Updated at: 26-09-2022 - By: Sienna Lewis

Quality furniture has been made by Flexsteel since the 1950s. However, even the best items need to be repaired from time to time.

Here, we’ll show you how to fix a Flexsteel swivel rocker using just a few ordinary home items from your neighborhood hardware store!

Steps on how to Repair a Flexsteel Swivel Rocker

Remove any damaged pieces of material that need to be replaced and inspect the area for further damage.

Step 2: Using a cardboard template, adhesive spray, scissors, and needle and thread, make fresh patches to cover the holes or tears.

In the third and last step, use liquid wood glue to repair the ripped upholstery on both the inside and outside (the underside is typically smoother).

Step 4: To achieve a solid binding, press the patches firmly into place for around 20 minutes.

Step 5: Give yourself at least 24 hours before you sit down in your swivel rocker again and take pleasure in how comfortable it will feel.

Be Comfortable Again: How to Repair a Flexsteel Swivel Rocker - Krostrade

How do you Take Apart a Flexsteel Recliner?

When dismantling a Flexsteel recliner, the first step is to remove the screws from the chair’s back. As a starting point, you can either work from left to right or from one side to the other depending on the arrangement of your chairs. It will be much easier to get in if they have zippers.

After removing the screws on the outside of the recliner, proceed to the rear of the chair by removing the screws. It will be easier to work with if the garment has zippers rather than none at all. Depending on how your seats are arranged, you can either begin disassembling from the left and work your way around to the right from here.

Once the back has been removed, you will be confronted with a zipper or some other form of fastening mechanism. The swivel rocker mechanism must now be dismantled. Using ordinary household tools like screwdrivers, hammers, and pliers, you can easily repair your Flexsteel swivel rocker.

For the most part, the mechanism may be repaired by simply tightening up the screws or replacing a few worn out parts.

Make an appointment with your local furniture store if you have any questions about this procedure. This can save you both time and money rather than purchasing a new one, which may be pricey..

When the swivel rocker mechanism doesn’t work, dirt and dust are the most prevalent causes. If this occurs, be sure to take your time and thoroughly clear up any debris before attempting to fix them from scratch.

Finally, if all else fails, you can always contact the furniture retailer and ask for assistance.

How To Repair Flexsteel RV Captain Chair?

These vehicles come with several advantages, and those who own RVs or motorhomes already know this. When you’re out and about, you’ll be able to relax with one of them. This is in addition to your car’s body and chassis. In addition to the exterior, the interior design has a significant impact on how much fun you have.

Companies typically equip their vehicles with a variety of features to ensure your safety. These can be easily replaced, though, if you desire a more modern look. One of the best firms to work with when it comes to RV furniture is Flexsteel.

They have a wide variety of options to choose from, making the selection process even more enjoyable. All of their furniture is listed on their website.

Flexsteel RV Captain Chair Repair

Flexsteel RV’s captain chairs are among the most popular products on the market. These are incredibly soft and comfortable, and they should help you have a good night’s sleep. It’s possible to adjust the chair’s height and even tilt its back using the several options available on it.

However, a large number of customers have complained that they had issues with the product as well. If you’re having the same problem, keep in mind that the chair can be readily repaired..

Resetting the device and checking for loose wires are recommended before beginning the operation. A lot of people have problems with their furniture because of these issues. In the event that you need to replace an entire component that has deteriorated, you’ll need to do so.

Prepare ahead of time so that you don’t encounter any difficulties during the process. When you need to fix the device, you’ll need a set of tools to get in there.

A local furniture store or an internet search will quickly provide you with the necessary replacement parts. To avoid having to send them back, make sure they are compatible with your device. To begin the process of repairing your Flexsteel RV Captain Chair, run a comprehensive diagnostic on it.

The chair must be disconnected from the power source and a panel behind it must be removed before you can replace the necessary parts. Taking the chair out of your vehicle is recommended if you are feeling stuffy.

While the cables are still accessible, this will make it easier to install the pieces. Take a few screws out of the main panel and you’ll be able to remove it. Once you’ve identified the damaged wire, you can proceed to inspect the rest of the wiring. Remove them and replace the faulty component. Tape should be used to cover the wires once they’ve been completed. T

ensuring that the connection does not get out of hand When the panel is closed, your chair should begin working normally. If you’re not sure which wires to replace, you can even examine the instruction booklet. Take the merchandise to an expert instead of trying to fix it yourself if you aren’t confident in your abilities.

