door, you must apply pressure to the hinge, which opens and holds open at a predetermined angle.

Gate Hinge

A gate hinge may be necessary for something with a large radial load, such as a metal or wooden gate. Using an L-shaped bolt, the hinge is fastened to the gate by way of a barrel. The door swings open and closed as the bolt in the barrel revolves.

Don’t Miss!

Sign up now for the Weekend DIY Club newsletter and receive great project ideas and how-tos every Saturday morning in your email!

Section One: Occasional Movement

What causes a swivel to rotate? Swinging furniture can be caused by a variety of factors, the most common of which are corroded or missing screws.

How do you prevent it from moving once at a time?

Tightening the screws to a higher position will fix the problem if there is no missing or loose material.

What happens if it’s still swinging or moving around often?

In order to prevent lateral movement, the pivoting screw must be tightened and inserted into the hole on its side.

Section Two: Constant Movement

How can you stop it from bouncing around? Check to see if the pivoting screw has been tightened all the way. Screws shouldn’t be so tight that they can’t move, but just snug enough to prevent threads from becoming stripped.

For keeping the hinge from swinging, what alternative options are available? In order to prevent harm to a swivel hinge from swinging out of place, there are several methods.

What’s the process behind the offset pivot hinge function?

The offset pivots are fixed in place and can’t be moved. The offset design ensures that doors open with an optimal space, preventing hot or drafty air from escaping through the gaps in the doors.

What can you do to fix the hinged door that is open?

Keeping the door open for a certain amount of time is the first step. To prevent swinging, a hinge is then installed on the other side of the space where people enter and exit. When someone leaves, a closing mechanism can automatically close.

Do you have to use an eagle to allow a door to open?

No. To prevent it from swinging open, you may, however, add an offset pivot hinge on the side of the area where people enter and exit.

Does a hinged door that can swing shut be used in this type of door?

Yes! An automated closer is the best option if you want a hinged door that can be closed without the need for a manual closing.

Do I require any specific equipment to set up this kind of hinge?

No. To complete the installation, all you’d need is a screwdriver or an electric drill.

How long will this hinge last? What’s the best way to tell? 12′′, 16′′, 20′′ and 24′′ offset pivot hinges are available.

How are the hinges installed? To begin, use a screwdriver or a drill to remove all of the screws that are around the door’s edges and remove the door from the frame. Consider how much space you’ll need for the hinge after that.

Is there anything I should know about installing this type of hinge in terms of safety precautions? Yes! Before utilizing a JIGSHAW to cut away the space required for installation, measure the area.

What are the benefits of this type of hinge?

The biggest advantage is that it’s simple to install and doesn’t take up much room when you’re ready to hang the door.

What is an articulation hinge that is a gravity pivot?

The bottom and top rails of the door frame are joined to gravity pivot hinges, which are a type of door hardware. It has two pivoting cups or sockets on the opposite side of the door. The rail to the left has a single socket on the right-hand side. Also known as “side A,” here is where the action happens.

It connects to the rail on the left’s left-hand end with the second socket Side B is the name given to this section. The first step in installing a gravity hinge is figuring out how much room is needed on either side of the door frame for one.

An hole large enough to accommodate two cup-like sockets that pivot can be cut into opposite sides of the frame. The next step is to measure the required space and align the two cups or sockets so that they may be mounted on the door frame.

Make sure the cup and socket fit snugly against each other before using screws to secure them in place.

Everything to Know About Pivot Hinges

The ability to pivot on the basketball court while keeping one foot firmly planted on the ground is a crucial talent. In the domain of hinges, the same principle holds true. In addition, there is a specific piece of hardware for it. For those who are unfamiliar with this type of hinge, here are the basics.

What Is a Pivot Hinge?

As the name suggests, pivot hinges allow a door to pivot from a single point on either side of the door. In contrast to butt hinges, which have a pin attached to the side of a door, pivot hinges are attached to the middle of a door. All of the components of a pivot hinge are attached to the upper and lower halves of a door. Additionally, pivot hinges allow doors to swing in any direction.

Watch this video for advice on how to fix drooping or stuck doors.

What Are Pivot Hinges Used For?

Pivot hinges are commonly used in doorways that see a lot of activity. Restaurants employ pivot hinged doors because they make it easier for waiters carrying trays to enter and exit the establishment. The doorway between the kitchen and dining area can also benefit from pivot hinges. They can also support heavier doors than some other hinges, because its bottom bracket is secured in place. They can also be found in cabinetry, such as on the doors of an entertainment center, where they serve the same purpose.

What Are Pivot Hinge Types?

Self-closing and offset pivot hinges are two additional options to the typical pivot hinge.

In this tutorial, we’ll show you how to restore ancient hinges to their former glory!

How Does an Offset Pivot Hinge Work?

For doors that need to swing free of their frame, offset pivot hinges are ideal. When a door needs to be opened out of the way, you’d utilize one of these. It is necessary to get the offset pivot hinge according to the side of your door in which they will be installed. (The process of determining which side of the door is the correct one is known as handing.)

How to Install a Pivot Hinge

Determine where the hinge plates and screws are in order for the door to open and close smoothly. To begin, mark the top hinge’s placement, and then use a plumb bob to find the bottom hinge’s location at the bottom of the door and the floor. Install the top hinge first, then the bottom half of the hinge that attaches to the door’s bottom. When you’re done positioning the door, attach the floor plate to the bottom of it.

Where Can I Buy Pivot Hinges?

If you’re looking for cabinet hinges, you can find them at Rockler and Amazon.com.

On Amazon.com, you can even buy complete cabin kits. You should have a look at these!


When would you use a pivot hinge?

It’s ideal to use pivot hinges if you wish to open a door by just pushing it open, and the door swings closed behind you. For heavier doors, these hinges come with a bottom bracket that secures them to the floor. In restaurants, this is the most common reason for their utilization.

How does an offset pivot hinge work?

What Is the Process of Offset Hinge? Offset hinges have a hinge pin that is placed a greater distance from the doorjamb. In order to increase the size of the opening, the door must be pushed back at least two inches when opened to a 90-degree angle.

What is the difference between hinge and pivot?

Hinge joints, like the hinges on a door, can only move in one direction. It permits only one direction of movement. Ankle, knee, and elbow are among the places where it can be found. Pivot joints allow a bone to be rotated across a different bone.

What is an offset hinge?

You can easily and affordably enlarge a doorway using an offset hinge. The door is pushed out of the opening by the hinge, resulting in an increase in passage width of up to two inches. If you want to make it easier for someone in a wheelchair or walker to get around, even a few more inches can make all the difference.

Where do I put pivot hinges?

High-traffic entrances frequently include pivot hinges. Restaurants employ pivot hinged doors because they make it easier for waiters carrying trays to enter and exit the establishment. The doorway between the kitchen and dining area can also benefit from pivot hinges.

Why use offset hinges?

It’s easy to open the door further out of the way by installing offset hinges (also known as swing clear hinges). This eliminates the need to carve a larger aperture and install a larger door by allowing access to the entire width of the entryway or opening.