Updated at: 30-05-2022 - By: Sienna Lewis

There are three options to choose from if you want to learn how to propagate impatiens. Seeds, cuttings, and dividing the plant are among the methods. The good news is that gardeners may easily increase the population of this wonderful bedding plant by using one of these simple ways.

However, if you are just beginning to grow plants, a greenhouse might be a fantastic option. Plants may have a hard time establishing in your area because of the unpredictable and severe circumstances. To ensure that your impatiens thrive, employ a greenhouse where you can regulate all of the variables that affect their growth.

Propagating Impatiens from Cuttings

Take Cuttings From Healthy, Mature Impatiens Plants

Impatiens’ growth tips should be snipped off in a 4- to 5-inch segment. Look for uninfested and disease-free parts. Impatien cuttings should be grown in the spring, according to Cornell University.

How to grow impatiens from cuttings | How to grow impatiens | Impatiens plant care - YouTube

Prepare the Cuttings

Leave two to four healthy leaves at the end of the cutting after removing the foliage from the bottom two inches.

Put Cuttings In Water

Add water to a glass or vase and place the cutting end in the vessel. To avoid leaf rot, make sure all foliage is elevated above water.

Provide Warmth and Light

Make sure the cuttings are kept in a warm, well-lit area. Overheating water in direct sunlight can cause harm to stems and new roots.

Check and Refill as Necessary

Replace any water that has evaporated by checking the reservoir regularly and re-filling it to the original level. If the water becomes hazy or stinky, you should change it.

Watch for Emerging Roots

Keep an eye out for roots in the next few weeks.

Plant the Rooted Cuttings

When the roots have grown to a length of 2 inches, divide the cuttings and plant them in individual pots.

Propagating Impatiens from Seed

Prepare the Seed Starter

Fill peat pots or seed starter trays with water.

Press the Seeds Into the Soil

Do not cover the impatiens seeds once they have been pressed into the soil. Impatiens seeds require appropriate illumination to grow, according to the University of Minnesota Extension.

Water the Seeds

Rinse the tray or pot thoroughly until the water runs freely through the bottom.

Provide Bright Indirect Light

Wrap the pots in clear plastic and place them in an area that receives bright indirect light. The plastic helps retain moisture and raises the humidity level, resulting in faster germination.

How to grow impatiens from cuttings - YouTube

Check Daily for Moisture

Every day, check the seeds. Open a corner of the plastic if the soil appears damp or if extra water has collected inside the plastic.

Keep the Soil Warm and Moist

Keep the soil moist for 14 to 21 days until the seeds germinate. Soil temperatures between 70 and 75 degrees Fahrenheit are ideal for germination.

Move the Seedlings

As soon as the seeds have sprouted, take them to a sunny window where they can get filtered light.

Things You Will Need

  • Knife
  • Vase or jar in a clear color
  • Plant trays or peat pots
  • Peat pots, or plant trays, can be used to grow plants.


For optimal results, start impatiens from seed 12 weeks prior to planting time.

Water seedlings from the bottom to minimize damping off, and avoid wet soil.


Make sure that the soil isn’t too hot for impatiens seeds to germinate if they’re wrapped in plastic in direct sunshine.

Rooting Impatiens Cuttings in Soil

Cuttings are used to propagate the majority of impatiens plants. Cut the impatiens stem immediately below a leaf node on a non-flowering stem with at least two leaf nodes. Impatiens stem cuttings are typically between 8 and 15 centimeters in length. As an option, the ends can be immersed into rooting hormone. Use potting soil, vermiculite, or perlite to moisten each impatiens cutting before inserting it into planting trays or pots. Pencils or even your finger can be used to draw in the holes.

Insert the impatiens cuttings gently into the soil after pinching off any lower leaves. Set these in bright, indirect light and water them liberally. In addition to being transplanted, impatiens cuttings can be planted directly in the garden. It’s best to plant them directly into the ground, in an area that receives some shade.

Rooting of impatiens might take anything from a few weeks to a month. It is possible to move the plants to their final position after they have been rooted.

