One of the worst things that can happen to an electrical equipment, such an LCD television, is for it to come into contact with water. Water causes corrosion and a short circuit in the metal pathways of the circuit board, rendering the board inoperable. If your TV becomes wet, you need to get it dried off as soon as possible. Water damage to a circuit board is not necessarily catastrophic if the board is allowed to dry out thoroughly before being used again.
- How To Install Portable Air Conditioner Without Window? Comprehensive Guide
- How To Restuff A Pillow? Everything You Need To Know
- How To Seal A Window Air Conditioner For The Winter? A Few Tips to Remember
- How To Know If Bed Bugs Are Gone? A Few Tips to Remember
- Diy Project How To Build A Swivel Seat? Choosing a Rotating Swivel Seat for a Van
Step 1 – Unplug the TV
If you need to replace something, you should look at what Amazon has to offer.
It may seem like a no-brainer, but as soon as you have noticed that the television has suffered water damage you will need to immediately unplug the television set. In addition, you may find that relocating it from its current location is a simpler option. This is, of course, conditional upon the extent of the water damage. If there is enough for it to leak, the television will definitely have to be moved from its current location.
Step 2 – Blow Dry the Affected Area
It’s possible that the water damage to your TV can be mitigated by just blow drying the affected area. It’s best not to overheat the areas in question. If your blow dryer has a “cool” option or button, using it on the lowest heat setting is recommended. To “remove” the moisture from electrical connections and prevent corrosion, degradation, and future breakdowns, blow air at a considerably decreased pressure over the affected region using a compressor.
Step 3 – Be Patient
In many cases, it’s best to wait until the water evaporates on its own. Placing the TV in a well-ventilated room for a few of days will help it dry out. The reality is that this is sometimes your only option. Depending on where the TV was damaged, you may need to remove the back in order to let it dry out. If you want to test whether or not your TV is fixable, you should reassemble it after it has dried for a few days and then plug it in.
Step 4 – Repairman
If you’ve exhausted these options without success, you may need to take your TV to a repair shop. To get your TV fixed, you need to phone the manufacturer and describe the extent of the water damage. A phone quote may be available to help you decide whether or not to have the water-damaged TV repaired.
Step 5 – Replacement
If things keep going downhill, you may need to buy a new TV. Buying a used one is an option you should consider. Check out a variety of online secondhand appliance retailers. Make sure to inspect the television carefully and ask lots of questions before making a purchase. This will do till you can afford a new one.
Preventative measures you can do to protect your TV
Most of us can’t afford to be without a TV, and we don’t have the time or money to fix one if it breaks. That’s why we built in safeguards to keep your TV working smoothly for years to come.
Keep away from cold temperatures
Condensation caused by cold temperatures might leak into your TV and cause damage to its internal parts. That’s why it’s a bad idea to turn on the tube when it’s below freezing outside.
Vacuum your TV
However, moisture isn’t the only thing that can seep through your TV and cause harm in chilly climates. Like condensation, dust can cause problems for your TV.
They get in there and wreck things, and the TV is all sluggish because of the dust. Electronic vacuum pumps can be used to remove dust from your TV.
Place your TV in a well-ventilated place
Like you, your TV needs fresh air, so make sure to set it up in a well-ventilated space. This is due to the fact that it uses a lot of electricity and so produces a lot of heat. If your TV has some room to breathe, it won’t overheat as easily.
Use a voltage regulator or surge protector
If you live in a region where power outages are common, you run the risk of damaging your appliances and electronics from voltage spikes. This is bad news for your TV and other devices, so a voltage regulator is suggested.
This is an obvious piece of advice that many people neglect. It’s important to keep your TV clean to prevent dust buildup.
Also, by keeping a tight eye on things, you may check your TV for any potential issues. Don’t use water to clean your TV, though.
Does TV insurance cover water damage?
Under certain circumstances, yes. If your TV is damaged by a covered event, you can file a claim with your insurance company.
If a storm destroys your television, for instance, you can file a claim. However, it is not likely to be covered by your homeowner’s insurance if it is damaged in a house accident.
But if you want specifics, your attorney can help you with your insurance claim and coverage.
We hope that your TV stays with you for a long time once you’ve learned how to remedy water damage and how to extend its life. We also wish you’d found our piece on TVs that’d been damaged by water useful.