Updated at: 30-07-2022 - By: Sienna Lewis

When you got home from a long day of work, you probably needed to take a short nap before continuing with the evening’s responsibilities.

Recliners are convenient whether you need to relax for a few minutes or sleep in until midnight. One of the most relaxing pieces of furniture is a recliner. Extra features make them useful in both the home and the office.

It’s possible for multiple people to make regular use of the chair because of how accommodating it is. Inevitably, your chair will show signs of wear and tear after prolonged use. Aside from other potential issues, tilting to one side is a major one.

Inquiry arises in your mind regarding the best way to correct a sagging recliner. Inconvenience and discomfort will ensue if your shifts to one side. Thus, recliner service will be required. A highly skilled technician is not needed for this fix.

At the very least, you should be able to straighten out a recliner that’s leaning to one side. There are a number of potential causes for your recliner to lean to one side. Finding the cause of the recliner’s lean will allow you to fix the issue.

However, a professional’s help may be required in some cases. Circumstances operating against it or worn-out parts and components can both contribute to a recliner tilting over.

How to Prevent Leaning on a Recliner - Krostrade

The design and quality of your chair will become immediately apparent after the first few times you use it. This is especially a worry with less-priced models that may have been built with cheaper materials.

Taking advantage of manufacturer warranties as soon as practicable is highly recommended.

Your chair has a mechanism that allows it to recline both forward and backward. If the sliding mechanism is damaged or malfunctioning, the chair may lean backward. This is usually the first thing that people think about.

Recliners that are used unevenly tend to lean over time. Imagine a situation where one foot or part of the base is higher than the others.

Consequently, the components in that area will be subjected to a greater amount of stress than those in other areas.

Some of the chair’s components can be replaced, but it’s in everyone’s best interest to find a new home for the chair as quickly as feasible.

You will need:

A screwdriver (for removing bolts and releasing panels);

Apply oil for lubrication (either to mechanism joints or to shattered wooden panel rejoining);

Oil-proof newspaper (to catch leaks);

(To lubricate squeaky joints) wood glue or plastic wood putty;

To pry open, use a pry bar (thick metal rod).

What To Do

  • Turn the key to release the wooden panel and footrest.
  • Turn your lounge chair over down by lifting it.
  • Using the screwdriver, remove all the screws, but don’t lose track of where you put them. Make sure they are in a safe place (plastic bags are a great idea) because you are going to need them again.
  • If you are unsure you will be able to reassemble everything exactly as it was, photograph every screw and bolt before you remove them.
  • Remove the cushions to reveal the bed’s true frame.
  • Can you spot any problems that need addressing?
  • Joints and springs that need oiling or re-tightening make up the vast majority of maintenance. If so, protect your floor from oil spills by putting down a newspaper under the item. Add some oil to the spring/joint and spray it on.
  • The springs must be securely fastened to the frame. Take care not to let the coils’ tension go as you operate in their vicinity.
  • If there is any excess oil after each process, wipe it away with a clean cloth.
  • If necessary, use a screwdriver to tighten any loose connections.
  • Wood glue or a metal brace can be used to repair a worn or broken wooden panel (to hold the construction together). If it breaks, you’ll need to replace it, of course. The panel’s screws can also wear out over time. For a solid hold, you’ll need to use glue to plug up the openings.

Steps on How to Prevent Leaning on a Recliner

First, make sure you’re using a footrest when you kick back in your chair. If you were to lean on it without doing so, this would relieve the strain on your back.

If you want to avoid having your feet slide down while you rest, make sure they are flat on the floor when you are sitting up straight.

Second, prop your chair up with a pillow or rolled towel. This will protect your feet from sliding into the footrest space and prevents you from slumping forward, both of which are good for your back. Pillows can also be placed behind your back for additional support.

What is Leaning?

Leaning occurs when someone supports their weight with another object. You can lean on anything from a table to another person. When relaxing in a comfortable recliner, leaning back is only natural. However, there are strategies you may employ to avoid leaning, so you can keep on enjoying it without risking injury to your back.

How To Stop Someone Leaning In A Chair - Yorkshire Care Equipment

How can I Make my Recliner Close Easier?

Inconveniences in using a recliner may be caused by a number of circumstances. The height of the seat in relation to the ground, the strength of the user, and their overall body composition are all factors. But there are solutions to this problem that you can try!