Why has my electric recliner stopped working?

A built-in sensor detects how you’re sitting in most new electric recliners, and the chair adjusts itself accordingly. The chair’s mechanism can be damaged if it isn’t set up correctly before it is used.

When one side of a chair is too heavy or occupied for an extended period of time, this might cause discomfort.

Stella Sling High Back Swivel Rocker 7A900 Homecrest

This is the most prevalent problem, and it’s caused by someone stepping or sitting down on one of the levers to lift the chair back up after it has been reclined.

How do you fix a Recliner Mechanism?

You can use these steps to fix the recliner mechanism:

In the first step, lift the seat lever from the snared position by grabbing it on one side only. While using a pen or screwdriver may be necessary to gain the best leverage, be careful not to injure yourself with this pointed tool!

Put a chair under the recliner lever to make it easier to raise.

Once the seat has been reinstalled, release the levers and slide them back into their original positions with your finger or something else pointy (again, be cautious not to hurt yourself!). It’s possible that you’ll require the assistance of another person in this situation.

Once the levers have been reinstalled, check to see that they are in the correct position and then lower the seat lever until it is locked into position. Your flexsteel rocker recliner should be able to be turned on with a slight push of both hands from beneath it!

Why Does my Recliner not Stay Reclined?

It’s not uncommon for the recliner’s mechanism to be damaged or detached from its intended function.

The seat may not stay in place when you want it to because the lever has been adjusted.

Tighten a loose screw with a Phillips head screwdriver if the levers do not operate smoothly.

The footrest on a chair should be disconnected and positioned to your liking if you have one.

Adjust the chair’s height based on your sitting posture to avoid issues with the chair’s stability when you’re in a reclined position.

FAQs

Can I buy furniture directly from Flexsteel?

Authorized Flexsteel shops sell our home furnishings. Find Flexsteel is a great resource for finding the nearest Flexsteel retailer.

Can I find your furniture on other websites?

Flexsteel furniture is frequently featured on the websites of our merchants. You can acquire the most current pricing and inventory availability information by visiting one of their physical stores. Find Flexsteel is a great resource for finding the nearest Flexsteel retailer.

I’d like to locate a particular piece of Flexsteel furniture before I buy it. Can you help?

In order to help you locate the piece of Flexsteel furniture you’re looking for, we can’t access the inventory information of our approved Flexsteel dealers. Visit Find Flexsteel to learn where to find local Flexsteel retailers.

Can I get a product catalog?

Flexsteel.com has all of the product details. Product pages include color photographs that may be zoomed in on, as well as product information.

I want to buy a specific piece of furniture, but the store near me said they don’t have it. What do I do?

Flexsteel home furnishings aren’t always available at every retailer, so if you can’t find what you’re searching for, try another. A few nearby businesses may be able to help you out. Find Flexsteel is a great resource for finding the nearest Flexsteel retailer.

Apricity Outdoor Parkdale Transitional Sling Swivel Rocker Chair with Tall Back | Westrich Furniture & Appliances | Outdoor Dining Side Chairs

Can I get upholstery swatches?

Yes, you can purchase up to five upholstery swatches from Request Swatches. Our recommendation is to consult a Flexsteel furniture merchant in your area so you can see all the different possibilities for upholstery colors and materials firsthand. Our shops will assist you make the best choice for your furniture by sharing their knowledge of crucial variations in upholstery durability and cleanability. Find Flexsteel is a great resource for finding the nearest Flexsteel retailer.

The store I bought my furniture from isn’t there anymore. Who do I contact if I have a problem with my furniture?

Proof of purchase is required for warranty service at any authorized Flexsteel furniture shop. Find Flexsteel is a great resource for finding the nearest Flexsteel retailer.

Does Flexsteel offer re-upholstery service, or can you refer me to a reputable re-upholstery company?

We’re sorry, but we don’t provide re-upholstery. To determine if your local Flexsteel retailer can provide re-upholstery services or can recommend a good upholstery provider, please contact your local Flexsteel shop. Find Flexsteel to find out where the nearest Flexsteel retailer is located.

I need to purchase upholstery to match my Flexsteel furniture for a repair or for accent pieces. How do I go about purchasing Flexsteel upholstery?

Retailers of Flexsteel furniture are delighted to check on upholstery availability and place your order for you. Find Flexsteel is a great resource for finding the nearest Flexsteel retailer.