How to Root Impatiens in Water

Water can also be used to root impatiens. Using this procedure, cuttings of impatiens grow quickly. Remove the lowest leaves and submerge the cuttings up to the first few nodes in water. Place it in a well-lit area, such as a window sill, that isn’t in direct sunlight. Fresh and clean water should be replaced on a daily or at least every other day basis. The rooted impatiens cuttings can then be moved to a new permanent site after a successful impatiens rooting process.

How To Propagate Impatiens Easily

Method #1. Propagating impatiens from seeds

What’s the best way to harvest impatiens flower seeds? Despite the fact that you can buy or gather them yourself, the word “impatiens” comes from the way they scatter seeds when touched just a little bit. If you keep this in mind, you’ll understand why it’s so simple to grow this plant from seed.


Ten weeks before you plan to plant your impatiens outside, start sowing the seeds you’ve collected or purchased in the greenhouse. You can use a typical pot or planting trays and use a moist starting medium. Because impatiens sprout in the light, you don’t need to cover the seeds when planting them; simply press them into the soil.


Ten weeks before you plan to plant your impatiens outside, start sowing the seeds you’ve collected or purchased in the greenhouse. You can use a typical pot or planting trays and use a moist starting medium. Because impatiens sprout in the light, you don’t need to cover the seeds when planting them; simply press them into the soil.

You can start spreading impatiens seeds in the greenhouse ten weeks before you plan to transplant them outside once you’ve harvested or brought them. You can use a regular pot or planting trays and utilize a moist starting medium. Because impatiens sprout in the light, there is no need to cover the seeds before planting them.

For this reason, some gardeners choose not to use impatiens because of their long germination times (up to 21 days). Because of this, it is possible to speed up the process of germination when you cultivate them inside. Seeds can germinate in 14 days if the soil temperature is between 70 and 75 degrees Fahrenheit.

Method #2. Propagating impatiens from cuttings

Another benefit of using a greenhouse for impatiens propagation is that it may be used to cultivate parent plants. In comparison to sowing seeds, you may root impatiens from cuttings in a much shorter period of time, and you’ll obtain identical plants. Methods two and three are more appropriate if you want to maintain cultivars.

How to Grow and Care for Impatiens | Gardener's Path

Gathering cuttings

Even yet, a healthy parent plant is required for successful cutting propagation. To ensure that their plants are ready for cutting in the morning, some gardeners water their plants at night. You can remove a 5-inch portion of a stem that is devoid of illness and abnormalities.

Preparation and cutting

Next, remove the lowest leaves off the stems of the cuttings. It’s best if you leave two to four leaves on the top of the last two inches before rooting. Make sure the leaves aren’t soaked by placing the cutting in a water-filled container.

Cuttings, like seeds, thrive in a location that is well-lit but not in direct sunlight. You won’t have to worry about the plant getting burned or overheated this way. Replace the water when it becomes hazy, and keep an eye on the level to make sure it doesn’t fall too low.

It will take a few weeks for the roots of impatiens cuttings to grow long enough to start putting them in their medium.

Method #3. Propagating impatiens from division

By dividing an impatiens plant, you can easily make multiples of it. If the root ball of the parent plant is large enough, you may be able to grow numerous plants from it. Remove the plant by gently lifting it out of the ground.


Some gardeners prefer to use a knife to make the process easier, while others prefer to divide by hand and pull the roots apart. The roots should be cut at a 13 upwards and all the dead roots should be removed. These portions can then be planted like a young plant.


As long as it has sufficient drainage, you can use regular potting soil. At this point, you may also want to add some slow-release fertilizer. Maintaining soil moisture and allowing it to drain effectively are both critical to successful establishment.

In the greenhouse, you can place it somewhere warm and light. You can also encourage growth by trimming the top of the foliage at about one-third.


You can keep it warm and well-lit in the greenhouse. You can also encourage growth by trimming the top of the foliage at about one-third.

You can put it in the greenhouse where it will be both warm and bright. Trimming the top third of the foliage might also boost growth.

Keeping the correct circumstances, such as moisture and bright indirect light, will ensure that your impatiens root and grow.