If your chair includes levers, the first step is to attempt squeezing the levers together to help you get up. If a footrest is available, you can also rest your feet on it as you adjust your seating position.

If these don’t work, it could be a sign that there’s something else wrong with your chair, such as a mechanism that’s making it hard to fully recline. In that scenario, you should seek advice from the chair’s maker.

A few Other Things to Consider

When getting out of a chair, avoid leaning on it, as this might place unnecessary strain on your spine and cause discomfort elsewhere.

If you are experiencing problems getting into the seat from standing, move the chair back or use a footrest to give yourself more room for your feet.

If getting into the seat from standing causes neck discomfort, try sitting at an angle with one leg crossed over. This can help distribute your weight more evenly across your pelvis and reduce the tension on your spine.

Finally, when reclining, keep your back as straight as possible to prevent injury to your spine, and lower yourself gently rather than all at once.

If someone else is going to be using the chair for a while or if you’re going to be sitting on it while carrying something heavy, you should probably put the chair in its upright position first.

How do you Stop a Recliner From Rocking?

If you want to prevent rocking when sitting in a recliner, try placing one foot on the floor or using furniture pads.

As you rock back in your chair, it’s important to keep your feet from slipping.

Instead of lowering yourself into the seat from standing, lift up with both legs at once.

How do you Adjust the Tension on a Recliner?

Turning a knob at the end of a recliner’s mechanism changes the chair’s tension. You should tighten this until it stops turning, but not so much that you can’t loosen it again.

How do I Recover my Own Old Chair?

When the chair’s seat starts to show signs of wear, stains, or soiling, you can easily recover it on your own. It’s a great low-priced option for maintaining your chairs’ like-new appearance.

When you recover an old recliner, you’re taking care of the seat, the arms, and the back all at once. The first step is to sand down the existing cloth to remove any paint that may have been applied over it. This will make it easier for the new paint to stick.

Is it Okay to Lean on a Recliner?

Stop lowering yourself into your chair when you’re done using it; rather, get up and set both legs down at once. It’s possible you’ve witnessed a few folks sitting and leaning back against the arms of their chairs.

While this may provide temporary relief, it can have long-term negative effects on your spine if you repeatedly favor one side.

How to fix a recliner that leans to one side?

You’ll need the proper tools to adjust the tilt of your recliner chair.

These tools are probably already in your possession, but if not, they may be purchased from a home improvement store or hardware store. A chair that leans to one side can be straightened out with relative ease.


You probably already have a screwdriver lying around your house because of its usefulness. To open locked doors, panels, or joints, a screwdriver will be required.

White Glue:

White glue has greater effectiveness than regular glue. White glue is a powerful adhesive, and it is therefore frequently employed in construction settings to keep things together. Stiffening wooden joints and/or wooden panels can be reattached using white glue.


Aged or rusted joints will need oil to loosen up so they can be removed or repositioned. It can be sprayed on or dripped on. In the past, we discussed how easy it is to fix a recliner that leans to one side.

Even yet, if you want to get the job done quickly and well, you need to pay close attention to detail and stick to the guidelines provided. By adhering to the steps outlined below, you should be able to fix the learning problem with your chair right away. What needs to be done is as follows:

The first step is to set up the reclining chair so that the secret panel may be reached with minimal effort. Start by loosening the panel’s fasteners. Do it again if the footrest is damaged.

The second step is to clear the area around the frame so you can see it better.

Third, if the springs or joints are rusty or noisy, lubricate them with oil. The floor should be covered with a towel or newspaper to absorb any spilled oil. When there is too much oil, it needs to be removed.

As a fourth step, you should use your screwdriver to secure any connections that came loose or came off entirely. Care must be taken around joints that are close to springs. The spring must remain taut and within the coils at all times.

Look for any cracks, even tiny ones, in the frame and joints of your recliner. You should immediately replace any that look to be broken. When a chair leans to one side, this is the first thing you should do to fix it.

Sixth, make sure you clear out the space where the old recliner portion was before removing it. After the area has been cleaned, the recliner’s manual/new-parts guide can be consulted for further installation instructions.

White glue can be used to fix any wooden pieces that crack or come loose in step number seven. Extra support can be added using metal bracing.

No. 8: Cover the machinery with wooden panels and restore the upholstery once all the pieces are in working condition and secured. Some simple rules should be observed when fixing a chair.

