How To Install Dosatron Systems Into An Irrigation System?

There are many ways to use Dosatron technology into an irrigation system. It is possible to precisely administer chemicals to your irrigation system with the help of a Dosatron chemical injector. You don’t have to worry about energy expenditures because they are hydro-powered. Because Dosatron systems use volumetric proportioning, the chemical measurements stay constant regardless of water pressure and flow.

As you can see, here’s the process: The hydraulic motor inside the injector will move up and down when the water enters the Dosatron. To mix the chemicals with the water flowing through the Dosatron system, a motor pulls fluid from a tank and discharges it into the mixing area when it travels up and down. The irrigation system will next be used to disperse this chemically-laced water.

Bạn đang xem: How To Install Dosatron Systems Into An Irrigation System?

What Goes into the Dosatron Chemical Injector?

Plants that live in a greenhouse will necessitate the application of additional nutrients to survive. A Dosatron injector will allow you to apply a variety of chemicals. Using the water system, you can apply pesticides, fertilizers, and fungicides. In addition, you can use it to apply detergents and disinfectants to the surface.

How to Install Dosatron Systems into an Irrigation System

Dosatron systems are simple to install into your irrigation system, but there are several stages involved. The Dosatron must be deflated, and the dose must be adjusted appropriately.

Deflate the Dosatron

Deflating the Dosatron is necessary before you may utilize it. In this manner:

1. Open a portion of the water valve.
2. The pump’s deflation button is located on top of it.
3. Once the water has flowed past the deflate button, let go and let it float away.
4. At this point, you can totally open the water supply because the pump is self-priming.
5. Take a break from pumping and wait until you see your mixture fill the dosage tube.
6. When you hear a click, the pump is ready to use.

Setting the Dosage

Setting the dosage of your pump is the next step. Make sure the pump is completely de-pressurized. Here’s how to figure out how much to take:

1. To release the pump’s pressure, close the inlet valve.
2. Remove the conical nut or obstructing ring.
3. When you get to the proper dosage, turn the nut to the left or right till it does.
4. Tighten the nut or ring that holds it in place.
5. One part concentrate to one hundred parts water is the dosing ratio for Dosatron pumps.

How Can You Maintain a Dosatron?

Maintaining the Dosatron on a regular basis is critical to its long-term viability. Dosing pumps can be damaged if dirt and crystalized concentrate build up within. A professional inspection is recommended at least once a year.

How Can You Replace and Maintain Dosatron Parts?

The non-return valve, seals, suction hose, and other parts should be replaced at least once a year to keep your Dosatron pump operating at full efficiency. Make careful to wear goggles, gloves, and other safety gear if you’re doing the work yourself. In order to prevent damage to the pump, do not use any tools at all.

Why Use a Mini Greenhouse for Your Plants?

If you’re planning to use the Dosatron system, a little greenhouse is an excellent investment for your plants.

Protect your plants from harmful pests

Insecticides can be injected into your garden using a Dosatron pump, discouraging hazardous pests. Keep your plants in a greenhouse to protect them from pests that would otherwise eat your plants’ leaves and produce.

Greenhouses come in all shapes and sizes

Xem thêm : How To Use A Cloning Machine? A Perfect Guide For You!

There is a common misconception that greenhouses are massive and have floor-to-ceiling windows. They can, however, be as little as a desk-top greenhouse or as large as a barn. It’s not necessarily necessary to have a huge greenhouse unless you’re a professional grower. A tiny greenhouse is more than adequate for most hobbyists and home gardeners.

Great for gardeners without much planting space

A modest greenhouse can help gardeners who enjoy cultivating plants but lack the space to do so. You may put them on your patio, deck, or balcony because of their regular six-foot size. There are smaller greenhouses that can even be placed on tables if a six-foot greenhouse is still too big for you. They have the same advantages as a large greenhouse, despite their size.

Start planting before the cold season begins

There is no need to wait until spring to begin planting in a tiny greenhouse. If you prefer, you can start your crops indoors and transport them to your garden as the weather warms up. Early planting means that you can harvest your crops earlier than you had originally planned.

Keep your plants safe from frost and ice

Root-bound frost and ice can kill your plants. Frost, ice, and the ever-changing temperature are all kept at bay when they’re housed in a greenhouse.

Final Thoughts

You and your crops will benefit from learning how to install Dosatron systems into an irrigation system. Injecting chemicals into your irrigation system does not necessitate that you manually count the amount of chemicals you use.

Nguồn: https://iatsabbioneta.org
Danh mục: Garden