A reset of your refrigerator may be tempting if something goes wrong with it. Resetting your refrigerator is generally discouraged, except in the most extreme cases, such as when troubleshooting processes advise you to do so. In this post, we’ll show you how to reset your fridge and your network connection if you choose to.
Reset your refrigerator
Even though we don’t advocate it, there is a simple method for resetting your refrigerator if necessary. Resetting the Family Hub’s screen or factory resetting the Family Hub fridge is also possible if necessary. Depending on your model and what you want to reset, follow the instructions below:
- It takes roughly five minutes for the refrigerator’s electrical charge to dissipate after you unhook it or switch off the circuit breaker. Restart the device after that.
- You can use the red switch on the top of the right door of your Family Hub refrigerator to reset the screen if necessary.
- In order to perform a complete reset of your Family Hub, go to Settings, then About Family Hub, then Factory data reset, and finally RESET. When prompted, select RESET again and then select Delete all data. Afterwards
When to reset (and when not to)
There are three scenarios in which resetting or disconnecting your refrigerator is appropriate: when troubleshooting, when moving the fridge, or when cleaning. For these reasons, we advise against resetting your refrigerator:
Codes that indicate problems with a computer system
If you see an error code on your refrigerator, it’s likely that it has to be repaired. On the display, the codes may appear in the form of numerals or individual lighted sections. As a precaution, you may want to investigate the problem depicted by this error code. Remember that not all codes are indicative of a problem with your refrigerator. Hold off on resetting until you’ve thoroughly examined the codes in this instance.
Of Off” or “O FF” is the mode for cooling down (also known as Demo mode). You don’t need to reset your fridge for this; all you have to do is switch off Demo mode.
The history of the error code.
During a reset, all of the fridge’s error codes and diagnostic information will be lost. In the future, a technician may have a harder time diagnosing and fixing the problem as a result of this.
The error code should be photographed as soon as possible, if possible.
When is it okay to reset?
At what point is it okay to reset?
Resets aren’t always neccessary; instead, call for assistance. Waiting for a service visit can be frustrating, but it’s in your best interest. It is possible to reduce the inaccuracy and continue utilizing the panel on Family Hub models. Troubleshooting and service will be more useful than any solution you can come up with to clear the code. At the end of our troubleshooting tutorials, you will find a link to request service.
Please take note that this only applies to devices that have built-in Wi-Fi.
If you need to wipe all of your refrigerator’s Wi-Fi and network information, you can perform a network reset. To unlock, simply press and hold the LOCK button for around 12 seconds.
Family Hub models can also be reset to factory settings. In Settings, select Wi-Fi and then select the Wi-Fi address that you want to connect with. Select Disconnect or Forget.
Troubleshooting guides for your refrigerator can be found on our help site if you are still experiencing issues. To find articles that address a certain problem, just conduct a search for it. Additionally, we have an article on refrigerator fault codes and troubleshooting techniques, as well as a guide on how to reset an ice machine.
When your fridge is on the fritz, it’s natural to be worried.
Worrying when your refrigerator stops working is a normal reaction.
As clever as Samsung fridges are, they’re also susceptible to simple mistakes. Fortunately, most Samsung refrigerator problems may be solved with a simple reset.
It’s especially true if you’re:
- Your fridge is still in Shop mode.
- Your fridge is still in the shopping mode….
- There was a power outage in your area recently.
- An mistake has occurred, as may be seen in the message that you are receiving.
How to Reset a Samsung Refrigerator in a Snap
To do a factory reset on a Samsung refrigerator, press and hold the power freeze and power cool buttons simultaneously. If that doesn’t work, unplug the refrigerator for 30 seconds and try again. You can also look for error codes online if that doesn’t work. There’s more information below.
The user manual should always be your first port of call when troubleshooting a device.
Is it missing from your collection? There’s no need to be concerned. You can find it online – I’ll show you how.
Are you ready to start over? Then check out our video tutorial, or read on for more in-depth information!