How do I know if a necessary repair is covered by the Flexsteel warranty? And, how do I make arrangements to get my Flexsteel furniture repaired?

Please notify the Flexsteel shop where you acquired your furniture of any issues as soon as possible and provide evidence of purchase. Depending on the warranty, your retailer will work with you to get the necessary repairs done.

Shipping and labor expenses will be your responsibility if your damaged furniture is older than a year old.

The store where I purchased my furniture has closed down. If I have an issue with my furniture, who do I contact?

Proof of purchase is required for warranty service at any authorized Flexsteel furniture shop. Find Flexsteel is a great resource for finding the nearest Flexsteel retailer.

Can I get leather touch-up kits for my Flexsteel leather furniture?

Leather touch-up kits are available through Uniters North America for any of our Flexsteel leather furniture. Visit unitersna.com or call 1.800.234.8986 to place an order.

Where is the warranty information for my furniture?

Please go to the Warranty page for further information.

What is covered under the Flexsteel reclining mechanism lifetime limited warranty?

Flexsteel’s reclining mechanism is covered by a lifetime warranty. Any faults with pivot rivets, cross tubes that connect the two hinges, or mechanism linkages should be reported to the manufacturer. Please contact your local Flexsteel retailer or check out the Warranty page for more information. Find Flexsteel is a great resource for finding the nearest Flexsteel retailer.

How do I file a warranty claim?

Please notify the Flexsteel shop where you acquired your furniture of any issues as soon as possible and provide evidence of purchase. Depending on the warranty, your retailer will work with you to get the necessary repairs done.

Shipping and labor expenses will be your responsibility if your damaged furniture is older than a year old.

Find Flexsteel is a great resource for finding the nearest Flexsteel retailer.

Can I order extra or replacement parts?

Flexsteel has a network of dealers across the country. Find Flexsteel is a great resource for finding the nearest Flexsteel retailer.

Can Flexsteel reclining mechanisms be serviced or replaced?

In fact, the Flexsteel mechanism will last for the entire life of the furniture! Rearranging the furniture, sitting on the arm or footrest, or overloading the furniture might bend the mechanics. You can get a replacement mechanism for a simple repair from your merchant because we understand this happens.

Please contact your local Flexsteel retailer or check out the Warranty page for more information. Find Flexsteel is a great resource for finding the nearest Flexsteel retailer.

How can I check on the status of my furniture repair work or my furniture order?

Your local Flexsteel shop can provide you with all the information you need to monitor the progress of your furniture order or repair work, so please don’t hesitate to contact them.

How should I close the footrest on my handle-activated reclining furniture?

If you have a Flexsteel reclining chair with a handle-activated footrest, simply press your feet down to close the footrest. It is possible to use the reclining handle to assist in closing, but be careful to use your feet to close the first two to three inches. The reclining mechanism will be damaged if the handle is used to close the footrest.

How do I operate my power reclining furniture?

Our Flexsteel Power Reclining Operating Instructions are available upon request.

To learn how to use the MyRecline F4 mobile app with your reclining furniture, see the MyRecline F4 User Manual.

How do I select the right fabric for my home furniture?

The American Society for Testing and Materials (ASTM) has given all Flexsteel fabrics a durability rating. The four wearability codes are HHH, MMM, LLL, or DDD, and are applied to all fabric samples. In the following, we’ll go over what each of these codes means.

Cabrisa High Back Swivel Rocker | Gabberts

A family with active youngsters may put this cloth to good use because of its HEAVY DUTY rating. Compared to textiles classified as Medium Duty, this one should last longer. During abrasion testing, it meets or exceeds 15,000 cycles.

Adults in homes with occasional usage of the furniture can safely use this MMM-rated fabric, which has a MEDIUM DUTY rating. Double Abrasion Testing shows that it is up to or more than 9,000 times stronger than the previous generation.

Furniture in an adult home that prioritizes aesthetics over function should be selected with this fabric, which has a LIGHT DUTY rating. If you don’t use it all the time, this fabric will satisfy your needs. In theory, it should be more durable than delicate fabrics, but it can’t be expected to function as well as heavy or medium-duty materials. The abrasion testing of 3,000 double cycles is met or exceeded with this product.

DDD — This fabric is classified DELICATE. It should be treated with greater respect than fabrics labeled Heavy Duty, Medium Duty, or Light Duty because it is primarily decorative. The American Society of Testing and Materials has adopted the Upholstery Fabric Industry Performance Standards, which give this fabric the minimum acceptable rating.