You should follow some rules if you try fixing your chair yourself. These rules are here to help you get the job done safely and efficiently.

Some of these rules may appear obvious, but they should still be stated for completeness.

3 Ways to Adjust a Recliner Chair - wikiHow

Precautions To Deal With A Leaning Recliner:

After loosening or replacing a joint, double check that it is still securely fixed. Joints and screws in the chair will serve you better if they are tight.

Applying oil to rusty or creaky fasteners makes it much simpler to remove and replace them.

You should get help with the task so that it can be completed safely. If you have some help, the recliner can be moved wherever it’s needed.

If your chair is leaning or not functioning properly, check for debris or anything that may have become lodged.

Need Professional Help:

You don’t have the slightest idea why you’re struggling to study. You have already tried to change out the part you think is at fault. Attempting to solve a problem by yourself could create even more issues in the road.

You’ve exhausted every internet resource in your search for the problem’s source, but to no avail. Because of your physical condition, you can’t get up and around to have a look at the recliner for yourself.

You can feel like you’ve exhausted all possible options without success. As was previously stated, figuring out why your chair is leaning in one direction is usually a simple and straightforward process. There are times when the problem is simply too big for you to handle on your own.

Examine the cause of the recliner’s tilt before calling for help from a repairman. It could end up saving you money if the scenario is simple.

Look Out Into The Future:

I’m going to assume you’re already familiar with the recliner’s wear and tear. In that situation, you can take measures to forestall further problems. The key to increasing the life of your chair is to keep it in good condition.

Recliners should be kept on a raised platform to promote balanced weight distribution. Inspect the frame and structure of your recliner frequently.

Keeping a record of your monthly checkups is a smart idea. You should buy just the best recliners available from renowned brands. To put it simply, cheaper recliners don’t last as long as their more expensive counterparts.

Frequently Asked Questions

Costs are usually between $2,000 and $5,000. Of course, there are basic models and those with more bells and whistles. Cushion density, extended levers (in manual recliners), footrests/headrests, reclining angles, and so on can vary greatly from one brand to the next, as can the base type (swivel, rocking, gliding), base material (leather, natural fabric, polyester, microfiber, acrylic, PU/faux leather), and additional features (heating, massage, vibration, speakers, USB ports, cupholders, etc.).

No. They differ from standard recliners in that they offer greater adjustment options. One reason is that automatic recliners tend to last longer and require less maintenance than their manual counterparts since they are used less frequently.

One can’t sit in the same chair for the rest of their lives. High-quality models from reliable manufacturers ultimately depend on you. The likelihood that your chair may break down quickly increases if you use it frequently and in a rough manner. If you love it and take good care of it, it will endure longer. Pets, children, scratches, and stains should be avoided. It’s important to be careful and delicate with your beloved chair, so try not to tumble into it or use it as a plaything for the remote controls. To compensate, it will provide trouble-free service for many years.

To put it another way: sitting for extended periods of time is harmful for your back everywhere you go. While many modern recliners may provide ergonomic enhancements like lumbar supports, this should not be used as an excuse to spend all of your leisure time there. One must always keep in mind that motion is the essence of life.

In terms of longevity, I’ve found that electric recliners tend to outlast their manual counterparts.

Incorrect; they must not dangle below the footrest. There should be no hanging, dangling, or touching of feet.

Long periods of sitting are bad for your legs just as they are for your back. The lack of movement in the muscles prevents blood from flowing easily from the legs back to the heart. Therefore, excessive time spent lounging in a recliner is harmful.

Troubleshooting Recliner Issues | Hunker

Products that use only organic components are better for the environment. Choose organic materials whenever possible, such as cotton, wool, genuine leather, and oak for the frames.

Final Verdict:

The chair is angled to one side for a number of reasons. Causes include, but are not limited to, broken parts, weak design, poor structure, and inexpensive material. First, if a guarantee was provided by the manufacturer, you should try enforcing that.

The recliner’s tilting could be remedied by lubricating the moving parts or simply tightening the screws. However, even with expert intervention, the problem still may not be resolved.

As a rule, this is a simpler and easier suggestion that nonetheless performs admirably. How can you straighten out a recliner that’s slanted? is expertly addressed here. Make sure you read everything carefully and follow the instructions to the letter.