Finding Refrigerator Reset Instructions
It is the quickest and easiest way to reset your fridge to locate the particular instructions.
Even within a single manufacturer’s line of products, there can be wide variations in quality. The reset procedures for two Samsung refrigerators may be completely different. Finding the owner’s manual for your specific refrigerator can make all the difference.
Fortunately, the solution is straightforward.
In this case, Google is on your side. A simple search on Google for “Samsung Refrigerator Manual PDF” will almost always provide a result. In order to get the manual for a certain refrigerator model number, simply substitute “model” with the model number.
Troubleshooting advice can be found in the manual’s troubleshooting section.
Not sure what model you have? There’s no need to be concerned.
Many refrigerators can be reset using a few common ways.
Tips for Resetting Any Samsung Refrigerator
Your fridge can be reset with a few simple fixes. There are a few standard techniques for resetting smart fridges.
Press and Hold Buttons
Samsung devices can be rebooted by pressing the power button for five seconds, then releasing it. Most Samsung refrigerators have these two buttons. Holding both of them at the same time for several seconds will usually reset the fridge.
Check for Error Codes
Most Samsung devices can be rebooted by holding down the “power freeze” and “power cool” buttons at the same time for five seconds. Samsung refrigerators often have two buttons on the front of the unit. The fridge may usually be reset by pressing and holding both buttons at the same time for a few seconds.
Most of the time, smart refrigerators can identify their own issues. If you get an error message, you can look it up in Samsung’s database of error codes.
The Hard Reset
The hard reset is a universally applicable method of resetting a device. Everything with a computer chip in it can benefit from a little downtime. Fridges are the same way.
If a soft reset doesn’t work, you can try a hard reset. Be cautious, though, as doing so can sometimes result in the loss of all your saved settings. Before doing a hard reset, back up any schedules you’ve saved to your fridge.
- Turn the refrigerator off. Press and hold the fridge’s power button until the lights go out.
- Disconnect the refrigerator from its power source. Remove the wall plug from behind the appliance by reaching behind it. Glitch-free operation is achieved by disconnecting its power supply.
- Allow a minimum of ten minutes to elapse. Waiting for a while can assist the fridge’s motors cool down if it’s having difficulties cooling.
- Reconnect the refrigerator’s power cord and re-start it. 90% of the time, your fridge will be back to normal.
After the Reset
Most of the time, one of these reset procedures is all you need to fix your issue. Nevertheless, it’s a good idea to check everything just in case.
For the next few days, keep an eye on your fridge once it’s back up and running. You should check to see if the fridge is operating regularly, with no strange temperature changes or problem warnings. You’re good to go if everything appears to be working as it should.
Sometimes an internet guide just isn’t enough to fix a major appliance.
There are occasions when an online tutorial isn’t enough to solve a severe appliance problem.
Fill out the form below to get a free estimate from one of our affiliated refrigerator repair experts.
Why Do Refrigerators Need a Reset?
Everything that has a computer chip in it is susceptible to bugs. The smarter your refrigerator, the more parts it has that can freeze.
Programs can get stuck in a loop from time to time. It’s possible for a software to become unresponsive if it receives an overwhelming number of unrelated, conflicting, or illogical requests. So, the software becomes muddled and ceases to function.
This issue appears as a “Blue Screen of Death” on your PC. It can take the form of an unresponsive ice machine, a dark touch screen, or a blinking control panel in your refrigerator.
This issue can be quickly resolved by doing a hard reset. It allows the problematic program to be restarted after it has been terminated. A fast reboot will solve any issues that may have been caused by a temporary bug.
Incorporating the power of technology into your everyday routine is easy with a smart fridge. However, just like any other piece of technology, they are prone to malfunction.
I hope this fast instruction has helped you reset your refrigerator and given you some advice on how to keep it working in the future.
Learn how to locate and operate the best appliances for your house by reading our connected articles.
Thanks for reading. Have a great day!