However, the fabric has been tested and fulfills the American Society of Testing and Materials Upholstery Fabric Industry Performance Standards, which have been authorized by the American Society for Testing and Materials (ASTM D13-73-12). If you’d want to know more about the quality of a product, you can look at the following: breaking strength (or lack thereof), ripping strength (or lack thereof), yarn slippage resistance (or lack thereof), and fabric shrinkage (or lack thereof).

How should I clean my Flexsteel fabric furniture?

The AHFA cleanability code is used to classify all Flexsteel fabrics for their ability to be cleaned. All Flexsteel furniture, save Latitudes Collection furniture, is shipped with a fabric cleanability code for the customer’s convenience. Latitudes Collection fabric cleaning codes may only be obtained from an authorized Flexsteel merchant. Find Flexsteel is a great resource for finding the nearest Flexsteel retailer.

Only professional upholstery cleaners are recommended by Flexsteel for the cleaning of your Flexsteel furniture. To locate an IICRC-certified upholstery cleaning company, visit their website at www.iicrc.org.

A water based shampoo or foam upholstery cleaning should be used to spot clean the area. Before moving forward, conduct a preliminary test in an unnoticed region. Make sure you’re not getting your hands too wet. Spot cleaning with chemicals is not recommended. In order to restore or reset the nap of pile fabrics, a soft-bristle brush may be necessary. There is no need to remove the cushion coverings and wash them. The zipper on the back of the loose cushions is purely for aesthetic purposes. Laundering zippered coverings is a waste of time and effort.

Dry cleaning solvents can be used for spot cleaning only. Before moving forward, conduct a preliminary test in an unnoticed region. Use sparingly. DO NOT USE WATER! To restore their appearance, pile textiles may need to be brushed with a nonmetallic, soft-bristle brush. Dry-cleaning the cushions’ covering is not recommended. The zipper on the back of the loose cushions is purely for aesthetic purposes. Zippered covers should never be taken off and dried cleaned because of the risk of damaging the zippers.

Spot clean with upholstery shampoo or a dry cleaning solution for furniture Before moving forward, conduct a preliminary test in an unnoticed region. Use sparingly. Brushing with a non-metallic, soft bristle brush may be necessary to restore the appearance of pile fabrics. Steam cleaning or hot water extraction is not advised for cleaning. There is no need to remove the cushions’ coverings and wash or dry-clean them. The zipper on the back of the loose cushions is purely for aesthetic purposes. Zippered coverings should never be taken off and subjected to the washing machine or the dryer.

Preventing soiling by using a non-metallic, soft-bristle brush or vacuuming on a regular basis is a good idea. The use of water-based foam or solvent-based cleaning agents of any kind can cause excessive shrinkage or fading.

What is fabric pilling, and how do I remove it?

A common problem with many fabrics is pilling, which occurs when extra fiber is shed from the fabric’s surface. Small “pills” or “balls” are formed on the fabric as a result of the extra fiber. Pilling will continue until the surplus fiber is expelled. To remove the pills and restore the fabric’s appearance, the simplest treatment is to use a battery-operated furniture or sweater shaver.

Flexsteel and the fabric mills are not liable for any pilling that occurs with their products. It is not uncommon for fabrics to show some degree of pilling, however this is not seen as a flaw by the industry.

How should I clean my Flexsteel leather furniture?

Leather furniture should be cleaned with a soft, clean cloth or vacuumed with a soft brush attachment once a week to keep it looking its best.

Does Flexsteel furniture use fire-retardant chemicals in its foam?

There are no fire-retardant chemicals in Flexsteel home furnishings. The flammability requirements of California TB 117-2013 have been met by Flexsteel fabrics introduced after January 1, 2015.

Does Flexsteel Furniture contain Formaldehyde?

No, all Flexsteel furniture is CARB (California Air Resources Board) compliant. In addition, none of our coatings contain any lead.

Can I order a slipcover for an existing Flexsteel piece?

Nothing but CARB (California Air Resources Board) compliant Flexsteel furniture can be used in your home! Our finishes are also lead-free.

Do you offer discounts to the trade?

We’re sorry, but those aren’t available from us.

I am a retailer; how do I get Flexsteel product in my store? Can I buy furniture directly from Flexsteel?

There are a number of solutions we can provide to shops. Please take a look at our Retail Opportunities page.

How do I find out the retail price of furniture?

We don’t provide retail pricing information.